-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
The Sum of All Parts: The Fabricator-Assembler Connection
June 20, 2016 | Sam Sangani, PNC Inc.Estimated reading time: 3 minutes
After discussing the relationship between PCB fabricators and those who design the boards (see my previous column ), it is imperative to do the same for the relationship between assemblers and fabricators. This brings about a whole new set of potential complications.
For example, a board manufacturer may not fully understand the scope of panel size limitations for the SMT line in question or if rails are needed on individual pieces/panels so that the pick & place machine has sufficient room to place the components that are close to the board’s edge. You may also have a situation where a component overhangs off the edge of a board. To be sure in can be placed, if in panel form, then the panel array will need additional space between boards so there is no interference of the part to the next board in the array.
Logistical Challenges
The supply of parts is a very crucial element of this relationship. Most assembly houses do not stock an inventory of components for the simple fact that it does not make business sense; every customer will require different parts from job to job and revision to revision. For the assembler to purchase and sit on various parts they think their customers might need is essentially just an increase in toxic, unusable assets that hurt the bottom line. You might have capacitors, resistors etc., with the exact value your customers need, but if it is not made by the manufacturer they desire or supplied by their preferred vendor, the assembler is left with an unusable part.
However, if a board house also has the ability to assemble, it lends to a number of advantages. First and foremost, the customer is able to rely on an accurate and unchanging quote from their manufacturer/assembler. Furthermore, when the customer is given a date on which their job will be completed, their job is actually completed on that date. They are not waiting to receive the bare board from one place and then send it out to another place to be populated—at which time the wait begins all over again. The speed of this process—end to end—is also accelerated significantly.
Packaging and Cleanliness
This in crucial in today’s market when customers expect their boards to be pristine and understandably so. The packaging and shipping processes can cause unnecessary cosmetic and damage to the board. The boards should be vacuum sealed with desiccant. Desiccant is vital to eliminate any moisture that can potentially absorb into the board in transit as well as sitting on the assembler’s shelf until they are assembled. In the case of immersion silver final finish, silver saver paper needs to be inserted between each board to keep the silver from oxidizing. ESD handling can also be a potential issue. When the board is manufactured and populated at the same location, however, you minimize the possibility of these and related errors occurring.
Uniformity of Process
Quality control can be greatly affected when separate entities are handling the manufacturing and assembly processes. Also, there is a great disconnect in the communication between the manufacturer and assembler. Some customers choose to be the ones to relay information between the two parties whereas others may simply choose to hand the ball off to the people working for them. The ideal scenario in this situation is a balance between those two scenarios where the input of the customer, manufacturer and assembler is taken into account and valued equally.
Similar to the designer-manufacturer relationship, the most comprehensive solution to this problem is the Total Concept. If manufacturing and assembling are done under the same roof, the space in which errors can occur is marginalized exponentially.
Although it seems like conventional wisdom, it is not always so. Simply put, the less distance there is between two processes, the less room for error.
Sam Sangani is president and CEO of PNC Inc.
Suggested Items
Micron First to Ship Critical Memory for AI Data Centers
05/01/2024 | MicronMicron Technology, Inc. announced it is leading the industry by validating and shipping its high-capacity monolithic 32Gb DRAM die-based 128GB DDR5 RDIMM memory in speeds up to 5,600 MT/s on all leading server platforms.
HQ NextPCB of HQ Electronics Debut on the International Stage for Electronics Manufacture at IPC APEX 2024
05/01/2024 | PRNewswireHQ NextPCB of HQ Electronics, a leading Chinese-based multilayer PCB manufacturer and assembly house showcased its industrial prowess on the international stage for the first time at the IPC APEX Expo 2024.
GPV’s Q1 2024 Interim Financial Report Shows Strong Navigation in Uncertain Times
05/01/2024 | GPVDanish-based GPV recorded an expected drop in sales to DKK 2.3 billion for the first quarter of 2024. The decline also affected the operating profit, which was DKK 155 million compared to DKK 179 million in the same quarter last year, although the EBITDA margin was maintained. In general, demand has been softer in 2024, but GPV continues to invest for the long-term and expects the trend to turn in the second half of 2024.
The Knowledge Base: A CM’s Perspective on Box Build Practices
04/30/2024 | Mike Konrad -- Column: The Knowledge BaseIn the ever-evolving landscape of electronics manufacturing, the box-build process stands out as a critical phase that bridges the gap between individual component manufacturing and the delivery of a fully functional electronic system. This intricate procedure, encompassing the assembly of everything from PCBs to wire harnesses and mechanical enclosures, demands a high level of precision, efficiency, and innovation. As the electronics assembly industry expands and diversifies, understanding the best practices within box-build assembly has become paramount for manufacturers aiming to stay ahead in a competitive market.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/26/2024 | Andy Shaughnessy, Design007 MagazineIn this week’s roundup, we have a variety of articles covering everything from design through assembly, and even box build. I’ve always wondered whether box build was all it was cracked up to be. Do customers really pick one EMS provider over another because one company offers box build? And if you’ve ever wanted to volunteer, IPC’s Thought Leaders Program is looking for a few good technologists to help them on their mission. Check out Stanton Rak’s article, which was published in the spring issue of IPC Community.