New 'Ukidama' Nanoparticle Structure Revealed
June 14, 2016 | OISTEstimated reading time: 3 minutes
Sometimes it is the tiny things in the world that can make an incredible difference. One of these things is the nanoparticle. Nanoparticles may be small, but they have a variety of important applications in areas such as, medicine, manufacturing, and energy. A team of researchers from Okinawa Institute of Science and Technology Graduate University (OIST) recently discovered a unique copper-silver nanoparticle structure that has a core of one element surrounded by a “cage” of the other element. However, the cage does not cover certain areas of the core, which very much resembles the Japanese glass fishing floats traditionally covered with rope called ukidama.
This previously undiscovered ukidama structure may have properties that can help the team on their mission for optimal nanotechnology. The results have been published in Nanoscale.
“The ukidama is a unique structure, which means that it can likely give us unique properties,” said Panagiotis Grammatikopoulos, first author and group leader of the OIST Nanoparticles by Design Unit. “The idea is that now that we know about this structure we may be able to fine tune it to our applications.”
The OIST researchers are continually working to create and design nanoparticles that can be used in biomedical technology. Specifically, the team works to design the optimal nanoparticles for technologies like smart gas sensors that can send information about what is going on inside your body to your smart phone for better diagnoses. Another application is the label free biosensor, a device that can detect chemical substances without the hindrance of fluorescent or radioactive labels. The identification of the ukidama structure is important in this endeavour because having a new structure increases the possibilities for technological advancements.
“The more parameters that we can control the more flexibility we have in our applications and devices,” Prof. Mukhles Sowwan, author and head of OIST’s Nanoparticles by Design Unit said. “Therefore, we need to optimize many properties of these nanoparticles: the size, chemical composition, crystallinity, shape, and structure.”
The discovery of the ukidama structure was found through sputtering copper and silver atoms simultaneously, but independently, through a magnetron-sputtering system at high temperatures. When the atoms began to cool they combined into bi-metallic nanoparticles. During the sputtering process, researchers could control the ratio of silver to copper, with the rate of power with which the atoms were sputtered. They found that the ukidama structure was possible, especially when the copper was the dominant element, since silver atoms have a higher tendency to diffuse on the nanoparticle surface. From their experimental findings, the team was able to create simulations that can clearly show how the ukidama nanoparticles form.
The team is now looking to see if this structure can be recreated in other types of nanoparticles, which could be an even bigger step in the optimization of nanoparticles for biomedical application and nanotechnology.
“We design and optimize nanoparticles for biomedical devices and nanotechnology,” Sowwan said. “Because the ukidama is a new structure, it may have properties that could be utilized in our applications.”
Co-author, Antony Galea, formerly of the Nanoparticles by Design Unit, was responsible for the experimental portion of this study and has since moved to OIST’s Technology and Licensing Section to help research – like this work being done with nanoparticles that can be utilized in applications – move into the market.
“Our aim is to take research created by OIST from the lab to the real world,” Galea said. “This is a way that work done at OIST, such as by the Nanoparticles by Design Unit, can benefit society.”
Suggested Items
The Chemical Connection: Reducing Etch System Water Usage, Part 2
05/02/2024 | Don Ball -- Column: The Chemical ConnectionIn my last column, I reviewed some relatively simple ways to reduce water usage in existing etch systems: cutting down cooling coil water flow, adding chillers to replace plant water for cooling, lowering flow rate nozzles for rinses, etc. This month, I’ll continue with more ways to control water usage in your etcher. Most of these are not easily retrofittable to existing equipment but should be given serious consideration when new equipment is contemplated. With the right combination of add-ons, it is possible to bring the amount of water used in an etch system to almost zero.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.