Knocking Down the Bone Pile: Best Practices for Electronic Component Salvaging
Global Citizenship: Together for a Perfect PCB Solution
Smart Automation: Odd-form Assembly—Dedicated Insertion Equipment Matters
Goepel Adds Solder Bead Detection Function in AXI System
November 16, 2016 | GOEPEL ElectronicEstimated reading time: Less than a minute
The automatic X-ray system X Line·3D from GOEPEL electronic now has a new test function for automated detection of solder beads. Solder residue of this type frequently occurs in the production process and has various causes. Since they can cause short circuits, they represent a significant danger for safety critical applications, e.g. in the automotive industry.
The new test function of the system software PILOT AXI offers fully automated examination of the entire assembly for solder beads. The detection is independent of flux residue, solder resist and general impurities. Due to its higher density, the solder is more contrast-rich in the X-ray image and can be detected with the least pseudo-error rate. As opposed to a pure optical inspection, the X-ray technology is independent of reflections or shadows on the assembly. In the same way, solder residue situated under component housings can be found.
Solder beads occur due to various causes during wave, selective and reflow soldering. The risk is particularly high for large-area solder joints, e.g. for QFN heat sinks or pin-in-paste connectors.
Share on:
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
Knocking Down the Bone Pile: Best Practices for Electronic Component Salvaging
09/17/2025 | Nash Bell -- Column: Knocking Down the Bone PileElectronic component salvaging is the practice of recovering high-value devices from PCBs taken from obsolete or superseded electronic products. These components can be reused in new assemblies, reducing dependence on newly purchased parts that may be costly or subject to long lead times.
Koh Young, Fuji, and Kurtz ERSA Drive Smart Manufacturing Solutions for EV and Automotive Electronics at Kunshan, China Technical Seminar
09/11/2025 | Koh YoungKoh Young Technology, the global leader in True 3D measurement-based inspection solutions, partnered with Fuji Corporation and Kurtz ERSA to host an exclusive technical seminar for leading automotive manufacturers in East China. Held on September 4 at Fuji’s factory in Kunshan, the event gathered participants representing over 35 companies.
MacDermid Alpha Presents at SMTA New Delhi, Bangalore Chapter, on Flux–OSP Interaction
09/09/2025 | MacDermid Alpha Electronics SolutionsMacDermid Alpha contributes technical insights on OSP solderability at the Bangalore Chapter, SMTA reinforcing commitment to knowledge-sharing and industry collaboration.
Electra’s ElectraJet EMJ110 Inkjet Soldermask Now in Black & Blue at Sunrise Electronics
09/08/2025 | Electra Polymers LtdFollowing the successful deployment of Electra’s Green EMJ110 Inkjet Soldermask on KLA’s Orbotech Neos™ platform at Sunrise Electronics in Elk Grove Village, Illinois, production has now moved beyond green.
Absolute EMS: The Science of the Perfect Solder Joint
09/05/2025 | Absolute EMS, Inc.Absolute EMS, Inc., a six-time award-winning provider of fast turnaround, turnkey contract electronic manufacturing services (EMS), is drawing attention to the critical role of 3D Solder Paste Inspection (SPI) in ensuring the reliability of both FLEX and rigid printed circuit board assemblies (PCBAs).