Learning With Leo: UHDI—The Next Leap in PCB Manufacturing
Nolan’s Notes: Is Mexico the Pulse of Electronics in the Americas?
Standard of Excellence: Speed vs. Quality in Customer Service
Electrolube Unveils New 2K Coating Sprayable Kit
September 13, 2017 | ElectrolubeEstimated reading time: 2 minutes
Hot on the heels of the launch of revolutionary two-part Conformal Coating range (2K series), Electrolube are unveiling a brand new kit to mix, dispense and spray 2K300 Conformal Coating. The new kit offers some key advantages for customer trials and spray-testing requirements as it facilitates full testing and evaluation of the 2K300 series without taking existing dispensing equipment out of production.
2K300 is a two-part system, offering high flexibility and low stress across an operating temperature range of -40°C to +130°C. The coating is hydrophobic and highly resistant to condensation, salt mist and chemicals and is fully IPC-CC-830 compliant.
Throughout the development of the entire 2K range, Electrolube has worked closely with selective coating machine manufacturers to ensure that formulations are optimised for application using commercially available dispensers. The new 2K300 Kit from Electrolube takes this one step further enabling easy testing and small production volumes to be coated without the necessity for dispensing equipment.
Head of Electrolube's Conformal Coatings Division, Phil Kinner, comments: “Electrolube can offer a Conformal Coating for virtually every type of application and this easily assembled kit will allow small production trials of our 2K300 series without a specialist dispenser. The kit comprises a resin kit, dilution fluid and a ready assembled aerosol for dispensing. It is designed as a one-time use kit.”
Electrolube Managing Director, Ron Jakeman, comments: “Electrolube is fast becoming the go-to resource for specialist technical solutions that solve customers’ manufacturing problems and help them bring high-quality products to market faster. This new kit will not only allow customers to trial our 2K300 solution, but is also ideally placed to cope with small production volumes.”
About Electrolube
Electrolube, a division of H.K. Wentworth Limited, is a leading manufacturer of specialist chemicals for electronics, automotive and industrial manufacturing. Core product groups include conformal coatings, contact lubricants, thermal management materials, cleaning solutions, encapsulation resins and maintenance and service aids.
The extensive range of electro-chemicals at Electrolube enables the company to offer a ‘complete solution’ to leading manufacturers of electronic, industrial and domestic devices, at all levels of the production process. Through collaboration and research, the company is continually developing new and environmentally friendly products for customers around the world and their commitment to developing ‘greener’ products has been endorsed by the ISO 14001 standard for the highly efficient Environmental Management System in place at the company.
Electrolube is represented in over 55 countries with an established network of subsidiaries and distributors. By offering genuine security of scale and a reliable supply chain, the company is able to deliver a truly tailored service.
Share on:
Testimonial
"In a year when every marketing dollar mattered, I chose to keep I-Connect007 in our 2025 plan. Their commitment to high-quality, insightful content aligns with Koh Young’s values and helps readers navigate a changing industry. "
Brent Fischthal - Koh YoungSuggested Items
EIPC Technical Snapshot: Sustainability in Electronics Manufacturing
11/06/2025 | Pete Starkey, I-Connect007EIPC selected the highly topical issue of sustainability in electronics manufacturing for the 24th Technical Snapshot webinar on Oct. 29, with guest speakers Satoshi Konagai of Elephantech and Liisa Hakola of the VTT Technical Research Centre of Finland. The program was moderated by Kirsten Smit-Westenberg, executive director of EIPC, who also introduced each speaker.
Target Condition: Distribution of Power—Denounce the Ounce
11/05/2025 | Kelly Dack -- Column: Target ConditionHave you ever wondered why the PCB design segment uses ounces to describe copper thickness? There’s a story behind all of this—a story that’s old, dusty, and more than a little absurd. (Note that I didn’t add “Like many of us.”) Legend has it that back in the days of copper tinkers and roofing tradesmen, the standard was set when a craftsman hammered out a sheet of copper until it weighed one ounce, when its area conveniently matched the square of the king’s foot.
Life Is a Highway: A Family of 8 Turned the Entire U.S. Into a Learning and Working Environment
11/04/2025 | Steven Bowles, Lockheed MartinIt’s 6:45 a.m. in a modern A-frame cabin tucked into the misty edges of the Cascade Range in Arlington, Washington. I’ve just made a quick Nespresso, checked my calendar of virtual meetings, and verified the Airbnb’s Wi-Fi speed is holding steady. In the next room, my wife Lynsey corrals our six kids into breakfast while planning a day trip to Seattle’s Children’s Museum. By 7:30, I’m camera-ready in a makeshift office nook, leading a discussion on HDI PCB design for an IPC standards committee. After a busy day, our Bowles crew, ranging in age from 1 to 10 years old, is hands-on with activities and exhibits in the museum.
TTM Technologies Receives Two Awards from the Global Electronics Association at the 2025 IPC CEMAC Conference
11/03/2025 | Globe NewswireTTM Technologies, Inc. announced that two of its team members received prestigious Asia Steering Committee Outstanding Service Awards from the Global Electronics Association (formerly named IPC connecting global electronics industry) at the 2025 IPC CEMAC Electronics Manufacturing Annual Conference in Shanghai.
TTCI Brings Hands-On Test Engineering and IPC Training Expertise to PCB Carolina 2025
10/31/2025 | The Test Connection Inc.The Test Connection Inc. (TTCI), a trusted provider of electronic test and manufacturing solutions, and The Training Connection LLC (TTC-LLC) will exhibit at PCB Carolina on Wednesday, November 12, 2025, at the McKimmon Center at NC State University in Raleigh, North Carolina. Attendees can visit Table 4 to say hello to Bert Horner and Bill Graver, and learn more about their test engineering services and technical training programs.