Dan’s Biz Bookshelf: ‘Believe in Better'
The Big Picture: Our Big ‘Why’ in the Age of AI
The Chemical Connection: Through-glass Vias in Glass Substrates
Nine Dot Connects Webinar: What Qualifies a Circuit as High Speed?
August 22, 2017 | Nine Dot ConnectsEstimated reading time: Less than a minute
Technologists at Nine Dot Connects have been asked the following question many times: "What's the frequency in which a design is considered to be high speed?" Would it surprise you to know that a 10 MHz design which could be wire wrapped or placed on a protoboard could constitute high speed? The fact is, frequency is only a part of the story.
The bigger question is, "What factors qualify the circuit as high speed?" Issues such as EMI, crosstalk, receiver noise floor, and signal propagation all come into play. It is not just a matter of avoiding or mitigating these issues; it's about optimizing the communication path.
This August 30 webinar will focus on exactly what qualifies a circuit as high speed. Sean Kelly, who has provided several introductory webinars on the topic of high speed in the recent past, will be presenting.
Date/Time
Wednesday, August 30, 2017 at 11 am (PDT) / 2 pm (EDT)
To Register
For more information, or to register, click here. Attendees can also enjoy previously recorded webinars saved on the Nine Dot Connects website.
Share on:
Suggested Items
DownStream Acquisition Fits Siemens’ ‘Left-Shift’ Model
06/26/2025 | Andy Shaughnessy, I-Connect007I recently spoke to DownStream Technologies founder Joe Clark about the company’s acquisition by Siemens. We were later joined by A.J. Incorvaia, Siemens’ senior VP of electronic board systems. Joe discussed how he, Rick Almeida, and Ken Tepper launched the company in the months after 9/11 and how the acquisition came about. A.J. provides some background on the acquisition and explains why the companies’ tools are complementary.
Elementary Mr. Watson: Retro Routers vs. Modern Boards—The Silent Struggle on Your Screen
06/26/2025 | John Watson -- Column: Elementary, Mr. WatsonThere's a story about a young woman preparing a holiday ham. Before putting it in the pan, she cuts off the ends. When asked why, she shrugs and says, "That's how my mom always did it." She asks her mother, who gives the same answer. Eventually, the question reaches Grandma, who laughs and says, "Oh, I only cut the ends off because my pan was too small." This story is a powerful analogy for how many PCB designers approach routing today.
Siemens Turbocharges Semiconductor and PCB Design Portfolio with Generative and Agentic AI
06/24/2025 | SiemensAt the 2025 Design Automation Conference, Siemens Digital Industries Software today unveiled its AI-enhanced toolset for the EDA design flow.
Cadence AI Autorouter May Transform the Landscape
06/19/2025 | Andy Shaughnessy, Design007 MagazinePatrick Davis, product management director with Cadence Design Systems, discusses advancements in autorouting technology, including AI. He emphasizes a holistic approach that enhances placement and power distribution before routing. He points out that younger engineers seem more likely to embrace autorouting, while the veteran designers are still wary of giving up too much control. Will AI help autorouters finally gain industry-wide acceptance?
Beyond Design: The Metamorphosis of the PCB Router
06/18/2025 | Barry Olney -- Column: Beyond DesignThe traditional PCB design process is often time-consuming and labor-intensive. Routing a complex PCB layout can consume up to 30% of a designer’s time, and addressing this issue is not straightforward. We have all encountered this scenario: You spend hours setting the constraints and finally hit the Go button, only to be surprised by the lack of visual appeal and the obvious flaws in the result.