Fujitsu Develops AI-Utilization Platform for Design and Manufacturing
June 9, 2016 | ACN NewswireEstimated reading time: 4 minutes
Fujitsu today announced the addition of an expert consulting service for the use of AI technology at design and manufacturing sites to its MONOZUKURI Total Support Solutions, which support customer manufacturing. This service will be available in Japan starting October 2016. As its platform, the service will use the MONOZUKURI AI Framework(1) to systematize functions for incorporating AI into manufacturing locations.
MONOZUKURI AI Framework is an AI-usage platform that implements Fujitsu's AI technology, Human Centric AI Zinrai, and is made up of learning databases, AI processing engines, security authentication servers, and so forth. This platform is being offered based on the experience gained from using it as a smart manufacturing platform at Fujitsu's manufacturing locations.
The consulting service will support the implementation of AI technology in customer manufacturing locations by building a learning database for each of the variety of task processes and products in design and production locations, using the MONOZUKURI AI Framework to enable increased AI precision through continuous learning, and also by screening the collected data in response to the customer's needs and the characteristics of their products, tuning the data in order to improve prediction accuracy.
In this way, the service will contribute to the customer's manufacturing transformation, for example, by shortening design studies for printed circuit boards or enabling improved efficiency in setting up production lines, and by providing a system that continuously learns.
In order to make use of AI, it is necessary to extract knowledge and experience from the big data acquired from previous assets and locations, collect it in learning databases, and create a model with it. In manufacturing locations, however, there are all sorts of products and a variety of business processes, such as specification studies, design, validation, and manufacturing, and because standardized models which can provide the high-accuracy predictions and decision processing demanded for each of these cases do not exist, it is necessary to build appropriate models each time.
Fujitsu has developed the MONOZUKURI AI Framework, which can distinguish between and appropriately use learning models for each business process and product, and will offer it as part of a consulting service.
Features of the MONOZUKURI AI Framework
1. Builds learning databases for each usage context
Manufacturing involves all sorts of business processes, such as specification studies, design, validation, and manufacturing, for an array of different products. In order to provide highly accurate predictions and decision processing for each of these cases, different learning databases are built for each.
2. Improved prediction accuracy through generation-management functions
By undertaking generation management of the learning databases for each cycle of product design and production, the system optimizes itself through continued learning the more it is used, improving prediction accuracy. This means AI can be used even with new products under development, enabling stable operations.
3. Strong security functionality
The system protects its important learning databases through user authentication and communications encryption.
4. Easy to combine with existing systems
The system features a standardized set of web APIs, making it easy to link with customers' existing systems and programs. This makes it possible to use AI for prediction and data generation in customers' CAD platforms and production-line machines, for example.
Example Uses of the MONOZUKURI AI
1. Design support for printed circuits in electronics design (Estimating number of circuit layers)(2)
By using AI and inputting the features of a new product, this service can predict the number of layers necessary in the printed circuit board from the learning database. This can enable a reduction in the printed circuit board design process of approximately 20%.
2. Search 3D models for similar components(3) in structural design
When searching for similar components with 3D models, as when searching with a 3D model of a screw, for example, this service has improved search accuracy to 96% by using AI, as compared to 68% previously. These fast and accurate searches of similar components using AI can be used in a variety of situations, such as re-using design data that used old components of similar shapes, or searching for the use of faulty components in other products.
3. Automatic creation of image-recognition programs(4) for production lines
With programs that use image recognition by production line cameras to detect component positions and shapes, the correct data is learned, and it is possible to automatically create programs that realize highly accurate recognition. In an internal study, compared to an image-recognition engineer developing a program, use of this technology cut development time to one tenth, and improved image-recognition accuracy by up to 97%.
Consulting Service for Introduction of AI to Manufacturing Sites
The number of customers considering the use of AI at their manufacturing sites is increasing. However, a lack of precedents has made it difficult to actually move forward with deployment. Through its consulting service, Fujitsu will transform the manufacturing processes of its customers, by continuously improving its AI technologies through issues extraction, POC, data screening, and data tuning.
Suggested Items
ZESTRON Academy Launches 2024 Advanced Packaging & Power Electronics Webinar Series
05/01/2024 | ZESTRONZESTRON, the leading global provider of high-precision cleaning products, services, and training solutions in the electronics manufacturing and semiconductor industries, proudly announces the launch of its highly anticipated webinar series on Advanced Packaging & Power Electronics, a webinar series on the latest innovations, cleaning, and corrosion challenges.
NextFlex Convenes the Hybrid Electronics Community at Binghamton University
05/01/2024 | NextFlexBinghamton University hosted the NextFlex hybrid electronics community on April 18 for a day of expert presentations, breakout sessions on technology and manufacturing topics, and networking.
HQ NextPCB of HQ Electronics Debut on the International Stage for Electronics Manufacture at IPC APEX 2024
05/01/2024 | PRNewswireHQ NextPCB of HQ Electronics, a leading Chinese-based multilayer PCB manufacturer and assembly house showcased its industrial prowess on the international stage for the first time at the IPC APEX Expo 2024.
All-Inclusive: PRIDE Industries Helps Employees With Disabilities to Succeed
05/01/2024 | Sandy Gentry, IPCPRIDE Industries is the leading employer of people with disabilities and those with other barriers to employment in the United States, including veterans and former foster youth. The company offers job training, placement, on-the-job coaching, and skills development for independent living. It has held IPC membership since 2000. Read more about this unique business and its connection to the electronics manufacturing industry.
U.S. Companies Invest Heavily in Robots
04/30/2024 | IFRManufacturing companies in the United States have invested heavily in more automation: total installations of industrial robots rose by 12% and reached 44,303 units in 2023. Number one adopter is the car industry followed by the electrical and electronics sector.