Microtek Laboratories China Adds High-Tech Reflow Oven for Automotive and Transportation Reflow Simulation Testing
June 26, 2018 | Microtek Laboratories ChinaEstimated reading time: 1 minute
Microtek is proud to announce the addition of a 13-zone, active-cooled, Heller reflow oven at its Changzhou, China facility to accomplish reflow preconditioning for test samples. Automotive and Transportation Reliability testing requires aggressive reflow preconditioning cycles prior to reliability testing that demand a 13 zone oven with active water cooling to accomplish properly.
The new reflow oven is also equipped to use an inert nitrogen environment for reflow that protects the soldermask and surface finish from degradation due to oxidation during reflow exposure. Microtek’s commitment to Automotive and Transportation testing also includes the use of 10 thermal shock chambers equipped for "Single Hole" or "Daisy Chain" reliability testing along with 28 humidity and HAST chambers equipped with 256 channels of CAF/ECM/SIR testing capability up to 2000VDC.
About Microtek Laboratories China
Microtek Laboratories China is a leading third-party testing agency, serving the electronics and polymeric materials manufacturing industry world-wide. It is operated in accordance with the ISO/IEC17025: 2005 management system, accredited by CNAS, CMA, and many large OEM’s. The lab provides testing and conformance verification to company, national & international standards for automotive, telecommunication, aerospace & aviation, electronic information products, polymeric products and other related industries and suppliers. It is a CQC licensed lab for "Non-metal materials" including printed circuit boards (PCB), copper-clad laminates (CCL) and plastics. The lab is also designated as the product service center for CPCA, an authorized training center for IPC-6012, IPC-A-610 & IPC-A-600, as well as a IPC Validation Services Qualified Test Laboratory for IPC-6012 and IPC-4101. In addition, Microtek Laboratories China has the capability of temperature and humidity calibration as recognized by CNAS. For more information, click here.
Suggested Items
DuPont Showcases AI Innovations Featuring Advanced Interconnects at 2024 International Electronic Circuits Exhibition
05/13/2024 | DuPontDuPont announced it will showcase its comprehensive range of advanced circuit materials and solutions at the 2024 International Electronic Circuits Exhibition in Shanghai. With a product portfolio that includes fine line, signal integrity, power and thermal management, DuPont will exhibit at Booth #8L06 at the National Exhibition and Convention Center (NECC) from May 13 to 15.
MKS’ Atotech to Participate in ECTC
05/10/2024 | MKS’ AtotechAt this year’s 74th IEEE Electronic Components and Technology Conference (ECTC), MKS’ Atotech will present and demonstrate its latest product and service innovations.
The Chemical Connection: Reducing Etch System Water Usage, Part 2
05/02/2024 | Don Ball -- Column: The Chemical ConnectionIn my last column, I reviewed some relatively simple ways to reduce water usage in existing etch systems: cutting down cooling coil water flow, adding chillers to replace plant water for cooling, lowering flow rate nozzles for rinses, etc. This month, I’ll continue with more ways to control water usage in your etcher. Most of these are not easily retrofittable to existing equipment but should be given serious consideration when new equipment is contemplated. With the right combination of add-ons, it is possible to bring the amount of water used in an etch system to almost zero.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.