UK Manufacturing Sector Remains Subdued at Q2
July 2, 2018 | IHS MarkitEstimated reading time: 3 minutes
The performance of the UK manufacturing sector remained relatively subdued in June, especially when compared to the marked pace of growth seen before the turn of the year. Output growth moderated, to largely offset a mild acceleration in new order growth and improved job creation. The survey was conducted between 12-26 June.
At 54.4 in June, the seasonally adjusted IHS Markit/CIPS Purchasing Managers’ Index® (PMI®) was a tick above May’s downwardly revised reading of 54.3 (originally 54.4) and stands almost four points below the 51-month high reached in November last year. The average reading over quarter two as a whole (54.2) is the weakest outcome since the final quarter of 2016.
Sector data indicated that the upturn remained broad-based during June. Output and new orders rose across the consumer, intermediate and investment goods industries. However, the overall rate of expansion in manufacturing output slowed, as growth of new order inflows improved only mildly. Some companies noted that higher output had been partly sustained through inventory-building and clearing backlogs of work.
Although the rate of increase in new business edged up to a three-month high, it remained among the weakest registered over the past year-and-a-half. Rates of growth in new work received were broadly steady in both domestic and overseas markets. Where an increase in new export business was reported, this was partly linked to increased sales to mainland Europe, China, South America and Australia.
June saw a solid improvement in the rate of job creation, with staffing levels rising at the quickest pace for three months. Employment increased across the consumer, intermediate and investment goods sectors. However, the overall rate of jobs growth remained below those seen through much of 2017.
Input cost inflation accelerated to a four-month high in June, with companies reporting a wide range of inputs as up in price. Some noted that cost increases were being exacerbated by shortages of certain raw materials. Part of the rise in costs was passed on as higher selling prices.
Business optimism remained positive in June. Over 51% of the survey panel forecast output to rise over the coming year, linked to market growth, investment spending, organic expansion, planned promotional activity and higher capacity. However, the degree of positivity dipped to a seven-month low, as some firms expressed concerns about input price increases, possible future trade tariffs, the exchange rate and Brexit uncertainty.
Comments:
Rob Dobson, director at IHS Markit, which compiles the survey:
“The UK manufacturing sector ended the second quarter on a subdued footing. The turnaround in performance since the start the year has been remarkable, with impressive growth rates late last year turning into some of the weakest rates of expansion seen over the past two years in recent months.
“The slowdown in new order growth since earlier in the year has also left manufacturers increasingly reliant on backlogs of work and inventory building to maintain higher output. This is a position that cannot be sustained far beyond the immediate horizon. The trend in demand will need to stage a much firmer rebound if a further slowdown in output growth is to be avoided.
“How likely such a revival is remains in some doubt, with the June survey also seeing business optimism drop to a seven-month low amid rising concerns about possible trade tariffs, the exchange rate and Brexit uncertainty. Ongoing supply-chain disruptions, including raw material shortages, and signs of a renewed upswing in input price inflation may also jeopardise stronger manufacturing growth. With industry potentially stuck in the doldrums, the UK economy will need to look to other sectors if GDP growth is to match expectations in the latter half of the year.”
Duncan Brock, group director at the Chartered Institute of Procurement & Supply:
“A gentle hush descended over the sector in June as growth of new orders was amongst the lowest in 18 months and the almost imperceptible rise in manufacturing output was more about housekeeping and clearing up backlogs than tackling new business.
“The undercurrent of uncertainty was once again the main culprit as clients hesitated to place orders resulting in the overall index average over the second quarter becoming the weakest since the end of 2016 and optimism falling to a seven-month low in June.
“Material shortages and the highest rise in input price inflation since February also disrupted supply chains so managers tried to beat future price rises by buying up materials already in short supply and in case suppliers continued to fail in their obligations as delivery times worsened again this month.
“This diminishing strength in the sector will be a setback, but with an increase in hiring and continued optimism resulting in new products and markets, the sector may yet beat the Brexit blues.”
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
I-Connect007 Launches Advanced Electronics Packaging Digest
09/15/2025 | I-Connect007I-Connect007 is pleased to announce the launch of Advanced Electronics Packaging Digest (AEPD), a new monthly digital newsletter dedicated to one of the most critical and rapidly evolving areas of electronics manufacturing: advanced packaging at the interconnect level.
ICAPE Group Unveils Exclusive Report on Sustainability in Electronics Manufacturing
09/15/2025 | ICAPE GroupICAPE Group, a global leader in printed circuit boards (PCBs) and custom electronics manufacturing, today announces the launch of its 2025 Industry Outlook & Innovation Report: Sustainability in Electronics Manufacturing. This exclusive report is accompanied by fresh insights from a dedicated Statista survey of 100 electronics manufacturing professionals, commissioned by ICAPE Group.
Panasonic Industry will Double the Production Capacity of MEGTRON Multi-layer Circuit Board Materials Over the Next Five Years
09/15/2025 | Panasonic Industry Co., Ltd.Panasonic Industry Co., Ltd., a Panasonic Group company, announced plans for a major expansion of its global production capacity for MEGTRON multi-layer circuit board materials today. The company plans to double its production over the next five years to meet growing demand in the AI server and ICT infrastructure markets.
Sustainability and Selective Soldering
09/15/2025 | Dr. Samuel J. McMaster, Pillarhouse InternationalSustainability is more than just a buzzword for the electronics industry; it’s a key goal for all manufacturing processes. This is more than a box-ticking exercise or simply doing a small part for environmentally friendly processes. Moving toward sustainable solutions drives innovation and operational efficiency.
ASM Technologies Limited signs MoU with the Guidance, Government of Tamilnadu to Expand Design-Led Manufacturing capabilities for ESDM
09/15/2025 | ASM TechnologiesASM Technologies Limited, a pioneer in Design- Led Manufacturing in the semiconductor and automotive industries, announced signing of Memorandum of Understanding (MoU) with the Guidance, Government of Tamilnadu whereby it will invest Rs. 250 crores in the state to expand its ESDM related Design-Led Manufacturing and precision engineering capacity. ASM Technologies will acquire 5 acres of land from the Government of Tamilnadu to set up a state-of-the-art design facility in Tamil Nadu's growing technology manufacturing ecosystem, providing a strong strategic advantage and long-term benefits for ASM.