Standard of Excellence: Anticipating Customer Needs Early and Often
The Knowledge Base: At the Forefront of Electronics Manufacturing
Global Citizenship: Training the Next Generation of Talent
Metcal Soldering, Rework Tech at IPC APEX EXPO 2019
January 7, 2019 | MetcalEstimated reading time: 1 minute
Metcal plans to exhibit at the 2019 IPC APEX EXPO, scheduled to take place January 29-31, 2019 at the San Diego Convention Center. The company will demonstrate its connection validation (CV) Robotic Soldering System, CV Soldering System with new hand-pieces, CV-500 Soldering System and VFX-1000H Volume Fume Extraction System in booth #1314.
CV Robotic Soldering System
Robotic soldering is becoming more commonplace as manufacturers look to reduce risk and increase productivity. Metcal’s new CV Robotic Soldering System addresses these needs by combining its patented CV technology with a new Smart Interface System. CV reduces unnecessary dwell time by signalling to the system to move to the next solder joint in the program after a good joint is formed. The Smart Interface System simplifies the programming process by integrating system controls through an easy to use interface.
CV Soldering System
Metcal will introduce the latest CV hand-pieces and assorted cartridges that transform the CV-5200 soldering system into the solution for even the most challenging soldering applications. All of the new hand-pieces are now available with a number of unique tip cartridge geometries. The tip cartridges are available in a variety of temperature series to satisfy the most challenging applications.
CV-500 Soldering System
The CV-500 soldering system excels at SMD touch-up and small component rework using the Ultrafine hand-piece and Ultrafine tweezer hand-piece(both sold separately). The CV-500 system also features Smartheart™ power on demand technology, a 2.8" color touchscreen with bold graphics, an integrated net power meter with optional tip temperature display and much more.
The CV-500 is compatible with most hand-pieces and upgrade kits for the CV soldering system. These ergonomic hand-pieces transform the CV system into a complete soldering solution for a wide variety of applications.
VFX-1000H Volume Fume Extraction System
The volume fume extraction system with HEPA filter offers a deep pleat pre-filter, a filter change/ system fail signal, and long life filters with low replacement costs. Additional features include built-in silencing, remote speed control, a remote start/stop interface and universal voltage.
Share on:
Suggested Items
KYZEN to Highlight Stencil and Cleaning Solutions at SMTA Monterrey
03/27/2025 | KYZEN'KYZEN, the global leader in innovative environmentally friendly cleaning chemistries, will exhibit at the SMTA Monterrey Expo & Tech Forum scheduled to take place on Thursday, April 10 at the Cintermex Convention Center in Monterrey, Nuevo León. KYZEN cleaning experts will be on-site highlighting stencil cleaning chemistries KYZEN E5631J and CYBERSOLV C8882.
Indium to Showcase Proven EV Products and High-Reliability Alloys at Productronica China
03/26/2025 | Indium CorporationAs a global materials supplier and trusted partner in electric vehicle (EV) and e-Mobility manufacturing, Indium Corporation® is proud to showcase its high-reliability alloys and soldering solutions at Productronica China, March 26-28, in Shanghai, China.
SolderKing Enhances Brainboxes' Electronics Manufacturing with Expert Support and Advanced Materials
03/26/2025 | SolderKingIn modern electronics manufacturing, success relies on more than high-quality soldering materials. Technical knowledge and process expertise are just as crucial for achieving consistent results. SolderKing, a leading UK manufacturer, provides both, combining advanced consumables with specialist support to help manufacturers optimise their soldering processes.
AIM to Highlight Type 5 Solder and Other Leading Products at SMTA Monterrey Expo & Tech Forum
03/20/2025 | AIM SolderAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Monterrey Expo & Tech Forum taking place on April 10 at Cintermex in Monterrey, Nuevo Leon, Mexico.
Hentec Industries/RPS Automation to Showcase Valence 2508 at IPC Expo 2025
03/17/2025 | Hentec Industries/RPS AutomationThe Valence 2508 Selective Soldering System is engineered for high-mix, high-volume, advanced PCB production. It supports boards ranging from 25 x 25 mm to 559 x 559 mm (1 x 1 in. to 22 x 22 in.), with a maximum processing area of 508 x 508 mm (20 x 20 in.).