The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
BTU International’s Fred Dimock to Present at SMTA Capital Chapter Meeting
December 17, 2018 | BTU International, Inc.Estimated reading time: 1 minute
BTU International’s Fred Dimock, manager of process technology, will present during the upcoming SMTA Capital Chapter Meeting. Dimock will present “Operation of a Vacuum Reflow Oven with Preliminary Void Reduction Data” at the meeting, scheduled to take place Thursday, January 10, 2019 from 5:00-7:30 p.m. at ZESTRON in Manassas, Virginia.
This presentation will provide an overview of the vacuum reflow process and explain the reason vacuum reflow is of interest to the electronic assembly industry. Additionally, Dimock will present a report on preliminary data from a void reduction experiment completed at the Universal Instruments Process Laboratory.
Dimock has taught numerous SMTA solder reflow classes and has participated in the 5-45 subcommittee for the development of IPC-7801 Reflow Oven Process Control Standard. He wrote the chapter on solder reflow for the ‘Handbook of Electronic Assembly’ and ‘A Guide to SMTA Certification’ by Dr. Lasky and Jim Hall.
Dimock holds an Associate’s Degree in Mechanical Design from Wentworth in Boston and a Bachelor’s Degree in Ceramic Engineering from the State University of New York at Alfred (SUNY). He is a long-standing member of the SMTA Technical Committee.
Don’t miss out on dinner and a facility tour prior to the presentation. Registration is free for members and $30 for non-members. The registration fee will be waived if you join the Capital Chapter during this event.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.