The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
Indium Features Gold Alloy Solder Preforms at SPIE Defense + Commercial Sensing Expo
February 16, 2017 | Indium CorporationEstimated reading time: Less than a minute
Indium Corporation will feature its precision gold alloy solder preforms at SPIE Defense + Commercial Sensing Expo, which will be held from April 9-13 in Anaheim, California.
Depending on the alloy, gold-based solders have a melting point ranging from 280°C to 1064°C, making it compatible with subsequent reflow processes. In addition, gold-based solders are resistant to corrosion, provide superior thermal fatigue resistance, and exhibit excellent joint strength.
Indium's AuSn preforms have the highest tensile strength of any solder, ensuring high-reliability for joining and sealing. AuSn preforms are designed for high-reliability applications, such as aerospace, defense, and medical.
Semiconductor-grade preforms are designed to meet the challenges faced as RF and power semiconductor devices continue to get smaller, with power density increasing both as a consequence of the shrink and as a result of increased power ratings.
About Indium Corporation
Indium Corporation’s Pb-free and RoHS-compliant preforms are available in a variety of standard and custom-engineered designs. For more information about Indium Corporation’s gold alloy solder preforms, visit booth 121.
For more information about Indium Corporation, visit www.indium.com.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.