Global Sourcing Spotlight: Tariffs—The New Reality
Knocking Down the Bone Pile: Gold Mitigation for Class 2 Electronics
Punching Out: Your Financial Preparation for a Sale
To Bake or Not to Bake: Examining the Impact of Waiving PCB Pre-Baking Prior to Assembly
November 15, 2016 | Yash Sutariya, Saturn Electronics/Saturn Flex SystemsEstimated reading time: 1 minute
I’ll always remember the summer of 2004 as the “Summer of Lead-Free.” Finally, Pb-free circuit boards were going into standard production mode. Assemblers focused the majority of their efforts (often at my behest) on final finish and proper laminate selection. What none of us saw coming, however, was the rash of delamination that would burn the entire industry during that long, hot lead-free summer.
After a good amount of research, Isola came up with a Lead-Free PCB Fabrication and Assembly Guideline that outlined various steps in the PCB fabrication and assembly processes that are critical to successful lead-free PCB assemblies. The most prominent process step that was added in this guideline is baking—during fabrication and, most critically, just prior to assembly. The goal of baking is simply to drive moisture out of the PCB.
Moisture plays a critical role in lead-free PCB assembly. Therefore, it is important to discern the specifications of your base laminate. One knee-jerk reaction of North American PCB users was to specify what they believed to be the highest end laminates, those that qualify under IPC 4101/126 and /129 slash sheets. These are typically phenolic-cured materials, which have much higher thermal properties in terms of glass transition temperature (Tg) and decomposition temperature (Td) that are required to survive lead-free assembly without via failure.
Unfortunately, other properties of the laminate and assembly temperatures create a perfect storm for reliability failures. These include: moisture absorption, interlaminate adhesion strength, and water vapor pressure at lead-free assembly temperatures.
Moisture Absorption
Moisture absorption of phenolic materials is more than 2x as compared to traditional FR-4 materials that qualify under IPC 4101/21. In the early days, the technical data sheets used a 0.028" thickness core material for moisture absorption measurement. Based on this test vehicle, phenolic laminates showed moisture absorption of 0.45%; comparatively standard FR-4 laminates scored a 0.20% rate of moisture absorption. Over time, I think someone got wise and changed the test vehicle to a 0.059" thickness core, thereby increasing the denominator of the weight loss calculation. This resulted in a moisture absorption rate of 0.20%, matching the rate of standard FR-4 laminate.
To read this entire article, which appeared in the November 2016 issue of SMT Magazine, click here.
Share on:
Suggested Items
Canadian Circuits Inc. Unveils Rapid Prototype PCB Assembly Service to Accelerate Innovation
05/14/2025 | Canadian Circuits, Inc.Canadian Circuits Inc. (CCI), a leading provider of high-quality, made-in-Canada, Printed Circuit Board (PCB) solutions, is proud to announce the launch of its Prototype PCB Assembly (PCBA) service. This new offering enhances CCI’s commitment to empowering engineers and OEMs by accelerating the journey from concept to product launch with precision and efficiency in electronics manufacturing.
AMI Achieves 52 Consecutive Weeks of First Pass Yield Rates Above 98.72%
05/06/2025 | Alternative Manufacturing, Inc.AMI, a leading provider of high-quality PCB assembly (PCBA) solutions, proudly announces the achievement of 52 consecutive weeks of first pass yields at test, maintaining an exceptional success rate of 98.72% or better. This remarkable accomplishment underscores the company's unwavering commitment to manufacturing excellence, quality assurance, and customer satisfaction.
Alternative Manufacturing Inc. (AMI) Appoints Gregory Picard New Business Development Manager
05/01/2025 | Alternative Manufacturing, Inc.Alternative Manufacturing Inc. (AMI) is pleased to announce the appointment of Mr. Gregory Picard as our new Business Development Manager. Picard brings a wealth of experience in Sales and Business Development, having worked with some of the most prominent names in the industry.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/25/2025 | Nolan Johnson, I-Connect007I’m highlighting a discussion on the positive potential coming from the recent changes in global trade policy—from IPC’s Government Relations team, and from TTM CEO Tom Edman. In the realm of designers and purchasers realm, there’s news from Screaming Circuits and ASC/Sunstone Circuits to share. Finally, additive manufacturing and the release of CFX 2.0 highlight just some of the news coming to the shop floor as well.
HEITEC Expands Deployment of Aegis Software’s FactoryLogix MES to Boost Sustainable Manufacturing
04/23/2025 | Aegis SoftwareAegis Software, a global provider of Manufacturing Execution System (MES) software, announces that HEITEC’s business unit Elektronik, a leading manufacturer of complex electronic solutions based in Eckental, Germany, is expanding its use of the FactoryLogix® MES platform to additional products.