The Knowledge Base: My 2025 Industry Wish List
Global Sourcing Spotlight: The Surprising World of Offshore B2B Industrial Values
Nolan’s Notes: Emerging Trends in 2025
Indium to Showcase Indium8.9HF Solder Paste at MEMS and Sensors Technology Symposium 2017
May 2, 2017 | Indium CorporationEstimated reading time: Less than a minute
Indium Corporation will feature its MEMS microphone lid-attach Indium8.9HF Solder Paste at MEPTEC’s 15th Annual MEMS and Sensors Technology Symposium on June 6, in San Jose, California.
Indium8.9HF is a no-clean, halogen-free (no intentionally added, halogen-free flux) solder paste that enables dispensing of fine lines and shapes down to a width of less than 150 microns. Indium8.9HF provides reliable and consistent dispensing of a standard racetrack deposit using automated time/pressure or auger-based dispensing equipment.
Indium8.9HF eliminates failure modes, such as blow-hole, reduces solder creep, and increases solder joint shear strength. The flux is suitable for use with all standard Pb-free higher-melting alloys, such as those based on SnSb and SnAg.
For more information about Indium Corporation, click here.
Share on:
Suggested Items
Technica Installs CBT/MLI Direct Imaging System at Summit Interconnect Santa Clara
01/14/2025 | Technica USATechnica has recently installed the 6th CBT/MLI Direct Imaging (DI) system at Summit Interconnect's Santa Clara operation, a testament to Summit's ongoing commitment to cutting-edge technology and operational excellence.
Indium to Showcase Power Electronics Products at NEPCON Japan
01/14/2025 | Indium CorporationAs one of the leading materials providers in the electronics assembly industry, Indium Corporation® is proud to feature its lineup of high-reliability products for power electronics at NEPCON Japan, taking place January 22-24, in Tokyo, Japan.
SolderKing to Highlight Innovations in Soldering and Manufacturing Efficiency at Southern Manufacturing & Electronics 2025
01/08/2025 | SolderKing Assembly Materials Ltd,SolderKing, a leading UK manufacturer of advanced soldering materials and consumables, will be exhibiting at the Southern Manufacturing and Electronics Show from 4-6 February 2025 at the Farnborough International Exhibition Centre, Stand J90.
Altus Highlights Heller Industries Advances in Void Reduction Under 1%
01/06/2025 | Altus GroupAltus Group, a leading distributor of capital equipment in the UK and Ireland, emphasises the importance of reducing voids in reflow soldering to improve manufacturing efficiency and product reliability
IPC Announces UK Regional Qualification for Hand Soldering Competition
01/02/2025 | IPCIPC invites skilled soldering experts to participate in the UK Regional Qualification for the IPC Hand Soldering Competition (HSC) on February 4-6, 2025, at the Farnborough International Exhibition Centre.