NUS Engineering Team Designs Novel Multi-field Invisible Sensor
June 3, 2016 | NUSEstimated reading time: 2 minutes
A team of researchers from the National University of Singapore (NUS) has invented a novel camouflage technique that effectively hides thermal and electronic sensors without compromising performance. Led by Assistant Professor Qiu Cheng-Wei from the Department of Electrical & Computer Engineering at NUS Faculty of Engineering, the team created the world’s first multifunctional camouflage shell that renders sensors invisible in both thermal and electric environments.
Current technologies which make sensors ‘invisible’ usually also make them ineffective, while others only work in specific physical fields (i.e. either thermal or electrical). Over the past ten months, the NUS team has experimentally demonstrated that they could hide sensors in both thermal and electric fields without them being detected. The invisible sensors are also able to continue to probe on the environment while ‘under cover’.
Asst Prof Qiu explained, “We have designed a camouflage ‘shell’ that not only mimics surrounding thermal fields but also electric fields, both at the same time. The object under camouflage becomes truly invisible as its shape and position cannot be detected in terms of both thermal and electric images.”
In their experiment, they created an ideal invisible sensor by covering it with a thin shell which is made of pure copper. The shell is designed to drastically reduce the perturbation of heat flux and electric current simultaneously. The thickness of the shell is fabricated based on detailed calculations to allow precise manipulation of external multi-physical fields to insulate the sensor and hence render it invisible and yet allows it to receive incoming signals from outside.
“Our camouflaging shell will open up a new avenue for advanced sensing and security systems. Sensors which are used to monitor current and heat flow in strong voltage or high temperature environments are easily damaged. Our camouflaging shell hence protect such sensors from the harsh environment and at the same time enhance the accuracy of the hidden sensor, as the shell will eliminate any distortion around the sensor. This attribute is significant in our study of other applications such as using the camouflaging shell on special mission fieldtrips. The team is also working on developing multifunctional invisible sensors that have instantaneous stealth ability,” added Dr Qiu.
Drawing a comparison with the chameleon, from which the team had drawn inspiration to develop the novel camouflaging shell, Dr Qiu said, “The skin of a chameleon is made up of several layers of specialised cells containing various pigment while the outermost layer is transparent. The cells beneath the skin change colour based on light intensity and temperature as well as the chameleon’s mood. Our team’s invention can be seen as an improved “skin” for the chameleon such that it will become invisible when it appears in front of thermal and electric signal detectors!”
Suggested Items
The Chemical Connection: Reducing Etch System Water Usage, Part 2
05/02/2024 | Don Ball -- Column: The Chemical ConnectionIn my last column, I reviewed some relatively simple ways to reduce water usage in existing etch systems: cutting down cooling coil water flow, adding chillers to replace plant water for cooling, lowering flow rate nozzles for rinses, etc. This month, I’ll continue with more ways to control water usage in your etcher. Most of these are not easily retrofittable to existing equipment but should be given serious consideration when new equipment is contemplated. With the right combination of add-ons, it is possible to bring the amount of water used in an etch system to almost zero.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.