The Knowledge Base: A Conference for Cleaning and Coating of Mission-critical Electronics
Defense Speak Interpreted: Is DARPA Still Around After CHIPS?
Beyond the Board: Orbital High Ground—Why Space Superiority Is Slipping Away
Arlon EMD and Doosan Electro-Materials BG to Exhibit at IPC APEX EXPO 2017
February 8, 2017 | Arlon EMDEstimated reading time: 1 minute
Arlon Electronic Materials, a specialty materials supplier based in Southern California, will be teaming up with Doosan Electro-Materials BG, at the IPC APEX EXPO 2017. Doosan will be promoting DS600 Flexible Copper Clad Laminates and DS7402, Halogen Free, High Tg FR-4 materials. Arlon will be highlighting the technological advantages of several specialty materials including the recently released, 85HP high performance polyimide system along with the reintroduction of multiple nonwoven aramid reinforced products.
Arlon’s recent distribution agreement with Doosan Electro-Materials BG will allow Arlon to provide sales and technical support of various products from Doosan. For Arlon EMD, this agreement enables expansion of product line offerings into the electronic materials industry, while enhancing Arlon’s focus on rigid-flex applications for military, avionics and space market segments.
The IPC APEX EXPO 2017 show will take place February 14th thru 16th, 2017 in San Diego, California. Arlon EMD and Doosan Electro-Materials BG will be located at booth # 3602.
About Arlon: Arlon EMD is a privately held, veteran owned, US manufacturer and distributor of specialty materials. Arlon has supplied materials for the N. American, UK and European markets for more than 25 years from their manufacturing location in Rancho Cucamonga, California.
For additional information, please visit our website.
Share on:
Suggested Items
Trump Copper Tariffs Spark Concern
07/10/2025 | I-Connect007 Editorial TeamPresident Donald Trump stated on July 8 that he plans to impose a 50% tariff on copper imports, sparking concern in a global industry whose output is critical to electric vehicles, military hardware, semiconductors, and a wide range of consumer goods. According to Yahoo Finance, copper futures climbed over 2% following tariff confirmation.
Happy’s Tech Talk #40: Factors in PTH Reliability—Hole Voids
07/09/2025 | Happy Holden -- Column: Happy’s Tech TalkWhen we consider via reliability, the major contributing factors are typically processing deviations. These can be subtle and not always visible. One particularly insightful column was by Mike Carano, “Causes of Plating Voids, Pre-electroless Copper,” where he outlined some of the possible causes of hole defects for both plated through-hole (PTH) and blind vias.
Trouble in Your Tank: Can You Drill the Perfect Hole?
07/07/2025 | Michael Carano -- Column: Trouble in Your TankIn the movie “Friday Night Lights,” the head football coach (played by Billy Bob Thornton) addresses his high school football team on a hot day in August in West Texas. He asks his players one question: “Can you be perfect?” That is an interesting question, in football and the printed circuit board fabrication world, where being perfect is somewhat elusive. When it comes to mechanical drilling and via formation, can you drill the perfect hole time after time?
The Evolution of Picosecond Laser Drilling
06/19/2025 | Marcy LaRont, PCB007 MagazineIs it hard to imagine a single laser pulse reduced not only from nanoseconds to picoseconds in its pulse duration, but even to femtoseconds? Well, buckle up because it seems we are there. In this interview, Dr. Stefan Rung, technical director of laser machines at Schmoll Maschinen GmbH, traces the technology trajectory of the laser drill from the CO2 laser to cutting-edge picosecond and hybrid laser drilling systems, highlighting the benefits and limitations of each method, and demonstrating how laser innovations are shaping the future of PCB fabrication.
Day 2: More Cutting-edge Insights at the EIPC Summer Conference
06/18/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) summer conference took place this year in Edinburgh, Scotland, June 3-4. This is the third of three articles on the conference. The other two cover Day 1’s sessions and the opening keynote speech. Below is a recap of the second day’s sessions.