-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueAdditive Manufacturing
In this month’s issue, we explore additive manufacturing technology for the PCB fabricator: where it stands today, the true benefits, and where it seems to be headed.
The Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Ventec Shares Their Insights on the Laminate Market, Part I
September 12, 2017 | Barry Matties, I-Connect007Estimated reading time: 7 minutes
I-Connect007’s Barry Matties sat down with the COO of Ventec USA/Europe, Mark Goodwin, to discuss the laminate market as a whole, the market segments behind that growth, and how Ventec has positioned itself in the thermal management space.
Matties: Mark, can you begin by giving our readers a little of your background in the industry—not just where you have worked, but the tasks you’ve done?
Goodwin: I started in this business for a company called Photocircuits. Not the big American Photocircuits, but a little photoplotting bureau in Barton-le-Clay, in Bedfordshire, England. I worked there from ‘83 to ‘90, and I started off with red and blue reductions, red and blue separations and taped artworks on a big Littlejohn wooden camera. Then I ended up in a sales role, but that was at a point when everybody started buying laser plotters and the business was clearly going to have to change and decline. I kind of realized that and when I saw Isola’s advert in the Luton news I remember thinking, “Well, every circuit board needs laminate and lots of it. It only needs one set of artwork and they use lots of laminate. It's got to be a better bet.” They offered me a job with a mobile phone and a company car, and that always swings it, doesn't it? In 1990, I started with Isola.
Matties: Was sales something that you were interested in?
Goodwin: I was already selling for Photocircuits, technical selling. I'm a great believer in people that look back and discover they’ve had a career. I know very few people that have written it down on a sheet of paper and said, I'm going to do this, this, and this and then have actually gone and done it.
I just see opportunities and take them—or not—but mostly the good ones I've taken. And you know, I got a great education in the laminate business and owe a lot to Manfred Cygon, a really good guy. I spent the first two or three months at Isola working in the factory in Cumbernauld, and then working in Cygon’s labs in Düren, Germany and that gave me a very good grounding on materials. I always said, and I really believe this, that I'm not a technical guy, not at the level of detail you really need to be a technical guy, but I do understand all of the concepts that go on in this business, and I really attribute that to Manfred Cygon, who was a fantastically good guy.
Matties: How long did you work at Isola?
Goodwin: I was there until 2004 and then disappeared out of the business for 18 months or so in a non-compete and joined Ventec at beginning of 2007. The rest is Ventec history. We started with a 1985-vintage Schmid saw and a Rosenthal slitter from when Pontius was a Pilate.
Matties: It's quite a climb from there to here.
Goodwin: I know. We've got state-of-the-art equipment now. Some people say we should have big Schelling saws, but I disagree for the UK market. The UK market is low-volume, high-mix, so why do you want an automated, big piece of kit? We've got big automated saws in the German facility where we have the kind of volumes that dictate that. It’s far better off to have two small manual saws for the UK market, which is high-mix, low-volume, and service-driven. It gives you two things: the first is redundancy, but because we run two saws eight hours a day we gain bandwidth and If we have one piece of kit go down, we can run one saw 16 hours a day and still keep all our customers supplied.
Matties: So capacity and redundancy.Page 1 of 2
Suggested Items
Q1 Smartphone Production Increases Due to Low Base Last Year, Expected to Decline 5–10% in Q2
06/14/2024 | TrendForceTrendForce reports that suppliers significantly reduced production targets in the first quarter of last year to address severe inventory accumulation in channels.
Top 10 Global Foundries at 4.3% QoQ Drop in 1Q24 Revenue as SMIC Climbed to 3rd Spot
06/12/2024 | TrendForceAs indicated by the survey of global market intelligence firm TrendForce, 1Q24 marked the entry of a traditional off-season for the consumer end, where the sporadic appearance of urgent orders within the supply chain were mostly replenishment of inventory among individual clients, and exhibited sluggishness in momentum on the whole.
Werner H. J. Wagner Appointed as General Manager of Indium Corporation Advanced Materials GmbH
06/11/2024 | Indium CorporationIndium Corporation, a leading innovator in industrial material solutions, is thrilled to announce the appointment of Werner H. J. Wagner as its new General Manager.
A/NZ Software Spending Slowed in 2023, Artificial Intelligence Grew 62% YoY
06/10/2024 | IDCAccording to the International Data Corporation (IDC) Worldwide Semiannual Software Tracker (2H23), annual software spending across A/NZ grew 17.3% year-over-year (YoY) in 2023, reaching US$20.9 billion in constant currency.
Kunkune Partners with Leading Chinese YIHUA Soldering Equipment Company as an Exclusive Distributor
06/07/2024 | Globe NewswireKunkune Ltd, a prominent name in the UK’s industrial equipment distribution sector, proudly announces its exclusive partnership with YIHUA Soldering Equipment Company, a renowned manufacturer based in China.