Tiny Silicon Particles Could Power Lithium Ion Batteries With 10 Times More Capacity
January 17, 2019 | University of AlbertaEstimated reading time: 1 minute

University of Alberta chemists have taken a critical step toward creating a new generation of silicon-based lithium ion batteries with 10 times the charge capacity of current cells.
Image Caption: U of A chemists Jillian Buriak (pictured), Jonathan Veinot and their team found that nano-sized silicon particles overcome a limitation of using silicon in lithium ion batteries. The discovery could lead to a new generation of batteries with 10 times the capacity of current lithium ion batteries. (Photo: John Ulan)
“We wanted to test how different sizes of silicon nanoparticles could affect fracturing inside these batteries,” said Jillian Buriak, a U of A chemist and Canada Research Chair in Nanomaterials for Energy.
Silicon shows promise for building much higher-capacity batteries because it’s abundant and can absorb much more lithium than the graphite used in current lithium ion batteries. The problem is that silicon is prone to fracturing and breaking after numerous charge-and-discharge cycles, because it expands and contracts as it absorbs and releases lithium ions.
Existing research shows that shaping silicon into nano-scale particles, wires or tubes helps prevent it from breaking. What Buriak, fellow U of A chemist Jonathan Veinot and their team wanted to know was what size these structures needed to be to maximize the benefits of silicon while minimizing the drawbacks.
The researchers examined silicon nanoparticles of four different sizes, evenly dispersed within highly conductive graphene aerogels, made of carbon with nanoscopic pores, to compensate for silicon’s low conductivity. They found that the smallest particles—just three billionths of a metre in diameter—showed the best long-term stability after many charging and discharging cycles.
“As the particles get smaller, we found they are better able to manage the strain that occurs as the silicon ‘breathes’ upon alloying and dealloying with lithium, upon cycling,” explained Buriak.
The research has potential applications in “anything that relies upon energy storage using a battery,” said Veinot, who is the director of the ATUMS graduate student training program that partially supported the research.
“Imagine a car having the same size battery as a Tesla that could travel 10 times farther or you charge 10 times less frequently, or the battery is 10 times lighter.”
Veinot said the next steps are to develop a faster, less expensive way to create silicon nanoparticles to make them more accessible for industry and technology developers.
Suggested Items
Kalmar Enhances Electric Fleet Performance with Gen 2 Li-ion Batteries
07/03/2025 | KalmarKalmar has introduced its second-generation lithium-ion (Li-ion) battery solution for its range of electrically powered counter balanced equipment: reachstackers, empty container handlers and forklifts.
UNIST, SK On Strengthen Collaboration to Cultivate Battery Talent and Enhance R&D Capabilities
05/28/2025 | UNISTUNIST announced its plans to deepen collaboration with SK On to foster talent in the battery industry. This strategic partnership aims to attract outstanding researchers, broaden the foundation of research and development, and secure future competitive advantages.
Dymax to Showcase Light-Cure Solutions at The European Battery Show 2025
05/23/2025 | Dymax CorporationDymax, a global manufacturer of rapid light-curing materials and equipment, will exhibit at The European Battery Show 2025 in Stand 4-C60
MVTec Presents Advantages of Machine Vision for Battery Production
05/16/2025 | MVTecMVTec Software GmbH, a leading international manufacturer of machine vision software, will once again demonstrate the added value of machine vision for battery production at this year's Battery Show Europe in Stuttgart.
CEE PCB to Exhibit at The Battery Show Europe 2025
05/14/2025 | CEE PCBTom Yang, CEO of CEE PCB, has announced that the company will exhibit at The Battery Show 2025, held from June 3-5 at the Messe Stuttgart in Stuttgart, Germany, in Booth F69 in Hall 7.