Antennas for Extremely Fast Wireless Internet
July 20, 2018 | TU/eEstimated reading time: 1 minute
NWO has granted a Take-off feasibility study for the start-up of the new spin-off MaxWaves, which aims to commercialize new wireless technology to enable extremely fast 5G and 6G. In the system, developed in the research group of Professor Bart Smolders at the Department of Electrical Engineering, the antennas direct the signals electronically in the right direction, so that it is very energy efficient and the signals are not disturbed by weather conditions.
In a few years' time, everyone will probably switch from the current 4G Internet to 5G and later to 6G, leading to data rates that by 2025 will be as much as 100 times higher than they are today. This means that the antennas on the base stations - which have to operate tens to hundreds of mobile users at the same time - will have to exchange far greater amounts of information than they do today. The technology to do this is now being developed.
Series of coupled antennas
The group of Prof. Dr. Bart Smolders has developed a new antenna technology that allows future base stations to be connected wirelessly with each other at extremely high data rates by using a whole series of electronically coupled antennas. These steer the radio beams in the right direction, so that dishes with these antennas do not have to move physically in order to change the direction of transmission.
This technology uses very little energy and can continue to function optimally in all weather conditions, as electronic control can adapt directly to wind and rain disturbances. The electronic beam control ensures that no cables are needed in the ground and that the system can be electronically configured, making it very easy to temporarily expand network capacity, for example at a major event.
Take-off
TU/e-spinoff MaxWaves will commercialize this system for future 5G networks, and the Take-off feasibility study will build a new prototype that is more advanced than the two prototypes previously built. This will be tested experimentally in the lab and on the TU/e campus, and a market analysis will be carried out to arrive at a business plan.
Suggested Items
Marcy’s Musings: The ‘Magic’ of Additive Processes
05/21/2024 | Marcy LaRont -- Column: Marcy's MusingsThough modern semi-additive and fully additive technologies are still emerging for PCB manufacturing, additive technology itself is not new. Many PCB fabricators find themselves at a crossroads when deciding whether to change their current processes and go additive or stay the course until something significant compels a change. But change is on the horizon, and it seems to be driven by significant technological advancements in chips and advanced packaging, offering PCB fabricators some additive manufacturing solutions to explore.
Textron Systems Collaborates with Kodiak to Develop Uncrewed Military Vehicle
05/20/2024 | PRNewswireTextron Systems Corporation, a Textron Inc. company, a leading developer of crewed and uncrewed military ground vehicles, and Kodiak Robotics, Inc., a leading self-driving technology developer for the trucking and defense markets, announced that they are collaborating to develop an autonomous military ground vehicle specifically designed for driverless operations.
Additive Manufacturing: PCB007 Magazine May 2024 Issue
05/20/2024 | I-Connect007 Editorial TeamThough modern semi-additive and fully additive technologies are still emerging for PCB manufacturing, additive technology itself is not new. In this month’s issue, we explore additive manufacturing technology for the PCB fabricator: where it stands today, the true benefits, and where it seems to be headed.
Terran Orbital’s GEOStare SV2 Captures 3 Years of Success in High-Resolution Imaging
05/17/2024 | BUSINESS WIRETerran Orbital Corporation, a global leader in satellite-based solutions primarily serving the aerospace and defense industries, celebrates the 3rd anniversary of its successful GEOStare SV2 mission. Launched on May 15, 2021, from NASA’s Kennedy Space Center in Florida, GEOStare SV2 has surpassed expectations, delivering exceptional results for commercial satellite imagery.
Indium Experts to Present on High-Temperature, Lead-Free Solder Paste and High Reliability Liquid Metal Alloys Poster at ECTC
05/16/2024 | Indium CorporationIndium Corporation Research Associate Kyle Aserian will deliver a presentation at the 74th Electronic Components and Technology Conference (ECTC) on May 31, in Denver, Colorado.