-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Hole Truth: Via Integrity in an HDI World
From the drilled hole to registration across multiple sequential lamination cycles, to the quality of your copper plating, via reliability in an HDI world is becoming an ever-greater challenge. This month we look at “The Hole Truth,” from creating the “perfect” via to how you can assure via quality and reliability, the first time, every time.
In Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
- Articles
- Columns
- Links
- Media kit
||| MENU - pcb007 Magazine
Eltek Reports Q4 and Full Year 2017 Financial Results
May 1, 2018 | PRNewswireEstimated reading time: 3 minutes
Eltek Ltd. announced today its financial results for the fourth quarter and full year ended December 31, 2017.
Mr. Yitzhak Nissan, chairman of the board and chief executive officer, commented: "Our revenues in the full year of 2017 decreased to $32.8 million from $33.2 million in 2016, excluding Kubatronik. Our revenues increased in the fourth quarter of 2017 to $9.1 million compared to revenues of $7.3 million in the fourth quarter of 2016, excluding Kubatronik. We continue the implementation of the improvements we made in our manufacturing procedures, in order to supply our increased backlog of orders.
We see an increased demand for our products and our backlog of orders has grown significantly. I believe that the adjustments made to our manufacturing and marketing operations will assist the Company to reach its goals quickly and efficiently. I am determined to bring the Company back to profitability in the near future.
In March 2018, Nistec Ltd., the Company's controlling shareholder, extended the Company a bridge financing of NIS 4 million (approximately $1.1 million) for working capital. In addition, in April 2018, Nistec provided the Company a letter of commitment to provide additional financing in the amount of up to $2.5 million, valid for one year following the date of the approval of its 2017 financial statements. These supports, along with the financial support provided by Nistec in 2017, reflect my confidence in the Company and my belief that Eltek has the potential to overcome the manufacturing challenges and return to profitability.
The results for the fourth quarter and the full year ended December 31, 2017, do not include the operations of Kubatronik Leiterplatten GmbH, which were included in Eltek's results for the comparable periods in 2016. Therefore, we have provided selected financial information on a proforma basis, excluding Kubatronik's results for 2016," Mr. Nissan concluded.
Highlights of the Full Year of 2017 compared to the Full Year of 2016
- Revenues for the full year of 2017 amounted to $32.8 million compared to revenues of $37.1 million in 2016 ($33.2 million excluding Kubatronik).
- Gross profit was $1.3 million (4.1% of revenues), compared to gross profit of $2.8 million (7.6% of revenues) in 2016, ($2.8 million or 8.3% of revenues excluding Kubatronik).
- Operating loss was $3.4 million compared to an operating loss of $2 million in 2016, ($1.6 million excluding Kubatronik).
- Net loss was $3.8 million or $1.86 per fully diluted share, compared to a net loss of $3.6 million or $1.79 per fully diluted share in 2016 (a net loss of $3.2 million or $1.6 per fully diluted share excluding Kubatronik).
- EBITDA was a negative $1.3 million compared to a negative $313,000 in the 2016 (a negative $124,000 excluding Kubatronik).
- Net cash used in operating activities amounted to $3.4 million compared to $165,000 provided by operating activities in 2016.
- Cash and cash equivalents as of December 31, 2017 were $887,000, compared to $1.2 million as of December 31, 2016.
Highlights of the Fourth Quarter of 2017 compared to the Fourth Quarter of 2016
- Revenues for the fourth quarter of 2017 were $9.1 million compared to revenues of $8.1 million in the fourth quarter of 2016 ($7.3 million excluding Kubatronik).
- Gross profit was $740,000 (8.1% of revenues) compared to a gross loss of $463,000 (5.7% of revenues) in the fourth quarter of 2016 (gross loss of $283,000 or 3.9% of revenues excluding Kubatronik).
- Operating loss was $568,000 compared to an operating loss of $1.6 million in the fourth quarter of 2016 (an operating loss of $1.4 million excluding Kubatronik).
- Net loss was $669,000 or $0.33 per fully diluted share compared to a net loss of $3 million or $1.48 per fully diluted share in the fourth quarter of 2016 (a net loss of $2.8 million or $1.4 per fully diluted share excluding Kubatronik).
- EBITDA was a negative $130,000 compared to a negative $1.4 million in the fourth quarter of 2016 (a negative $1.2 million excluding Kubatronik).
- Net cash used in operating activities amounted to $775,000 compared to $1.3 million of cash used in operating activities in the fourth quarter of 2016.
About Eltek
Eltek – "Innovation Across the Board", is a global manufacturer and supplier of technologically advanced solutions in the field of printed circuit boards (PCBs), and is the Israeli leader in this industry. PCBs are the core circuitry of most electronic devices. Eltek specializes in the manufacture and supply of complex and high quality PCBs, HDI, multilayered and flex-rigid boards for the high-end market. Eltek has ITAR, AS-9100 and NADCAP Electronics permits and its customers include top of the line companies in the defense, aerospace and medical industries in Israel, the United States, Europe and Asia.
Eltek was founded in 1970. The Company's headquarters, and R&D, production and marketing center is located in Israel. Eltek operates also through its subsidiaries in North America and Europe, and by agents and distributors in Europe, India, South Africa and South America.
For more information, click here.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
06/27/2025 | Nolan Johnson, I-Connect007While news outside our industry keeps our attention occupied, the big news inside the industry is the rechristening of IPC as the Global Electronics Association. My must-reads begins with Marcy LaRont’s exclusive and informative interview with Dr. John Mitchell, president and CEO of the Global Electronics Association. For designers, have we finally reached the point in time where autorouters will fulfill their potential?
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
06/25/2025 | Nash Bell -- Column: Knocking Down the Bone PileTin whiskers are slender, hair-like metallic growths that can develop on the surface of tin-plated electronic components. Typically measuring a few micrometers in diameter and growing several millimeters in length, they form through an electrochemical process influenced by environmental factors such as temperature variations, mechanical or compressive stress, and the aging of solder alloys.
RTX, the Singapore Economic Development Board Sign MOU Outlining 10-year Growth Roadmap
06/20/2025 | RTXRTX and the Singapore Economic Development Board (EDB) have signed a Memorandum of Understanding (MoU) which outlines a 10-year roadmap to further long-term strategic collaboration in Singapore.
Indra Signs Agreement with AXISCADES to Boost Production of Cutting-Edge Systems in India
06/18/2025 | PRNewswireParis Air Show -- Indra and the Indian technology company AXISCADES have signed an agreement to collaborate on the production of solutions for the aerospace and defense markets.
GKN Aerospace Delivers First High Voltage EWIS System for Clean Aviation’s SWITCH Project
06/16/2025 | GKN AerospaceGKN Aerospace has completed and delivered the first high voltage Electrical Wiring Interconnection System (EWIS) for the Clean Aviation SWITCH project.