It’s Only Common Sense: Selling to Today's Generation of Buyers
Dan’s Biz Bookshelf: ‘Believe in Better'
The Big Picture: Our Big ‘Why’ in the Age of AI
Candor Industries Produces One of the First Multilayer PCBs with Cobritherm
May 31, 2018 | Candor IndustriesEstimated reading time: 1 minute
Candor Industries is one of the first board shops in North American to produce a multilayer PCB with Aismalibar’s Cobritherm material. Cobritherm is thick aluminum-based substrate, cladded in ED copper foil and designed for an effective thermal dissipation and high electrical insulation.
The non-conductive via filled, four-layer, 30 mil multilayer board was based on Cobritherm 2.2W material which allows for better thermal dissipation than a standard FR-4 construction.
"Using our positive acting photo resist and simplified process philosophy, we were able to not only build an effective board, but we also saved the customer in design rev costs,” remarked Candor Industries president Yogen Patel. “We believe our innovative processes allow our customers to unlock new materials for their challenging requirements, as in project such as this."
While the design was a four-layer board, Candor believes the process will scale well for future higher layer counts.
About Candor Industries
Since 1999, Candor Industries has provided 21st century customers with innovative PCB solutions for complex technologies through a commitment to service and support. Limitations created by standard manufacturing methods led Candor to invent and develop certain technological advancements, helping them to emerge in the forefront as a top of the line solutions provider. Candor continues to push the envelope of PCB manufacturing through continuous R&D, helping both customers and the industry to a brighter future. For more information about Candor, click here.
Share on:
Suggested Items
The Evolution of Picosecond Laser Drilling
06/19/2025 | Marcy LaRont, PCB007 MagazineIs it hard to imagine a single laser pulse reduced not only from nanoseconds to picoseconds in its pulse duration, but even to femtoseconds? Well, buckle up because it seems we are there. In this interview, Dr. Stefan Rung, technical director of laser machines at Schmoll Maschinen GmbH, traces the technology trajectory of the laser drill from the CO2 laser to cutting-edge picosecond and hybrid laser drilling systems, highlighting the benefits and limitations of each method, and demonstrating how laser innovations are shaping the future of PCB fabrication.
Day 2: More Cutting-edge Insights at the EIPC Summer Conference
06/18/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) summer conference took place this year in Edinburgh, Scotland, June 3-4. This is the third of three articles on the conference. The other two cover Day 1’s sessions and the opening keynote speech. Below is a recap of the second day’s sessions.
Day 1: Cutting Edge Insights at the EIPC Summer Conference
06/17/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) Summer Conference took place this year in Edinburgh, Scotland, June 3-4. This is the second of three articles on the conference. The other two cover the keynote speeches and Day 2 of the technical conference. Below is a recap of the first day’s sessions.
Preventing Surface Prep Defects and Ensuring Reliability
06/10/2025 | Marcy LaRont, PCB007 MagazineIn printed circuit board (PCB) fabrication, surface preparation is a critical process that ensures strong adhesion, reliable plating, and long-term product performance. Without proper surface treatment, manufacturers may encounter defects such as delamination, poor solder mask adhesion, and plating failures. This article examines key surface preparation techniques, common defects resulting from improper processes, and real-world case studies that illustrate best practices.
RF PCB Design Tips and Tricks
05/08/2025 | Cherie Litson, EPTAC MIT CID/CID+There are many great books, videos, and information online about designing PCBs for RF circuits. A few of my favorite RF sources are Hans Rosenberg, Stephen Chavez, and Rick Hartley, but there are many more. These PCB design engineers have a very good perspective on what it takes to take an RF design from schematic concept to PCB layout.