It’s Only Common Sense: Customer Service Is Sales in Disguise
Dan’s Biz Bookshelf: ‘Dream First, Details Later
Happy’s Tech Talk #40: Factors in PTH Reliability—Hole Voids
Nancy Jaster Brings Manufacturing, Design Background to Designers Council
November 27, 2017 | Barry Matties, I-Connect007Estimated reading time: 18 minutes
Jaster: Yes.
Matties: I know nothing's set in concrete, but why don't you share some of your conceptual ideas.
Jaster: The first thing is: I don’t know, and I don't think anyone at IPC knows, the status of all the chapters right now. So, the first thing I really want to do is a reach out to all the chapters and introduce myself. Say, "Hey, here I am. What can I do for you? Is there anything you need from me? Can you tell me how active you are? When you have a meeting, let me know, and I will make sure we will send an email blast to let people know about this."
Matties: Just provide good support.
Jaster: Support. And the first thing for me to do there is to understand who's currently active, and who isn't. Then if I see there's a big area where there may not be a chapter, or a chapter may be struggling, maybe help that chapter try to get a little more support to get them going and moving again. Because, as I'm sure you know, designers are aging, so we need to get newer people in and some younger people learning how to do the design work. I think Designers Council chapters can help do that in getting people the experience that they need to move forward in their careers.
Matties: Let's just talk about this point for a moment then. IPC is a global association. Are your chapters global?
Jaster: We're starting one in Italy now.
Matties: Because you're right. If we look in North America, the United States specifically, you're right. There's an aging population of designers. If we go to India, or we go to China, it’s not the case. We see where the young designers are. So as a global association, shouldn’t we be having chapter meetings there too?
Jaster: Yes. And we actually do have a Southeast Asia chapter.
Matties: Are they active?
Jaster: I just got an email from them, so I would say that they are active. But again, I need to reach out to them. I would assume we have one in India, but again, I don't know the activity level yet, and then we have one in Australia and we're starting one in Italy.
Matties: Now the needs of the regions will be different. So that'll be interesting to see the contrast that you come up with. I'd like to know more about that, as time progresses.
Jaster: Talk to me in six to eight months, and I may have a totally different story for you.
Matties: That would be interesting. Because when I think of Designers Council chapters, it's always been a U.S. kind of thing. You don't really hear about the rest of the world, yet we're a global industry, a global economy, and we're all connected.
Jaster: Well, we now have a staff liaison, specifically a standards development manager, Andres Ojallil, working out of Estonia, who supports standards development activities in Europe. The other part of my job is I'm a staff liaison, and I do support a number of standards. So if we build European chapters, I will be looking to Andreas to help me with those chapters. Just like we have a team in China, I would hope the IPC staff in China would be able to help me. And the staff in India that I've actually gotten to know through the NetSuite project I was working on, hopefully the folks in India can help me as well. I think IPC's got the bones of the structure there to do that. I'm just not connected enough in at this point to make it happen overnight.
Page 2 of 3
Share on:
Suggested Items
Digital Twin Concept in Copper Electroplating Process Performance
07/11/2025 | Aga Franczak, Robrecht Belis, Elsyca N.V.PCB manufacturing involves transforming a design into a physical board while meeting specific requirements. Understanding these design specifications is crucial, as they directly impact the PCB's fabrication process, performance, and yield rate. One key design specification is copper thieving—the addition of “dummy” pads across the surface that are plated along with the features designed on the outer layers. The purpose of the process is to provide a uniform distribution of copper across the outer layers to make the plating current density and plating in the holes more uniform.
Meet the Author Podcast: Martyn Gaudion Unpacks the Secrets of High-Speed PCB Design
07/10/2025 | I-Connect007In this special Meet the Author episode of the On the Line with… podcast, Nolan Johnson sits down with Martyn Gaudion, signal integrity expert, managing director of Polar Instruments, and three-time author in I-Connect007’s popular The Printed Circuit Designer’s Guide to... series.
Showing Some Constraint: Design007 Magazine July 2025
07/10/2025 | I-Connect007 Editorial TeamA robust design constraint strategy balances dozens of electrical and manufacturing trade-offs. This month, we focus on design constraints—the requirements, challenges, and best practices for setting up the right constraint strategy.
The Shaughnessy Report: Showing Some Constraint
07/14/2025 | Andy Shaughnessy -- Column: The Shaughnessy ReportWhen we first decided to cover strategies for setting PCB design constraints, one designer we spoke with said, “They’re not really constraints; they’re more like guardrails that prevent your design from going off a cliff.”
Elementary, Mr. Watson: Rein in Your Design Constraints
07/10/2025 | John Watson -- Column: Elementary, Mr. WatsonI remember the long hours spent at the light table, carefully laying down black tape to shape each trace, cutting and aligning pads with surgical precision on sheets of Mylar. I often went home with nicks on my fingers from the X-Acto knives and bits of tape all over me. It was as much an art form as it was an engineering task—tactile and methodical, requiring the patience of a sculptor. A lot has changed in PCB design over the years.