Dan’s Biz Bookshelf: ‘Dream First, Details Later
Happy’s Tech Talk #40: Factors in PTH Reliability—Hole Voids
Facing the Future: Time for Real Talk, Early and Often, Between Design and Fabrication
Material Choices for High-Speed Flexible Circuits
April 27, 2017 | G. Sidney Cox, COX CONSULTINGEstimated reading time: 1 minute
Abstract
High-speed rigid boards have existed for many years, with fluoropolymers being the most common dielectric used. More recently, flexible circuit materials have been developed, and these new products use a variety of polymer (including fluoropolymers) and composite film approaches to allow high-speed flex circuits. This article will provide guidelines on how to compare the different options. The electrical benefits of the different polymers and constructions will be reviewed as well as the physical and flexible properties of different constructions. As with any new materials, the ease of processing is an important consideration, especially since some of these new products use thermoplastic adhesives or require high-temperature lamination of bondplies and coverlays.
Introduction
High-speed rigid boards have existed for many years and continue to improve. Initially, most high-speed rigid boards used fluoropolymer dielectrics (fluorine-containing polymers like Teflon®). Now many new dielectrics have been developed for high-speed rigid boards, which has broadened both the material supplier base and the number of fabricators that can make high-speed rigid boards.
Materials for high-speed flexible circuits are a much more recent development. This article will review the key material choices for making high-speed flexible circuits while also explaining why older flex materials were not a good choice for today’s high-speed circuits.
When talking about high-speed circuits, we are really talking about controlled impedance applications. This could be either microstrip or stripline designs. This paper will discuss flexible clads, as well as bondplies and coverlays. For controlled impedance circuits, the electrical properties of the clad and bondplies are critical for striplines. The electrical properties of the clad and coverlay are critical for microstrips.
To read the full version of this article which appeared in the April 2017 issue of The PCB Magazine, click here.
Share on:
Suggested Items
Symposium Review: Qnity, DuPont, and Insulectro Forge Ahead with Advanced Materials
07/02/2025 | Barb Hockaday, I-Connect007In a dynamic and informative Innovation Symposium hosted live and on Zoom on June 25, 2025, representatives from Qnity (formerly DuPont Electronics), DuPont, and Insulectro discussed the evolving landscape of flexible circuit materials. From strategic corporate changes to cutting-edge polymer films, the session offered deep insight into design challenges, reliability, and next-gen solutions shaping the electronics industry.
Indium Corporation Expert to Present on Automotive and Industrial Solder Bonding Solutions at Global Electronics Association Workshop
06/26/2025 | IndiumIndium Corporation Principal Engineer, Advanced Materials, Andy Mackie, Ph.D., MSc, will deliver a technical presentation on innovative solder bonding solutions for automotive and industrial applications at the Global Electronics A
Gorilla Circuits Elevates PCB Precision with Schmoll’s Optiflex II Alignment System
06/23/2025 | Schmoll MaschinenGorilla Circuits, a leading PCB manufacturer based in Silicon Valley, has enhanced its production capabilities with the addition of Schmoll Maschinen’s Optiflex II Post-Etch Punch system—bringing a new level of precision to multilayer board fabrication.
Day 1: Cutting Edge Insights at the EIPC Summer Conference
06/17/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) Summer Conference took place this year in Edinburgh, Scotland, June 3-4. This is the second of three articles on the conference. The other two cover the keynote speeches and Day 2 of the technical conference. Below is a recap of the first day’s sessions.
American Made Advocacy: Supporting the Entire PCB Ecosystem—Materials to OEMs
06/17/2025 | Shane Whiteside -- Column: American Made AdvocacyWith the addition of RTX to PCBAA’s membership roster, we now represent the interests of companies in the entire PCB ecosystem. From material providers to OEMs, the insights of our collective members help us educate, advocate, and support legislation and policy favorable to America’s microelectronics manufacturers. The industry veterans who lead these companies provide valuable perspective, and their accumulated wisdom makes us an even stronger association.