-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Hole Truth: Via Integrity in an HDI World
From the drilled hole to registration across multiple sequential lamination cycles, to the quality of your copper plating, via reliability in an HDI world is becoming an ever-greater challenge. This month we look at “The Hole Truth,” from creating the “perfect” via to how you can assure via quality and reliability, the first time, every time.
In Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
- Articles
- Columns
- Links
- Media kit
||| MENU - pcb007 Magazine
Entering—and Enjoying—the Industry
February 13, 2018 | Jonathan Zinski, I-Connect007Estimated reading time: 6 minutes

I was recently given the opportunity to write an article for our publication. Being somewhat new to this industry, I figured it would be a good idea to write an introduction on how I got into electronics—specifically the part most people my age don’t give thought to.
I remember the moment I first saw a printed circuit board. It was cold outside during Christmas at my grandma’s house, but the house was warm and full of friends and family. I was around age six or seven, a very curious kid, and we each had our own stack of presents scattered throughout the living room. When I opened one of my presents to find a Game Boy Color, a handheld video game, I was ecstatic! I immediately noticed the purple translucent case because I could see what was underneath it—a small green board. That’s when my dad said, “PCBs,” the acronym that defines our industry. I gave it little thought at the time, but that moment left a lasting impression.
Years later, my middle school technology class had an interesting learning structure with various booths and projects students would work on for a week. Stations included activities such as sewing, a CAD CNC machine that etched artwork onto plastic, a flight simulator, and the most popular, a booth where you could make a professional pen out of blocks of wood. As a kid, the choice was a difficult one for me; many students had already run over to the coolest-looking booths.
After carefully examining my options, I chose the one that reminded me of my Game Boy Color (which I still have to this day). The booth featured a soldering station with a kit to make a small blinking device with red and white LEDs. The idea of holding a hot iron inches away from my body that could turn solid metal into liquid was a bit unnerving, but I decided to take the plunge. The first section of the station involved watching short videos about series and parallel circuits, resistance, and safety. I was fascinated to learn that tree sap was part of the magic of solder and I had a blast putting together the board components. I fiddled with it all day and I even had a component fall off, so I tried to bypass the connection. Despite receiving some odd looks on the school bus at the end of the day, the whole experience, especially the blinking gizmo, left an impression that influenced me for years to come.
Caption: The original Game Boy Color, still in my possession.
Jumping to 2015, after finishing technical school in San Francisco and meeting the girl of my dreams, I moved into a cozy (extremely tiny) apartment in a hip (stupidly expensive) part of the city. I worked at a popular ice cream/chocolate shop in Ghirardelli Square. Gradually, life started to become a little repetitious; it was time to stretch myself in a new direction. My roommate suggested I check out a local hackerspace called Noisebridge. They had a weekly event called “Circuit Hacking Monday,” which turned out to be a class on soldering and putting together kits. It was a short bike ride away, so I decided to check it out.
The class was led by Mitch Altman, a man best known for inventing the TV-B-Gone—a device that functions as a universal remote and can turn off any TV from anywhere. He was extremely passionate about teaching others, especially young people, about electronics. Mitch included the TV-B-Gone in the various kits he brought for the class and it’s the one I chose to assemble. I had such a good time at this event. The smell of the rosin was nostalgically familiar to me and reminded me of my past interactions with electronics, solder, and PCBs.
I became more active at Noisebridge and attended whenever I had time. I loved digging through the e-waste bin and would disassemble any electronics I found. I even found an old retro-looking battery charger that I took apart and fixed, although fixing might not be exactly right—I simply bypassed a safety fuse that had blown.
Making the wires from an old hair dryer glow with the repaired battery charger.
Because I was interested in chemistry as much as electronics, I once took apart some lithium ion batteries for the metal inside. I had the proper gear on (i.e., ventilator, gloves, etc.) and planned to walk outside to remove the inner core of the battery. However, I failed to notify everyone else in the space of what I was doing. I’m not sure what kind of gas was released, but before I even completely removed the core, a very weird smell drifted through the room—almost sweet and fruity. When people started asking about the smell, I knew I needed to head outside. I have some other stories, but I’d rather not go into my youthful disregard for safety. Even with occasional trouble, the space was an amazing resource for me.
Eventually, I wanted to make something electronic of my own. I had an interest in renewable energy, especially drawing power from easily accessible sources. One day, I stumbled upon Peltier tiles and started investigating thermoelectrics. I found information online about low-voltage Joule Thieves and started working on a circuit that could generate enough charge to light up LEDs just from body heat. My idea was to put it into a bike helmet. The Joule Thief had a toroidal transformer core that I hand wound—100 turns in one direction and four in the other. Hand winding those small ferrite rings only made me more appreciative of the machines we have in this industry. Being a novice, it was a spectacular feeling when I got everything hooked up correctly and the lights turned on.
During this time, I still worked at the Ghirardelli ice cream/chocolate shop as a “chocolatier.” The tourist traffic never ended, and I was the guy handing out chocolate to everyone who walked in. I talked to people from all around the world. We rarely experienced unhappy customers because most people were on vacation, and after all, I was handing them free chocolate.
One fateful day, Barry Matties of I-Connect007 walked into the Ghirardelli store. We struck up a great conversation, and when we got on the subject of electronics, I enthusiastically shared my helmet project and the plans I had. We stayed in contact, and he even connected me to a local electronics manufacturer who could help me when I was ready to get my design turned into a finished PCB. Little did I know this would be my entrance into the PCB industry. A few months later, Barry hired me.
I may not have a formal education in this specific sector, but I-Connect007 has given me opportunities to learn and I’ve tried to take advantage of that. I did not grow up in the industry, but I certainly feel adopted.
I plan to keep writing about my experiences, both past and current, and about new technology trends affecting our market, such as the ever-growing 3D printing applications and their rapid advancements, which stand to benefit our industry. And of course, I’d like to give a perspective on this industry from my age group.
Until then, thanks for reading.
Additional Read:
Suggested Items
SHENMAO Strengthens Semiconductor Capabilities with Acquisition of PMTC
07/10/2025 | SHENMAOSHENMAO America, Inc. has announced the acquisition of Profound Material Technology Co., Ltd. (PMTC), a premier Taiwan-based manufacturer of high-performance solder balls for semiconductor packaging.
KYZEN to Highlight Understencil and PCB Cleaners at SMTA Querétaro Expo and Tech Forum
07/09/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at the SMTA Querétaro Expo & Tech Forum, scheduled to take place Thursday, July 24, at Centro de Congresos y Teatro Metropolitano de Querétaro.
Driving Innovation: Direct Imaging vs. Conventional Exposure
07/01/2025 | Simon Khesin -- Column: Driving InnovationMy first camera used Kodak film. I even experimented with developing photos in the bathroom, though I usually dropped the film off at a Kodak center and received the prints two weeks later, only to discover that some images were out of focus or poorly framed. Today, every smartphone contains a high-quality camera capable of producing stunning images instantly.
Hands-On Demos Now Available for Apollo Seiko’s EF and AF Selective Soldering Lines
06/30/2025 | Apollo SeikoApollo Seiko, a leading innovator in soldering technology, is excited to spotlight its expanded lineup of EF and AF Series Selective Soldering Systems, now available for live demonstrations in its newly dedicated demo room.
Indium Corporation Expert to Present on Automotive and Industrial Solder Bonding Solutions at Global Electronics Association Workshop
06/26/2025 | IndiumIndium Corporation Principal Engineer, Advanced Materials, Andy Mackie, Ph.D., MSc, will deliver a technical presentation on innovative solder bonding solutions for automotive and industrial applications at the Global Electronics A