It’s Only Common Sense: Being Your Customer’s Expert—The Key to Consultative Sales
The Chemical Connection: Surface Finishes for PCBs
The Marketing Minute: Go Big or Go Home—Long-form Content Is Your Brand’s Best Friend
Unimicron Germany Rises from the Ashes with New Smart Factory
April 30, 2018 | Pete Starkey, I-Connect007 and Michael Weinhold, EIPCEstimated reading time: 9 minutes
Figure 15: X-ray drilling machines.
Intelligent production planning meant that there was the minimum of work in progress. Where buffering capacity was necessary, the work was transported by the AGVs to an enclosed storage area until the following operation was ready to accept it.
Although some of us could have happily spent several more hours furthering our understanding of the subtleties of the manufacturing set-up, our guide was on strict instructions to be in place for the opening ceremony, so we left the factory at that point to follow him to the front of the building where a sound stage had been set up facing a mass of visitors, with marching brass bands in the background.
On the stage, CEO Gerard van Dierendonck addressed the audience, reviewed the recent history of the Geldern site, and acknowledged the efforts of all involved in bringing the project to realisation, particularly a rather weary-looking Rico Schlüter who had pulled the whole lot together.
Figure 16: Gerard van Dierendonck
Figure 17: Rico Schlüter
Figure 18: Invited guests.
There was a ceremonial cutting of the ribbon, and the bands played the National Anthem.
Figure 19: The ribbon cutting ceremony.
Page 4 of 6
Share on:
Suggested Items
IDTechEx Highlights Recyclable Materials for PCBs
04/10/2025 | IDTechExConventional printed circuit board (PCB) manufacturing is wasteful, harmful to the environment and energy intensive. This can be mitigated by the implementation of new recyclable materials and technologies, which have the potential to revolutionize electronics manufacturing.
Connect the Dots: Stop Killing Your Yield—The Hidden Cost of Design Oversights
04/03/2025 | Matt Stevenson -- Column: Connect the DotsI’ve been in this industry long enough to recognize red flags in PCB designs. When designers send over PCBs that look great on the computer screen but have hidden flaws, it can lead to manufacturing problems. I have seen this happen too often: manufacturing delays, yield losses, and designers asking, “Why didn’t anyone tell me sooner?” Here’s the thing: Minor design improvements can greatly impact manufacturing yield, and design oversights can lead to expensive bottlenecks. Here’s how to find the hidden flaws in a design and avoid disaster.
Real Time with... IPC APEX EXPO 2025: Tariffs and Supply Chains in U.S. Electronics Manufacturing
04/01/2025 | Real Time with...IPC APEX EXPOChris Mitchell, VP of Global Government Relations for IPC, discusses IPC's concerns about tariffs on copper and their impact on U.S. electronics manufacturing. He emphasizes the complexity of supply chains and the need for policymakers to understand their effects.
The Chemical Connection: Surface Finishes for PCBs
03/31/2025 | Don Ball -- Column: The Chemical ConnectionWriting about surface finishes brings a feeling of nostalgia. You see, one of my first jobs in the industry was providing technical support for surface cleaning processes and finishes to enhance dry film adhesion to copper surfaces. I’d like to take this opportunity to revisit the basics, indulge in my nostalgia, and perhaps provide some insight into why we do things the way we do them in the here and now.
NUS Physicists Discover a Copper-free High-temperature Superconducting Oxide
03/28/2025 | PRNewswireProfessor Ariando and Dr Stephen Lin Er Chow from the National University of Singapore (NUS) Department of Physics have designed and synthesised a groundbreaking new material—a copper-free superconducting oxide—capable of superconducting at approximately 40 Kelvin (K), or about minus 233 degrees Celsius (deg C), under ambient pressure.