American Made Advocacy: Success in Washington Requires Patience, Persistence, and Sustained Focus
The Government Circuit: News on Defense Electronics, Europe, and Sustainability
Defense Speak Interpreted: SWaPing Nanosatellites for Defense Systems
Orange Co. Designers Council Meeting June 28 in Irvine
June 13, 2018 | Scott McCurdy, Freedom CAD ServicesEstimated reading time: 2 minutes
For the monthly Lunch ‘n Learn meeting on June 28, the Orange County chapter of the IPC Designers Council features two guest speakers with informative presentations on multiboard design and material solutions to address skew.
Presentation 1: Addressing the Challenges of Multiboard Design: Taking the “Big Picture” Approach to System Design
Speaker: Chris Carlson, CID, Senior Field Applications Engineer with Altium
As technology becomes more complex and miniaturized, the need for more complex multiboard systems arise. Clear lines between layout, mechanical and performance concerns begin to blur, which creates the need for PCB designers to take a more holistic view of the system.
In this presentation, Chris Carlson will discuss the unique and varied challenges that arise when doing multiboard system designs. He will review the considerations relative to partitioning the PCB, connection management, connector libraries and planning the layout. He will also discuss mechanical features, managing signals, thermal management, reliability, and power and signal integrity. Finally, Carlson will show how to ensure good mechanical fit by making the most of your 3D CAD functionality.
Presentation 2: Design and Manufacturing Developments to Lower Insertion Loss and Digital Pair Skew: What a Designer Needs to Know About Meeting 56Gb/S Speed Challenges
Speaker: Norm Berry, Director of Laminate and OEM Marketing, Insulectro
As frequency increases, differential pair skew and insertion loss become critical considerations for PCB design and manufacture. Add the ever-increasing complexity of reliable designs, while balancing value/cost performance, and the manufacturing options become more challenging. The designer needs to be aware of advancements in the base material manufacture and the options available to the fabricator.
Whether we are concerned with the demands of HDI designs with stacked, laser-drilled microvias or insertion loss on high-speed digital backplanes, the base material composite, with low-profile copper and a mechanically spread glass reinforcement, has a direct impact. Backplanes operating at 56Gb/s require the integration all these factors and the newly developed manufacturing technologies.
The cost is $10 at the door. Altium is sponsoring the event by helping with the cost of the lunches.
There are two ways to RSVP:
- Click here to RSVP online
- Email your RSVP to Scott McCurdy
Please RSVP no later than noon on Wednesday, June 27. Reserve a spot on your calendar on Thursday, June 28 from 11:30 am to 1:30 pm for this educational Lunch ‘n Learn event.
Location
Harvard Athletic Park (The multi-purpose room is at the SOUTH end of the athletic fields)
14701 Harvard Ave.
Irvine, California
92606
Share on:
Suggested Items
Global PCB Connections: Following DFM Rules Leads to Better Boards
12/18/2024 | Jerome Larez -- Column: Global PCB ConnectionsAs a PCB field applications engineer, ensuring smooth communication between PCB designers and fabricators is one of my frequent challenges. A critical part of that dialogue is design for manufacturing (DFM). Many designers, even experienced ones, often misunderstand or overlook important DFM considerations. They may confuse design rules with manufacturing minimums, leading to technically feasible designs that are difficult or costly to produce. In this column, I will clarify some common DFM guidelines and help designers understand the difference between “design rules” and “minimums” while sharing best practices that will simplify the production process and ensure the highest quality PCB.
Sayonara to the Last Standing Copper Foil Plant in North America
12/17/2024 | Marcy LaRont, I-Connect007In July 2021, PCB007 Magazine published an interview with Michael Coll and Chris Stevens of Nippon Denkai about the new acquisition by Nippon Denkai of the last-standing ED foil manufacturer in North America. The plant in Augusta, Georgia, was formerly owned by Oak Mitsui, Inc. and had been purchased by Nippon Denkai the previous March, after which significant investment was made with the expectation of providing more jobs.
SCHMID Group Unveils Enhanced InfinityLine H+ for Electroless Copper Deposition
12/16/2024 | SCHMID GroupThe SCHMID Group, a global leader in high-tech solutions for the electronics industry, proudly announces significant updates to its flagship InfinityLine H+ Electroless Cu system. Specifically designed for the production of high- performance advanced packaging applications using mSAP and SAP processes, the system reflects SCHMID’s expertise in horizontal electroless copper deposition.
OKI Develops PCB Technology with Stepped Copper Coin Insertion to Achieve 55 Times Better Heat Dissipation in Outer Space
12/12/2024 | BUSINESS WIREThe OKI Group printed circuit board (PCB) business company OKI Circuit Technology has successfully developed multilayer PCB technology with stepped copper coin insertion to achieve 55 times better heat dissipation compared to conventional PCB. The stepped copper coin is offered in two types, circular and rectangular, to suit the shape of the electronic component mounted on the PCB. OTC is working to develop mass-production technologies with the aim of introducing PCBs incorporating this new technology into markets for compact devices or devices used in outer space or other environments where air cooling technology cannot be used.
Fresh PCB Concepts: PCB Plating Process Overview
12/12/2024 | Team NCAB -- Column: Fresh PCB ConceptsIn this installment of Fresh PCB Concepts, Mike Marshall takes the helm stating: PCBs have been the platform for the interconnection of electronic components for decades. Because of process costs and other constraints, such as mechanical properties or size limitations of the alternatives, PCBs will remain the standard low-cost interconnection technology. Rapidly increasing performance and functionality requirements of wireless and high-speed devices have challenged the development and implementation of new manufacturing solutions.