-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueIn Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
The Essential Guide to Surface Finishes
We go back to basics this month with a recount of a little history, and look forward to addressing the many challenges that high density, high frequency, adhesion, SI, and corrosion concerns for harsh environments bring to the fore. We compare and contrast surface finishes by type and application, take a hard look at the many iterations of gold plating, and address palladium as a surface finish.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
Oxford PV Leads Consortium to Prepare Perovskite Solar Cells for High Volume Manufacturing
August 24, 2018 | Oxford PVEstimated reading time: 1 minute
The Perovskite Company announced a new consortium to further demonstrate the manufacturability of perovskite-silicon tandem solar cells. The project has received Euro 2.8 million from the German Ministry of Economic Affairs and Energy as part of its wider investment programme into renewable energy development.
The consortium led by Oxford PV additionally comprises VON ARDENNE GmbH, Helmholtz-Zentrum Berlin, Fraunhofer Institute for Solar Energy Systems, and the Technical University of Berlin.
The project will focus on preparing perovskite solar cell technology for high volume manufacturing. This will include the optimisation of the perovskite-silicon tandem solar cell architecture, to make further efficiency improvements on industrial 156 mm x 156 mm wafer formats; the refinement of industrial scale process technology; and life-cycle analysis to inform the social-environmental impact of the tandem solar cells.
Frank P. Averdung, chief executive officer at Oxford PV commented, “The German Government’s investment recognises the opportunity perovskite solar technology has to dramatically enhance the performance of solar energy generation. Oxford PV has made substantial progress in scaling and preparing its technology for high volume manufacturing. With commercial sized tandem cells already in production at our pilot line – it is now a matter of further optimising the process, in preparation for commercial deployment.”
Dr Chris Case, Chief Technology Officer at Oxford PV added “The consortium partners bring together the perfect balance of expertise. Refining the manufacturing process of our perovskite solar cell technology will ensure the highest performing tandem solar cell in the field and the easy transfer of our technology into silicon solar cell and module production lines.”
Last month Oxford PV achieved a world record certified efficiency of 27.3% for its perovskite solar cell. This exceeded the 26.7% efficiency world record for a single junction silicon solar cell - validating the ability of perovskite to enhance the performance of silicon-based photovoltaics. Oxford PV’s perovskite-silicon solar cell technology roadmap extends beyond 30% efficiency.
Suggested Items
Rehm Thermal Systems Mexico: Ten Years of Growth and Innovation in an Emerging Market
06/03/2025 | Rehm Thermal SystemsOver ten years ago, Luis A. Garcia began his success story at Rehm Thermal Systems. On May 15, 2013, he initially joined as a member of the Rehm USA team.
IIT Kharagpur, A*STAR Singapore Forge Strategic Partnership to Advance Semiconductor Innovation in Asia
06/03/2025 | IIT KharagpurIn a landmark move to foster global collaboration in semiconductor research and talent development, IIT Kharagpur has signed a Memorandum of Understanding (MoU) with the Institute of Microelectronics (IME) under Singapore’s Agency for Science, Technology and Research (A*STAR).
STARTEAM GLOBAL Unveils Innovative Additive Solder Mask Process
06/02/2025 | STARTEAM GLOBALSTARTEAM GLOBAL, a leading PCB manufacturer, has introduced a revolutionary additive solder mask process at its Flero STARTEAM (FST) factory in Italy, leveraging digital inkjet technology to enhance production efficiency and sustainability.
Strategic Materials Conference 2025 Spotlights Materials Innovation to Advance Semiconductor Manufacturing
06/02/2025 | SEMIWith materials innovation at the core of next-generation semiconductor technologies, the Strategic Materials Conference (SMC) 2025 brings together top executives and technology leaders from the semiconductor manufacturing industry for exclusive insights into the latest trends and advancements.
CACI to Deliver Additional SIGINT and EW Technology for U.S. Army Soldiers with TLS BCT Manpack
06/02/2025 | CACI International Inc.CACI International Inc announced that a contract modification has been awarded by the U.S. Army to continue procurement, training, and fielding for the Terrestrial Layer System Brigade Combat Team Manpack (TLS BCT Manpack).