Dan’s Biz Bookshelf: ‘Believe in Better'
The Big Picture: Our Big ‘Why’ in the Age of AI
The Chemical Connection: Through-glass Vias in Glass Substrates
PCB Prototype Sales Trends Often Diverge from PCB Market Trends
October 18, 2017 | IPCEstimated reading time: 1 minute
A new report published this week by IPC, Trends in the North American Market for PCB Prototypes, reveals cycles in demand for PCB prototypes that often differ from demand trends in regular or volume-production PCB sales. Despite high volatility in prototype sales from month to month, the IPC data show clear cycles in prototype sales growth, year over year. Rigid PCB and flexible circuit prototype sales do not always reflect growth in the rigid PCB and flexible circuit markets overall.
Since 2014, rigid PCB prototype growth peaked in 2015, when overall rigid PCB sales growth was flat. In the first half of 2017, year-on-year sales growth for rigid PCBs and rigid PCB prototypes were both in negative territory, but the downturn for prototypes was more severe. In contrast, flexible circuit prototype sales took a nosedive in 2015 when overall flex sales were up. Flex prototype sales rebounded sharply in the first half of 2017 while regular-production flex sales were falling below last year’s levels.
Different drivers are the likely explanation for the different patterns of growth in sales of prototypes versus regular-production PCBs. New product development is a major driver of prototype work, while regular-production PCB sales tend to be more cyclical, reflecting economic conditions and end-user demand.
The study is based on data from IPC’s North American PCB Statistical Program covering 2014 through mid-2017. Data on prototype sales percentages by month compared to regular-production PCB sales, and estimates of North American prototype market sizes, are reported for all PCBs as well as for rigid PCBs and flexible circuits separately. The 29-page report, priced at $250 for IPC members and $500 for nonmembers, is available for immediate download in IPC’s online store.
Share on:
Suggested Items
Magnalytix and Foresite to Host Technical Webinar on SIR Testing and Functional Reliability
06/26/2025 | MAGNALYTIXMagnalytix, in collaboration with Foresite Inc., is pleased to announce an upcoming one-hour Webinar Workshop titled “Comparing SIR IPC B-52 to Umpire 41 Functional & SIR Test Method.” This session will be held on July 24, 2025, and is open to professionals in electronics manufacturing, reliability engineering, and process development seeking insights into new testing standards for climatic reliability.
IPC Rebrands as Global Electronics Association: Interview With Dr. John W. Mitchell
06/22/2025 | Marcy LaRont, I-Connect007Today, following a major announcement, IPC is embracing the rapid advancement of technology with a bold decision to change its name to the Global Electronics Association. This name more accurately reflects the full breadth of its work and the modern realities of electronics manufacturing. In this exclusive interview, Global Electronics Association President and CEO Dr. John W. Mitchell shares the story behind the rebrand: Why now, what it means for the industry, and how it aligns with the organization’s mission.
Global Electronics Association Debuts; New Name Elevates IPC’s 70-Year Legacy as Voice of $6 Trillion Electronics Industry
06/25/2025 | Global Electronics AssociationToday begins a new chapter for IPC as it officially becomes the Global Electronics Association, reflecting its role as the voice of the electronics industry. Guided by the vision of “Better electronics for a better world,” the Global Electronics Association (electronics.org) is dedicated to enhancing supply chain resilience and promoting accelerated growth through engagement with more than 3,000 member companies, thousands of partners, and dozens of governments across the globe.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
06/20/2025 | Andy Shaughnessy, I-Connect007It’s been a busy week in this industry, and we have news and articles from the PCB design, fabrication and assembly communities. Some of this news is out of this world. We may be losing the high ground—the really high ground. Columnist Jesse Vaughan explains how the U.S. seems to be falling behind in space, and how this could affect our ability to defend ourselves in the future. We have an update on the U.S.-China tariff talks, which seem to be moving forward, though sometimes at a snail’s pace.
New IPC VP Joe Schneider Building Stronger Focus on U.S., Canada
06/19/2025 | Marcy LaRont, I-Connect007IPC has hired Joe Schneider as a vice president to strengthen its regional focus and address the specific needs in the U.S. and Canada. Joe brings a rich background in OEM and contract manufacturing, including with industry giants like Siemens and Abbott Laboratories. In this interview, he shares his vision for the region, which emphasizes workforce development and supply chain challenges.