It’s Only Common Sense: Invest in Yourself—You’re Your Most Important Resource
Dan's Biz Bookshelf: 'Revenge of the Tipping Point'
Marcy's Musings: Engineering Economics
Itronics Starts R&D to Recover Tin and Copper from Its “Breakthrough Technology” PCB Refining Pilot Plant
January 16, 2019 | Globe NewswireEstimated reading time: 3 minutes
Itronics Inc., a “Creative Green Technology Company” that produces GOLD’n GRO fertilizers and silver products, has started research and development to recover tin and copper from the silver bullion being produced by its “Breakthrough Technology” Printed Circuit Board Refining Pilot Plant. Tin was on the list of 35 minerals deemed critical to the U.S. National Security and the Economy published by the U.S. Department of Interior on May 18, 2018.
Itronics President, Dr. John Whitney stated, “Our recovery of all of the tin contained on the circuit boards positions the Company to be a world leader in tin recovery from discarded printed circuit boards, a technology advancement of global importance. It also positions Itronics to be the first domestic printed circuit board refiner to recover tin and antimony, making Itronics an emerging domestic “critical minerals” producer.
Itronics had previously announced that its technology recovers all the copper, tin, silver, gold, and palladium (palladium is a Platinum Group Metal, PGM) carried on the discarded circuit boards being refined. The technology also recovers all the antimony, which is a fire-retardant mineral that is used to make the circuit boards fireproof. These metals are contained in the Company’s silver bullion which is sold to a finish refiner for separation and sale.
Itronics has performed laboratory testing which indicates that the copper and tin may be separated from the other metals contained in the bullion. The Company will pursue development of this new metal separation technology. The long-term plan is to become a producer of high purity metals, including the strategic metals tin and antimony, using the Company’s hydrometallurgy and pyrometallurgy technologies. Itronics would benefit if the U.S. decides to provide incentives to increase domestic production of “critical minerals,” including tin, antimony, and palladium.
According to the U.S. Department of Interior, there is no mine production of tin in the United States. All the new tin that is required by the U.S. economy is imported. The most important foreign countries in order of importance that supply tin to the United States are Indonesia, Peru, Malaysia, Bolivia, and Brazil.
The list of critical minerals was published in response to a White House Executive Order issued on December 20, 2017 for the purpose of reducing the United States dependency on imports of critical minerals. Under the Executive Order, a “critical mineral” is defined as “a non-fuel mineral or mineral material that is essential to the economic and national security of the United States, that has a supply chain vulnerable to disruption, and that serves an essential function in the manufacturing of a product, the absence of which would have significant consequences for the economy or national security.”
Itronics is now operating its breakthrough printed circuit board refining technology, which refines circuit boards extracted from e-waste, on a pilot scale at its manufacturing plant in Reno, Nevada. The circuit boards are converted into energy which is used in the refining process, and silver bullion and silver-bearing glass which are sold, thereby eliminating the waste from the environment.
Itronics has pioneered the development of “Zero Waste” material recovery technology that converts liquid photochemical waste into silver bullion and a “non-nutrient metal free” liquid ingredient used to manufacture the line of high quality GOLD’n GRO liquid fertilizers. Dr. Whitney said: “Itronics is now pioneering and has achieved operational proof of concept for its second ‘Zero Waste’ material recovery technology, the breakthrough printed circuit board refining technology which is now being operated at a pilot scale.”
About Itronics
Headquartered in Reno, Nevada, Itronics Inc. is a “Creative Green Technology” Company which produces GOLD’n GRO specialty liquid fertilizers, silver bullion, and silver-bearing glass. The Company’s goal is to achieve profitable green technology driven organic growth in specialty GOLD’n GRO fertilizers, silver, zinc, and minerals. The Company’s technologies maximize the recovery and uses of metals and minerals and by doing this maximize sustainability.
Through its subsidiary, Itronics Metallurgical, Inc., Itronics is the only company with a fully permitted “Beneficial Use Photochemical, Silver, and Water Recycling” plant in the United States that converts 100 percent of the spent photoliquids into GOLD’n GRO liquid fertilizers, silver bullion, and silver bearing glass. This is internationally recognized award winning “Zero Waste” Technology. The Company is developing a portfolio of environmentally beneficial “Zero waste” processing and mining technologies. Itronics has received numerous domestic and international awards that recognize its ability to successfully use chemical science and engineering to create and implement new environmentally green recycling and fertilizer technologies.
Share on:
Suggested Items
Unlocking Advanced Circuitry Through Liquid Metal Ink
10/31/2024 | I-Connect007 Editorial TeamPCB UHDI technologist John Johnson of American Standard Circuits discusses the evolving landscape of electronics manufacturing and the critical role of innovation, specifically liquid metal ink technology, as an alternate process to traditional metallization in PCB fabrication to achieve ever finer features and tighter tolerances. The discussion highlights the benefits of reliability, efficiency, and yields as a tradeoff to any increased cost to run the process. As this technology becomes better understood and accepted, even sought out by customers and designers, John says there is a move toward mainstream incorporation.
Fresh PCB Concepts: The Critical Nature of Copper Thickness on PCBs
10/31/2024 | Team NCAB -- Column: Fresh PCB ConceptsPCBs are the backbone of modern electronics and the copper layers within these boards serve as the primary pathways for electrical signals. When designing and manufacturing PCBs, copper thickness is one of the most critical factors and significantly affects the board’s performance and durability. The IPC-6012F specification, the industry standard for the performance and qualification of rigid PCBs, sets clear guidelines on copper thickness to ensure reliability in different environments and applications.
Book Excerpt: The Printed Circuit Designer’s Guide to... DFM Essentials, Ch. 1
10/25/2024 | I-Connect007The guidelines offered in this book are based on both ASC recommendations and IPC standards with the understanding that some may require adjustment based on the material set, fabricator processes, and other design constraints. This chapter details high-frequency materials, copper foil types, metal core PCBs, and the benefits of embedded capacitance and resistor materials in multilayer PCBs.
The Cost-Benefit Analysis of Direct Metallization
10/21/2024 | Carmichael Gugliotti, MacDermid AlphaCarmichael Gugliotti of MacDermid Alpha discusses the innovative realm of direct metallization technology, its numerous applications, and significant advantages over traditional processes. Carmichael offers an in-depth look at how direct metallization, through developments such as Blackhole and Shadow, is revolutionizing PCB manufacturing by enhancing efficiency, sustainability, and cost-effectiveness. From its origins in the 1980s to its application in cutting-edge, high-density interconnects and its pivotal role in sustainability, this discussion sheds light on how direct metallization shapes the future of PCB manufacturing across various industries, including automotive, consumer electronics, and beyond.
Connect the Dots: Designing for Reality—Pattern Plating
10/16/2024 | Matt Stevenson -- Column: Connect the DotsIn the previous episode of I-Connect007’s On the Line with… podcast, we painted the picture of the outer layer imaging process. Now we are ready for pattern plating, where fabrication can get tricky. The board is now ready to receive the copper traces, pads, and other elements specified in the original CAD design. This article will lay out the pattern plating process and discuss constraints in the chemistries that must be properly managed to meet the customer's exacting manufacturing tolerances.