-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Hole Truth: Via Integrity in an HDI World
From the drilled hole to registration across multiple sequential lamination cycles, to the quality of your copper plating, via reliability in an HDI world is becoming an ever-greater challenge. This month we look at “The Hole Truth,” from creating the “perfect” via to how you can assure via quality and reliability, the first time, every time.
In Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
- Articles
- Columns
- Links
- Media kit
||| MENU - pcb007 Magazine
Orange Co. Designers Council Meeting Focuses on Embedded Passives
August 9, 2017 | Judy Warner, AltiumEstimated reading time: 1 minute

On July 19, the Orange County Chapter of the IPC Designer’s Council hosted a lunch-and-learn meeting in Tustin to discuss the benefits of embedded passives. Approximately 40 people were in attendance, which was lighter turnout than usual, most likely because of summer vacations. But the crowd was an enthusiastic one, as usual.
The first speaker was Bruce Mahler, vice president of Ohmega Technologies. Mahler was articulate in demonstrating the clear benefits of embedded passives for PCB designers: Increased routing space, improved reliability, improved electrical performance in some designs, and reduced cost. Although not a new technology, the use of embedded resistors has increased particularly in the past 10 years.
Mahler pointed out that nearly every smartphone on the planet now contains embedded passives due to the uber-tight footprint that is crammed with functionality. High-frequency, RF, MEMS sensors and heater elements are increasingly dependent upon resistive materials like OhmegaPly. Mahler also demonstrated the step-by-step process of board fabrication for resistive materials, and he pointed out how this differs from traditional board fab. (To see Mahler’s presentation, click here.)
The second speaker was Jin Hyun-Hwang, an applications development engineer from Dupont. Hyun-Hwang discussed buried capacitance (a pair of power/ground layer pairs) designed for power distribution design options. Hwang discussed 1 mil and 0.5 mil dielectric laminates and the benefits of each. In this case, the number of decoupling caps can be reduced significantly, which frees up design real estate. Other benefits include reducing noise and increasing higher reliability. Process challenges for fabricators were also discussed. (To see Hyun-Hwang’s presentation, click here.)
Orange County Chapter President Scott McCurdy has built and maintained the largest chapter of the IPC Designers Council currently in operation. At this particular gathering, he was celebrating his 59th meeting. The next chapter meeting will be held at Harvard Park on September 26. The subject and speaker will be announced soon on the chapter’s website.
The Orange County chapter will be hosting a full-day Advanced PCB Design Conference in Irvine, California on November 8, 2017. Industry icons Eric Bogatin and Happy Holden will be featured along with several other design experts. Tabletop sponsors are being sought now.
Contact Scott McCurdy by clicking here, or Terri Kleekamp by clicking here, for more information about upcoming Orange County Chapter events.
Suggested Items
ESD Alliance Reports Electronic System Design Industry Posts $5.1 Billion in Revenue in Q1 2025
07/16/2025 | SEMIElectronic System Design (ESD) industry revenue increased 12.8% to $5,098.3 million in the first quarter of 2025 from the $4,521.6 million registered in the first quarter of 2024, the ESD Alliance, a SEMI Technology Community, announced in its latest Electronic Design Market Data (EDMD) report.
Beyond Design: Refining Design Constraints
07/17/2025 | Barry Olney -- Column: Beyond DesignBefore starting any project, it is crucial to develop a thorough plan that encompasses all essential requirements. This ensures that the final product not only aligns with the design concept but is also manufacturable, reliable, and meets performance expectations. High-speed PCB design requires us to not only push technological boundaries but also consider various factors related to higher frequencies, faster transition times, and increased bandwidths during the design process.
Prague PEDC: Call for Abstracts Deadline July 31
07/16/2025 | Pan-European Electronics Design Conference (PEDC)The second Pan-European Electronics Design Conference (PEDC) will take place Jan. 21-22, 2026, in Prague, Czech Republic. The call for abstracts deadline is July 31. Organized jointly by the German Electronics Design and Manufacturing Association (FED) and the Global Electronics Association PEDC serves as a European platform for knowledge exchange, networking, and innovation in electronics design and development.
The Pulse: Design Constraints for the Next Generation
07/16/2025 | Martyn Gaudion -- Column: The PulseIn Europe, where engineering careers were once seen as unpopular and lacking street credibility, we have been witnessing a turnaround in the past few years. The industry is now welcoming a new cohort of designers and engineers as people are showing a newfound interest in the profession.
Flexible Circuit Technologies Welcomes Regional Business Development Manager Derek Rossberg
07/15/2025 | Flexible Circuit TechnologiesFlexible Circuit Technologies a Minnesota-based flexible circuit and advanced electronics contract manufacturer, welcomes Derek Rossberg as Regional Business Development Manager.