Scientists Harness Solar Power to Produce Clean Hydrogen From Biomass
March 14, 2017 | University of CambridgeEstimated reading time: 3 minutes
A team of scientists at the University of Cambridge has developed a way of using solar power to generate a fuel that is both sustainable and relatively cheap to produce. It’s using natural light to generate hydrogen from biomass.
One of the challenges facing modern society is what it does with its waste products. As natural resources decline in abundance, using waste for energy is becoming more pressing for both governments and business.
Biomass has been a source of heat and energy since the beginning of recorded history. The planet’s oil reserves are derived from ancient biomass which has been subjected to high pressures and temperatures over millions of years. Lignocellulose is the main component of plant biomass and up to now its conversion into hydrogen has only been achieved through a gasification process which uses high temperatures to decompose it fully.
Dr Moritz Kuehnel, from the Department of Chemistry at the University of Cambridge, joint lead author on a new research paper published in Nature Energy, says:
"Lignocellulose is nature's equivalent to armoured concrete. It consists of strong, highly crystalline cellulose fibres, that are interwoven with lignin and hemicellulose which act as a glue. This rigid structure has evolved to give plants and trees mechanical stability and protect them from degradation, and makes chemical utilisation of lignocellulose so challenging."
The new technology relies on a simple photocatalytic conversion process. Catalytic nanoparticles are added to alkaline water in which the biomass is suspended. This is then placed in front of a light in the lab which mimics solar light. The solution is ideal for absorbing this light and converting the biomass into gaseous hydrogen which can then be collected from the headspace. The hydrogen is free of fuel-cell inhibitors, such as carbon monoxide, which allows it to be used for power.
The nanoparticle is able to absorb energy from solar light and use it to undertake complex chemical reactions. In this case, it rearranges the atoms in the water and biomass to form hydrogen fuel and other organic chemicals, such as formic acid and carbonate.
Joint lead author, Dr David Wakerley, also of the Department of Chemistry, says:
“There’s a lot of chemical energy stored in raw biomass, but it’s unrefined, so you can’t expect it to work in complicated machinery, such as a car engine. Our system is able to convert the long, messy structures that make up biomass into hydrogen gas, which is much more useful. We have specifically designed a combination of catalyst and solution that allows this transformation to occur using sunlight as a source of energy. With this in place we can simply add organic matter to the system and then, provided it’s a sunny day, produce hydrogen fuel.”
The team used different types of biomass in their experiments. Pieces of wood, paper and leaves were placed in test tubes and exposed to solar light. The biomass didn’t require any processing beforehand.
The technology was developed in the Christian Doppler Laboratory for Sustainable SynGas Chemistry at the University of Cambridge. The head of the laboratory, Dr. Erwin Reisner, adds:
“Our sunlight-powered technology is exciting as it enables the production of clean hydrogen from unprocessed biomass under ambient conditions. We see it as a new and viable alternative to high temperature gasification and other renewable means of hydrogen production.
Future development can be envisioned at any scale, from small scale devices for off-grid applications to industrial-scale plants, and we are currently exploring a range of potential commercial options."
With the help of Cambridge Enterprise, the commercialisation arm of the University, a UK patent application has been filed and talks are under way with a potential commercial partner.
Suggested Items
Jabil Announces Leadership Transitions
05/20/2024 | JabilJabil Inc. announced a number of senior leadership transitions that are effective immediately. Michael Dastoor, who has been serving as Chief Financial Officer and Interim CEO, has been appointed Chief Executive Officer.
Zentech First to Adopt IPC Apprenticeship National Program Standards
05/20/2024 | Cory Blaylock, IPCIPC achieved a landmark in 2023 by creating an apprenticeship program approved by the U.S. Department of Labor. With such a registered framework in place, industry can work through IPC to secure local, state, and federal dollars for workforce development in a way they’ve never been able to do before. Zentech Manufacturing, headquartered in Baltimore, Maryland, with production facilities in Bloomington, Illinois, and Richardson, Texas, is the first employer partner to adopt IPC’s national program. Click here to read their story.
Curtiss-Wright Awarded Contracts Valued in Excess of $130M to Support Critical U.S. Naval Defense Platforms
05/16/2024 | BUSINESS WIRECurtiss-Wright Corporation announced it has been awarded contracts valued in excess of $130 million to provide propulsion valves, pumps and advanced instrumentation and control systems for the U.S. Navy’s Virginia-class nuclear powered attack submarine, Columbia-class submarine and Ford-class aircraft carrier programs.
Flex Announces Upcoming Changes to Its Board of Directors
05/07/2024 | FlexFlex announced that consistent with its succession plan, Michael D. Capellas, non-executive Chair of the Board of Directors of Flex, has informed the Board of his decision not to stand for re-election to the Board at the company's 2024 Annual General Meeting of shareholders to be held on August 8, 2024. Mr. Capellas has served on the company's board for 10 years, including as Chair since 2017, during which time he played a key role in building Flex's reputation as a trusted global technology, supply chain and manufacturing solutions partner and driving the company's success.
Europlacer Presents New Range of iineo SMT Placement Machines.
05/01/2024 | EuroplacerFor more than 15 years, the Europlacer iineo placement machines have made their mark on the SMT industry with unique features and unrivalled flexibility. Today, Europlacer announces the launch of the second generation iineo.