Five IPC APEX EXPO Exhibitors Earn 2019 Innovation Awards
January 11, 2019 | IPCEstimated reading time: 2 minutes
IPC – Association Connecting Electronics Industries has announced the winners of the IPC APEX EXPO 2019 Innovation Awards, a celebration of the innovators and forward thinkers who are changing the technological landscape of the electronics industry.
A panel of industry experts rated and scored each product and assigned a numerical value to each submitted product based on the following criteria: How is this product innovative? How is this product changing the manufacturing industry? What value will customers experience with this new product?
The IPC APEX EXPO Best of Innovation Awards will be presented on Tuesday, January 29 during the opening keynote to the following companies:
- GreenSource Fabrication LLC for their printed circuit board fabrication facility, the only fully automated and "green" PCB fabricator of its kind. All chemicals and water are reclaimed and reused, and the facility’s daily water consumption is 500 gallons regardless of factory load.
- Meyer Burger (Netherlands) BV for an inkjet printer for PCB soldermask. This novel inkjet-printed solder mask solution for PCBs, combines a dedicated production inkjet printing system based on Meyer Burger’s PiXDRO product line, Agfa’s unique DiPaMat solder mask ink, and advanced printing strategies for optimized layer deposition.
- Nordson DAGE for Explorer one, an entry level, operator controlled, manual X-ray inspection (MXI) system for checking manufacturing quality in electronics assemblies. Common manufacturing defects such as open or bridged solder connections, BGA reflow quality and voiding can be checked quickly and easily on a high mix of product types across a PCB.
- Henkel Corporation for its LOCTITE ECCOBOND UF 1173, a novel underfill that can withstand harsh environments and the elevated operating temperatures inherent with smaller, higher-functioning devices. In addition to its performance benefits, the product prioritizes health and safety.
- Vayo (Shanghai) Technology Co., Ltd. for its DFM Expert v5, a unique 3D DFA/DFM solution for electronics manufacturing.
“The IPC APEX EXPO Innovation Awards allow us to celebrate the innovators and forward thinkers who are changing the technological landscape of the electronics industry,” said John Mitchell, IPC president and CEO. “This year, product and service submissions were certainly innovative and the companies did an exceptional job in identifying their product’s unique value in the industry. The innovative submissions directly indicate the strength of the electronics industry and its ability to respond to new challenges resulting from emerging technologies in the electronics marketplace,” Mitchell added.
Members of the award review board include: Dave Geiger, Flex; Don Dupriest, Lockheed Martin Missiles & Fire Control; Carsten Salewski, Viscom Inc.; Martin Goetz, Northrop Grumman Corporation; and Terry Kocour, Lockheed Martin Corporation.
About IPC
IPC is a global industry association based in Bannockburn, Ill., dedicated to the competitive excellence and financial success of its 4,900 member-company sites which represent all facets of the electronics industry, including design, printed board manufacturing, electronics assembly and test. As a member-driven organization and leading source for industry standards, training, market research and public policy advocacy, IPC supports programs to meet the needs of an estimated $2 trillion global electronics industry. IPC maintains additional offices in Taos, N.M.; Washington, D.C.; Atlanta, Ga.; Brussels, Belgium; Stockholm, Sweden; Moscow, Russia; Bangalore and New Delhi, India; Bangkok, Thailand; and Qingdao, Shanghai, Shenzhen, Chengdu, Suzhou and Beijing, China.
Suggested Items
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.
AIM Solder Signs Shinil Fl Ltd. as New Distributor for Korea
05/08/2024 | AIM SolderAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce a new distribution partnership with Shinil Fl Ltd., a prominent supplier of technological solutions in the SMT and semiconductor sectors.
Indium Corporation to Showcase HIA Materials at ECTC
05/07/2024 | Indium CorporationAs an industry leader in innovative materials solutions for semiconductor packaging and assembly, Indium Corporation® will feature its advanced products designed to meet the evolving challenges of heterogeneous integration and assembly (HIA) and fine-pitch system-in-package (SiP) applications at the 74th Electronic Components and Technology Conference (ECTC), May 28‒31, in Denver, Colorado.
Indium Corporation Expert to Present on Pb-Free Solder for Die-Attach in Discrete Power Applications
04/30/2024 | Indium CorporationIndium Corporation Product Manager – Semiconductor Dean Payne will present at the Advanced Packaging for Power Electronics conference, hosted by IMAPS, held May 8-9 in Woburn, Massachusetts, USA.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.