-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueAlternate Metallization Processes
Traditional electroless copper and electroless copper immersion gold have been primary PCB plating methods for decades. But alternative plating metals and processes have been introduced over the past few years as miniaturization and advanced packaging continue to develop.
Technology Roadmaps
In this issue of PCB007 Magazine, we discuss technology roadmaps and what they mean for our businesses, providing context to the all-important question: What is my company’s technology roadmap?
Wet Process Control
In this issue, we examine wet processes and how to obtain a better degree of control that allows usable data to guide our decisions and produce consistently higher-quality products.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
Laser Focus on Flex and Rigid-flex
January 28, 2019 | Barry Matties, I-Connect007Estimated reading time: 7 minutes
ESI’s Chris Ryder, director of Product Management, and Shane Noel, Flex Systems product manager, discuss laser vias for flex users and the increasing necessity for companies to collaborate early on and become more and more involved, whether that be in the product design, or with the process or base material manufacturers.
Barry Matties: First, can you start by telling us a little bit about ESI?
Chris Ryder: ESI is a company with a long tradition in electronics. The company has been around more than 70 years. In the last several decades, we’ve focused on laser-based processes. In particular, we are market leaders in using lasers for flex via drilling and other laser-based processes such as cutting, for example. While we’ve focused primarily on the UV laser regime, we’ve also recently made moves into other laser-based markets like HDI and ICP packaging. Of course, ESI has their foot in semiconductor manufacturing as well. We’re based in Portland, Oregon, but we have a global footprint. Most of our business stems from Asia; primarily China, Korea, Japan, and Taiwan.
Matties: When people design and integrate flex into their devices, what considerations do you think they should have with regard to manufacturing as it comes back into your area?
Shane Noel: The main thing that flex designers typically think about are traces, spaces, and via sizes. The incorporation of flex generally means you’re trying to conserve space, and conserving space requires you to design smaller vias, traces, and spaces. That drives the selection of materials. It’s typically based off polyimide and copper, although we see exotic material sets come into play more and more, especially with the advent of 5G technology. In general, you think of flexibility, of course. That’s important as well as reliability over the long term.
Matties: Do OEMs come to a process team like yours to talk about their flex designs, or do they just leave it up to the fabricator?
Ryder: That’s a good question. What we see is the necessity at this stage of the process for companies like ESI to be more and more involved in the product design. We also see a tighter requirement in terms of design rules between the material manufacturers, board designers, and process manufacturers. There’s a growing need for us to be involved in that discussion.
When you look at the link between the chipset, substrate, interposer, motherboard, and flex elements that go into that total construct, it becomes so dense that you have to imagine a room full of people packed so tightly that everybody has to talk about their intention to move around at every given point in time. That’s where we are in terms of the necessity to coordinate what we’re doing for the success of the actual device.
Matties: We’re talking also rigid-flex here, and you also mentioned the HDI. Are we starting to see HDI flex come to life?
Noel: I would say that’s a true statement. Rigid-flex had explosive growth last year and the year before. Traditionally, a lot of flex has been a connector between either two HDI boards or an HDI board and an antenna. Again, to reduce space consumption and allow for more functionality in a smaller device, you see this incorporation of the rigid and flex together.
Ryder: Chip-on-flex, for example. Instead of using a substrate-based fan-out for your chip, there are efforts to put the chip directly onto the flex in certain applications.
Matties: Where would an OEM go if they are looking to become a user of flex for the first time? What sort of advice would we give to them?
Noel: When we see customers enter the flex regime from either HDI or never having used flex, what they come to ESI for is the expertise on how to process the vias. Through-hole vias are simple; anybody can punch through a piece of material. Meanwhile, blind-hole vias are a little more of an art form. To maintain the reliability of your production floor and have low yield loss, you need to understand the process and understand the laser/material interaction. That’s really where ESI excels. We’ve been doing this for over 20 years and taken pains to understand what is going on when the laser meets the material.
Matties: From a designer’s point of view, you have to think differently.
Ryder: Yes. One of the challenges that we see is that you have material manufacturers with some materials that they’re bringing out for very specific applications such as high-frequency applications. The specifications or capabilities of the material, whether it’s electrical or structural reliability, can match the OEM’s expectation on paper and the data sheet. If you’re designing an antenna and need a certain dielectric constant, it all looks good on a data sheet. The reality is that manufacturing that part could bring some challenges.
Especially with the way we’re going right now towards 5G, we have a host of composite materials. When you add that element to the material (i.e., extra layers of materials with separate a Tg, Dk, filler content, etc.), it adds complication. It brings with it a challenge that you need to address if you really want to have high-yield, high-volume manufacturing. By getting involved with process manufacturers like ESI that do laser-based processes, you help yourself and guarantee the success of high yields, which everybody wants.
We’re a part of the puzzle. The material performances are key to the chipset of the antenna of any other function you have. Again, if you’re working with a subpar yield, it’s not going to help your product be successful. That’s the challenge we have, and that’s where I think the OEM would benefit by including us in the discussion.
Page 1 of 2
Suggested Items
The Cost-Benefit Analysis of Direct Metallization
10/21/2024 | Carmichael Gugliotti, MacDermid AlphaCarmichael Gugliotti of MacDermid Alpha discusses the innovative realm of direct metallization technology, its numerous applications, and significant advantages over traditional processes. Carmichael offers an in-depth look at how direct metallization, through developments such as Blackhole and Shadow, is revolutionizing PCB manufacturing by enhancing efficiency, sustainability, and cost-effectiveness. From its origins in the 1980s to its application in cutting-edge, high-density interconnects and its pivotal role in sustainability, this discussion sheds light on how direct metallization shapes the future of PCB manufacturing across various industries, including automotive, consumer electronics, and beyond.
Connect the Dots: Designing for Reality—Pattern Plating
10/16/2024 | Matt Stevenson -- Column: Connect the DotsIn the previous episode of I-Connect007’s On the Line with… podcast, we painted the picture of the outer layer imaging process. Now we are ready for pattern plating, where fabrication can get tricky. The board is now ready to receive the copper traces, pads, and other elements specified in the original CAD design. This article will lay out the pattern plating process and discuss constraints in the chemistries that must be properly managed to meet the customer's exacting manufacturing tolerances.
PCB007 Magazine October 2024: Alternate Metallization Processes
10/16/2024 | I-Connect007 Editorial TeamTraditional electroless copper and electroless copper immersion gold have been primary PCB plating methods for decades. But alternative plating metals and processes have been introduced over the past few years as miniaturization and advanced packaging continue to develop taking us into new directions. In this issue of PCB007 Magazine, we examine the impact of alternate metallization methods giving a glimpse into how and when we will arrive at 'destination metallization'.
Partial HDI: A Complete Solution
10/10/2024 | I-Connect007 Editorial TeamWe recently spoke with IPC instructor Kris Moyer about partial HDI, a process that’s recently been growing in popularity. Partial HDI allows designers to escape route out from tight-pitch BGAs on one layer, where a mechanically drilled plated through-hole is not an option, while avoiding the complexity and expense of sequential lamination cycles. As Kris explains, this process doesn’t add much to the cost, and it’s fairly straightforward. But there are some competing signal integrity and fabrication requirements to contend with. We asked Kris to walk us through this process.
Trouble in Your Tank: Interconnect Defect—The Three Degrees of Separation
10/01/2024 | Michael Carano -- Column: Trouble in Your TankIt has been well documented that, with a very expensive and complex printed circuit board, thermal and mechanical excursions often find weaknesses. A lack of robustness and poor process control often leads to the exploitation of those weaknesses. An interconnect defect (ICD) often goes undetected until the printed circuit board reaches the final assembly stage or undergoes multiple thermal cycles, including interconnect stress tests or thermal shock. It is impossible to rework the ICD defect. But unlike voids, if detected in time, the panels can be reprocessed.