American Made Advocacy: Supporting the Entire PCB Ecosystem—Materials to OEMs
Marcy's Musings: The Hole Truth—Via Integrity in an HDI World
It’s Only Common Sense: Selling Without Selling
Matrix USA Introduces New Electrostatic Panel Cleaner
November 6, 2017 | Matrix USA Inc.Estimated reading time: Less than a minute
Matrix USA has launched a new electrostatic panel cleaner. The new system can be used in several PCB processes to remove loose surface debris using “no-touch” electrostatic neutralizers and high-pressure air knives. Most importantly minimal maintenance and no consumables will be required.
“Cleanliness is playing a more significant role in the PCB manufacturing success. Due to the continuing miniaturization of circuit features, it is now essential that dust, dirt and human touch be eliminated from the process. Many uses in the PCB shop will include film lamination, direct imaging, sm application, legend application, and layup panels, including copper, prepregs, and CCL laminates where applicable,” says Fred Long, business development with Matrix.
For more information about the products, click here.
About Matrix USA Inc.
Committed to the motto, “Quality Products, Dependable People”, Matrix was established in 1977 with the objective of providing quality raw materials to the North American printed circuit board industry. Matrix has four rapid-response warehouses located throughout the US and Canada that fulfill high quality, fast delivery, and custom orders daily. For further information, click here.
Share on:
Suggested Items
Day 1: Cutting Edge Insights at the EIPC Summer Conference
06/17/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) Summer Conference took place this year in Edinburgh, Scotland, June 3-4. This is the second of three articles on the conference. The other two cover the keynote speeches and Day 2 of the technical conference. Below is a recap of the first day’s sessions.
Preventing Surface Prep Defects and Ensuring Reliability
06/10/2025 | Marcy LaRont, PCB007 MagazineIn printed circuit board (PCB) fabrication, surface preparation is a critical process that ensures strong adhesion, reliable plating, and long-term product performance. Without proper surface treatment, manufacturers may encounter defects such as delamination, poor solder mask adhesion, and plating failures. This article examines key surface preparation techniques, common defects resulting from improper processes, and real-world case studies that illustrate best practices.
RF PCB Design Tips and Tricks
05/08/2025 | Cherie Litson, EPTAC MIT CID/CID+There are many great books, videos, and information online about designing PCBs for RF circuits. A few of my favorite RF sources are Hans Rosenberg, Stephen Chavez, and Rick Hartley, but there are many more. These PCB design engineers have a very good perspective on what it takes to take an RF design from schematic concept to PCB layout.
Trouble in Your Tank: Causes of Plating Voids, Pre-electroless Copper
05/09/2025 | Michael Carano -- Column: Trouble in Your TankIn the business of printed circuit fabrication, yield-reducing and costly defects can easily catch even the most seasoned engineers and production personnel off guard. In this month’s column, I’ll investigate copper plating voids with their genesis in the pre-plating process steps.
Elephantech: For a Greener Tomorrow
04/16/2025 | Marcy LaRont, PCB007 MagazineNobuhiko Okamoto is the global sales and marketing manager for Elephantech Inc., a Japanese startup with a vision to make electronics more sustainable. The company is developing a metal inkjet technology that can print directly on the substrate and then give it a copper thickness by plating. In this interview, he discusses this novel technology's environmental advantages, as well as its potential benefits for the PCB manufacturing and semiconductor packaging segments.