The Marketing Minute: Marketing With Layers
The Right Approach: Electro-Tek—A Williams Family Legacy, Part 1
It’s Only Common Sense: If You’re Not Differentiated, You’re Dead
Accurate Engineering Installs ATG A5 Flying Probe Tester
March 2, 2017 | Accurate EngineeringEstimated reading time: 1 minute
Accurate Engineering Inc. recently purchased an ATG A5 flying probe continuity tester. This machine uses eight test probes, four on either s (Softtouch or Micro needle probes).
The ATG A5’s smallest testable pitch is 4 mils. It can handle a PC board as thin as 0.05 mm and as thick as 2.5 mm with a maximum board size of 650 mm x 520 mm. This machine is also able to conduct high voltage tests as high as 500 V. To facilitate the further efficiency, the ATG A5 can handle flex and inner layers using its pneumatic tension shuttle.
“We felt this was a prudent purchase to help complete all the new work we’ve been receiving here at Accurate,” said Sam Sangani, owner of both Accurate Engineering Inc. and PNC Inc. “At PNC Inc., our focus on quality has become part of our identity and we hope to accomplish the same here. The ATG A5 seemed to be a logical step forward in that process.”
To further add to the speed of the process, the tester is capable of 50 scanmarks per minute while also using its four camera heads to optically check for defects.
About PNC Inc. and Accurate Engineering Inc.
At the end of 2016, PNC Inc.’s leadership fulfilled their desire to have a quality board house on the West Coast by purchasing Accurate Engineering Inc. in Sun Valley, CA. Their focus is on high-complexity flex and rigid-flex PC boards. Some of their customers include Northrop Grumman, NASA, JPL, Raytheon and Lockheed Martin. By joining forces with PNC Inc. the two companies have committed themselves to providing their customers with high-quality manufacturing made in the United States.
Share on:
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
Technica USA Named Exclusive U.S. Distributor for DCT Cleaning Products
10/14/2025 | Technica USATechnica USA is pleased to announce a strategic partnership with DCT USA, LLC, becoming the exclusive master distributor of DCT cleaning products in the United States, effective November 1, 2025.
It’s Only Common Sense: If You’re Not Differentiated, You’re Dead
10/13/2025 | Dan Beaulieu -- Column: It's Only Common Sense“Good enough” is not good enough in business. Not anymore. “Good enough” is a death sentence in today’s market. Too many companies hide behind their ISO certificates, ITAR registrations, and shiny badges of compliance as if those are supposed to impress customers, but certifications are table stakes. Everyone has them. If you think that’s your differentiator, you’re already in the grave; you just don’t know it.
Catching Up With Mark Wood, Microart Services
10/08/2025 | Dan Beaulieu, D.B. Management GroupMicroart Services has been in business for over 40 years, growing from a design PCB layout company to a full-service EMS company focused on serving its customer base with standard and custom solutions. I’ve heard from my rep friends, their competitors, and even my Canadian PCB friends that Microart is “one of the best EMS companies in North America.” That’s why I decided to speak with CEO Mark Wood to discover the secret to his company's success.
Standard of Excellence: Overcoming Service Failures—The Art of the Apology
10/08/2025 | Anaya Vardya -- Column: Standard of ExcellenceNo matter how refined the processes, how seasoned the team, or how sophisticated the technology, mistakes happen in business. A shipment goes out late. A part doesn’t meet spec. A miscommunication causes frustration. It’s the part of customer service that no one likes to talk about, but every company must master how to respond when things go wrong.
It’s Only Common Sense: Stop Whining About the Market—Outwork It
10/06/2025 | Dan Beaulieu -- Column: It's Only Common SenseWhenever the market hiccups or the industry cycle dips, I hear the same tired chorus: “The market is down. Customers aren’t buying. What can we do? We just have to wait it out.” Nonsense. If you think that by showing up, opening your doors, and waiting for the economy to smile kindly upon you, that success will follow, you are in the wrong business. Worse yet, you’re living in the wrong mindset. Most people don’t want to hear the truth that winners find business in down cycles. Losers blame the economy.