-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Uyemura to Exhibit and Speak at IPC APEX EXPO 2019
December 4, 2018 | UyemuraEstimated reading time: 1 minute
Uyemura will exhibit several unique technologies—each designed to meet a specific need—as board shops face unprecedented demands for thicker gold, void-free via fill and low corrosion.
Industry experts who have been intimately involved with process development—and field engineers with extensive production experience—will be in Booth 533 for consultations and technical discussions during the 3-day conference.
Highlights of Uyemura’s exhibit include TWX-40 a reduction-assisted immersion bath that meets the demand for gold deposits (up to 8 µin) in ENIG and ENEPIG systems while preserving electroless nickel integrity; Talon electroless/alloyed palladium phos for ENEPIG; and EVF-YF-4 via fill copper, which pattern plates uniformly, and plates through-holes and blind vias simultaneously.
Rich DePoto, Uyemura manager of business development will present “Contrasting Soldering Results of ENIG and EPIG, Post Steam Aging” as part of the technical program. Jon Bengston, manager of research and development, is the paper’s author. ENIG, (electroless nickel immersion gold) is well-established for enhancing and preserving the solderability of copper circuits. EPIG (electroless palladium immersion gold) is a newer surface finish, also for enhancing solderability but with the advantage of a deposit layer that’s free of electroless nickel. This feature has become increasingly important with the increasing use of High Frequency PWB designs. DePoto will examine these finishes and their soldering characteristics as-plated and after steam aging, and explain the performance deviation.
Suggested Items
DuPont Showcases AI Innovations Featuring Advanced Interconnects at 2024 International Electronic Circuits Exhibition
05/13/2024 | DuPontDuPont announced it will showcase its comprehensive range of advanced circuit materials and solutions at the 2024 International Electronic Circuits Exhibition in Shanghai. With a product portfolio that includes fine line, signal integrity, power and thermal management, DuPont will exhibit at Booth #8L06 at the National Exhibition and Convention Center (NECC) from May 13 to 15.
MKS’ Atotech to Participate in ECTC
05/10/2024 | MKS’ AtotechAt this year’s 74th IEEE Electronic Components and Technology Conference (ECTC), MKS’ Atotech will present and demonstrate its latest product and service innovations.
The Chemical Connection: Reducing Etch System Water Usage, Part 2
05/02/2024 | Don Ball -- Column: The Chemical ConnectionIn my last column, I reviewed some relatively simple ways to reduce water usage in existing etch systems: cutting down cooling coil water flow, adding chillers to replace plant water for cooling, lowering flow rate nozzles for rinses, etc. This month, I’ll continue with more ways to control water usage in your etcher. Most of these are not easily retrofittable to existing equipment but should be given serious consideration when new equipment is contemplated. With the right combination of add-ons, it is possible to bring the amount of water used in an etch system to almost zero.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.