-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Case Study: Reducing Defects Caused by Excess Handling and Mishandling
May 26, 2016 | Yash Sutariya, Saturn Electronics/Saturn Flex SystemsEstimated reading time: 1 minute
Most folks associate quality improvement initiatives with upfront expenses and ongoing cost increases. Fortunately, when done efficiently and with enough forethought and planning, quality improvement programs can pay for themselves in the form of increased throughput, reduced labor steps, and reduction in materials consumption. Increased yield improvements are then a pure bonus. The following project, centered on Saturn’s LPI solder mask operation, was implemented about 13 years ago and details just such an example. It was one part of a comprehensive review of our processes prompted by customer complaints of scratches on their incoming PCBs. The results, including a customer award, galvanized us to our current continuous improvement modus operandi.
Cleanroom Fixes Following LPI solder mask application, panels were partially cured in a tunnel oven and then scheduled for LPI imaging. A number of cosmetic defects were found to be related to mishandling and air cleanliness of the imaging area. To reduce mishandling, a new transportation cart system was implemented. To reduce opens due to dust, the entire area was enclosed with clean room curtains and station HEPA filters with particle counting machines.
Read the full article here.
Editor's Note: This article originally appeared in the May 2016 issue of The PCB Magazine.
Suggested Items
Indium Corporation Expert to Present on Pb-Free Solder for Die-Attach in Discrete Power Applications
04/30/2024 | Indium CorporationIndium Corporation Product Manager – Semiconductor Dean Payne will present at the Advanced Packaging for Power Electronics conference, hosted by IMAPS, held May 8-9 in Woburn, Massachusetts, USA.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.