Knocking Down the Bone Pile: Revamp Your Components with BGA Reballing
Global Sourcing Spotlight: Balancing Speed and Flexibility Without Sacrificing Control
SMT Perspectives & Prospects: Artificial Intelligence Part 6: Data Module 1
AIM Introduces New CX18 and RX18 No Clean Cored Wire Solder
February 13, 2019 | AIM SolderEstimated reading time: 1 minute
AIM Solder has announce the introduction of CX18 and RX18 no clean cored wire solders, designed to offer excellent soldering results with all lead-free alloys and on all surface finishes.
Engineered for high operator satisfaction, CX18 is a low odor/smoke formula which promotes thermal transfer and fast wetting without the need for additional flux. RX18 was developed for automated soldering and provides rapid solder penetration into plated through holes or surface mount interconnections and its specialized packaging ensures consistent, accurate, jam-free wire feeding. Leaving minimal, clear post solder residues, these products pass J-STD-004A and J-STD-004B SIR and corrosion requirements and do not require cleaning.
Additionally, RX18 was awarded Circuits Assembly’s 2019 New Product Introduction (NPI) Award during the IPC Apex Expo. Selected by an independent panel of industry experts, the winners were selected based on creativity & innovation, compatibility with existing technology, cost effectiveness, expected reliability, performance, and more.
This recognition confirms AIM’s commitment to developing state-of-the-art products to address current industry needs as well as emerging technologies.
About AIM
Headquartered in Montreal, Canada, AIM Solder is a leading global manufacturer of assembly materials for the electronics industry with manufacturing, distribution and support facilities located throughout the world. AIM produces advanced solder products such as solder paste, liquid flux, cored wire, bar solder, epoxies, lead-free and halogen-free solder products, and specialty alloys such as indium and gold for a broad range of industries. A recipient of many prestigious SMT industry awards, AIM is strongly committed to innovative research and development of product and process improvement as well as providing customers with superior technical support, service and training.
Share on:
Testimonial
"Your magazines are a great platform for people to exchange knowledge. Thank you for the work that you do."
Simon Khesin - Schmoll MaschinenSuggested Items
Rehm Wins Mexico Technology Award for CondensoXLine with Formic Acid
10/17/2025 | Rehm Thermal SystemsModern electronics manufacturing requires technologies with high reliability. By using formic acid in convection, condensation, and contact soldering, Rehm Thermal Systems’ equipment ensures reliable, void-free solder joints — even when using flux-free solder pastes.
Indium Experts to Deliver Technical Presentations at SMTA International
10/14/2025 | Indium CorporationAs one of the leading materials providers to the power electronics assembly industry, Indium Corporation experts will share their technical insight on a wide range of innovative solder solutions at SMTA International (SMTAI), to be held October 19-23 in Rosemont, Illinois.
Knocking Down the Bone Pile: Revamp Your Components with BGA Reballing
10/14/2025 | Nash Bell -- Column: Knocking Down the Bone PileBall grid array (BGA) components evolved from pin grid array (PGA) devices, carrying over many of the same electrical benefits while introducing a more compact and efficient interconnect format. Instead of discrete leads, BGAs rely on solder balls on the underside of the package to connect to the PCB. In some advanced designs, solder balls are on both the PCB and the BGA package. In stacked configurations, such as package-on-package (PoP), these solder balls also interconnect multiple packages, enabling higher functionality in a smaller footprint.
Indium to Showcase High-Reliability Solder and Flux-Cored Wire Solutions at SMTA International
10/09/2025 | Indium CorporationAs one of the leading materials providers in the electronics industry, Indium Corporation® will feature its innovative, high-reliability solder and flux-cored wire products at SMTA International (SMTAI), to be held October 19-23 in Rosemont, Illinois.
‘Create your Connections’ – Rehm at productronica 2025 in Munich
10/08/2025 | Rehm Thermal SystemsThe electronics industry is undergoing dynamic transformation: smart production lines, sustainability, artificial intelligence, and sensor technologies dominate current discussions.