Global Sourcing Spotlight: The Surprising World of Offshore B2B Industrial Values
Nolan’s Notes: Emerging Trends in 2025
Global Citizenship: The Future of U.S.-China Collaborations
BTU to Discuss New Process Monitor at SMTA Silicon Valley Expo
November 22, 2017 | BTU International, Inc.Estimated reading time: 1 minute
BTU International Inc. will exhibit at the SMTA Silicon Valley Expo & Tech Forum, scheduled to take place November 29, 2017 at Bestronics Inc. in San Jose, California. BTU will discuss its new Profile Guardian redundant process monitor to support Industry 4.0 and award-winning PYRAMAX platform.
Profile Guardian pairs a thermocouple probe at product height with software to monitor temperature deviation from baseline – independent from control TCs. The redundant process monitor is aware of oven state (recipe change, energy savings modes, etc.), and monitor data can be included in host communications (MES) from the oven. Additionally, it provides board level traceability when paired with bar code readers, which is a requirement for many large OEM/EMS customers.
BTU's PYRAMAX reflow oven is widely recognized as the performance leader in the reflow oven category. The exclusive closed-loop convection ensures process repeatability site-to-site, line-to-line and oven-to-oven regardless of altitude or other factors. WINCON is an advanced Windows-based software system for controlling the operation of BTU thermal processing equipment. It combines both the simplicity of a graphical user interface with powerful diagnostic and analytical tools.
About BTU International
BTU International, a wholly-owned subsidiary of Amtech Group (Nasdaq: ASYS), is a global supplier and technology leader of advanced thermal processing equipment in the electronics manufacturing market. BTU’s high-performance reflow ovens are used in the production of SMT printed circuit board assemblies and in semiconductor packaging processes. BTU also specializes in precision controlled, high-temperature belt furnaces for a wide range of custom applications, such as brazing, direct bond copper (DBC), diffusion, sintering and advanced solar cell processing. BTU has operations in North Billerica, Massachusetts, and Shanghai, China, with direct sales and service in the U.S.A., Asia and Europe.
For more information about BTU International, click here.
Share on:
Suggested Items
Designers Notebook: Impact of Advanced Semiconductor Packaging on PCB Stackup
01/07/2025 | Vern Solberg -- Column: Designer's NotebookTo accommodate new generations of high I/O semiconductor packaging, printed circuit board fabrication technology has had to undergo significant changes in both the process methods and the criteria for base material selection and construction sequence (stackup). Many of the new high-function multi-core semiconductor package families require more terminals than their predecessors, requiring a significantly narrower terminal pitch. Interconnecting these very fine-pitch, high I/O semiconductors to the PCB is made possible by an intermediate element referred to as an interposer.
BOOK EXCERPT: The Printed Circuit Designer’s Guide to... High Performance Materials, Chapter 4
01/02/2025 | I-Connect007In Chapter 4, Michael Gay discusses the two main types of copper foil used for PCB boards today: electrodeposited (ED) foil and rolled annealed (RA) foil. He also explains the pros and cons of each, and provides an update of the latest innovations in copper foil technology.
Connect the Dots: Designing for Reality—Solder Mask and Legend
01/02/2025 | Matt Stevenson -- Column: Connect the DotsIn the previous episode of I-Connect007’s On the Line with… podcast, we discussed the strip, etch, and strip process. At this point, we have a functioning board, but we still need to protect the PCB from environmental effects and document the circuit components. This brings us to the solder mask and legend phase of production.
Global PCB Connections: Following DFM Rules Leads to Better Boards
12/18/2024 | Jerome Larez -- Column: Global PCB ConnectionsAs a PCB field applications engineer, ensuring smooth communication between PCB designers and fabricators is one of my frequent challenges. A critical part of that dialogue is design for manufacturing (DFM). Many designers, even experienced ones, often misunderstand or overlook important DFM considerations. They may confuse design rules with manufacturing minimums, leading to technically feasible designs that are difficult or costly to produce. In this column, I will clarify some common DFM guidelines and help designers understand the difference between “design rules” and “minimums” while sharing best practices that will simplify the production process and ensure the highest quality PCB.
Sayonara to the Last Standing Copper Foil Plant in North America
12/17/2024 | Marcy LaRont, I-Connect007In July 2021, PCB007 Magazine published an interview with Michael Coll and Chris Stevens of Nippon Denkai about the new acquisition by Nippon Denkai of the last-standing ED foil manufacturer in North America. The plant in Augusta, Georgia, was formerly owned by Oak Mitsui, Inc. and had been purchased by Nippon Denkai the previous March, after which significant investment was made with the expectation of providing more jobs.