Dan’s Biz Bookshelf: ‘Elevate: Push Beyond Your Limits'
The Marketing Minute: The First Step to More Sales—Marketing
It’s Only Common Sense: Customer Service Is Sales in Disguise
Bruce Mahler Discusses Ohmega’s Resistive Material Technology
May 7, 2017 | Andy Shaughnessy, PCBDesign007Estimated reading time: 2 minutes
Bruce Mahler, vice president of Ohmega Technologies, sat down for an interview with me at DesignCon 2017. He discussed the company’s latest embedded resistive materials, as well as some of the drivers and challenges in that segment of the materials industry.
Andy Shaughnessy: Bruce, why don't you start off by giving us a brief background on Ohmega Technologies.
Bruce Mahler: Ohmega Technologies manufactures a thin-film resistive material, which is a nickel phosphorous alloy plated onto copper foil. That resistive foil, called OhmegaPly RCM, is laminated to a dielectric like regular copper foil and is then subtractively processed using standard PCB print and etch, to create resistive elements that are used either embedded within a multilayer printed circuit board or on the surface of a printed circuit board. We've been doing this for more than 40 years now, and we’re surprised with the variety of applications that use our technology. Every year it seems that there are new applications, new ways to use the resistive film. So, it's like a constant renewal of the technology in new opportunities, of new growth of the use of embedded resistors within printed circuit boards.
Shaughnessy: What are the primary markets that these boards wind up in?
Mahler: Good question. One of the primary markets is A&D (aerospace & defense) which we have been supplying our products to for decades. It’s mostly used in radar systems, control circuits, and in critical operating systems where absolute performance and reliability are essential. The resistive material cannot be affected by temperature extremes, high G-force, vibration, magnetic or cosmic radiation and those kinds of things.
The other big market is sensor technologies. We supply our product to the MEMS microphone manufacturers. If you have a cellphone, you probably have OhmegaPly within that cell phone. We're used in the MEMS microphone of cell phones as part of an RC filter to improve the sound fidelity of the microphones; we've been doing that for many years. There’s also a growing area of applications and use in sensor technologies: not just MEMS microphones but other MEMS devices and technologies.
The third area of use where we see growing opportunities are in heater designs. Heater elements are used for things like semi-active laser activation of smart munitions or embedded resistors as heater elements in a printed circuit board to maintain surface components at optimum temperatures for optimum operation, whether that's in deep-space applications or even down to earth in medical diagnostic type applications. OhmegaPly has also been used as an internal heater in burn-in boards to allow for IC burn-in without the need of a temperature chamber.
To read this entire article, which appeared in the April 2017 issue of The PCB Design Magazine, click here.
Share on:
Suggested Items
Elephantech Launches World’s Smallest-Class Copper Nanofiller
07/17/2025 | ElephantechJapanese deep-tech startup Elephantech has launched its cutting-edge 15 nm class copper nanofiller – the smallest class available globally. This breakthrough makes Elephantech one of the first companies in the world to provide such advanced material for commercial use.
Copper Price Surge Raises Alarms for Electronics
07/15/2025 | Global Electronics Association Advocacy and Government Relations TeamThe copper market is experiencing major turbulence in the wake of U.S. President Donald Trump’s announcement of a 50% tariff on imported copper effective Aug. 1. Recent news reports, including from the New York Times, sent U.S. copper futures soaring to record highs, climbing nearly 13% in a single day as manufacturers braced for supply shocks and surging costs.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
07/11/2025 | Andy Shaughnessy, Design007 MagazineThis week, we have quite a variety of news items and articles for you. News continues to stream out of Washington, D.C., with tariffs rearing their controversial head again. Because these tariffs are targeted at overseas copper manufacturers, this news has a direct effect on our industry.I-Connect007 Editor’s Choice: Five Must-Reads for the Week
Digital Twin Concept in Copper Electroplating Process Performance
07/11/2025 | Aga Franczak, Robrecht Belis, Elsyca N.V.PCB manufacturing involves transforming a design into a physical board while meeting specific requirements. Understanding these design specifications is crucial, as they directly impact the PCB's fabrication process, performance, and yield rate. One key design specification is copper thieving—the addition of “dummy” pads across the surface that are plated along with the features designed on the outer layers. The purpose of the process is to provide a uniform distribution of copper across the outer layers to make the plating current density and plating in the holes more uniform.
Trump Copper Tariffs Spark Concern
07/10/2025 | I-Connect007 Editorial TeamPresident Donald Trump stated on July 8 that he plans to impose a 50% tariff on copper imports, sparking concern in a global industry whose output is critical to electric vehicles, military hardware, semiconductors, and a wide range of consumer goods. According to Yahoo Finance, copper futures climbed over 2% following tariff confirmation.