Driving Innovation: Mechanical and Optical Processes During Rigid-flex Production
It’s Only Common Sense: Your Biggest Competitor Is Complacency
The Chemical Connection: Onshoring PCB Production—Daunting but Certainly Possible
Number of 300mm IC Wafer Fabs Expected to Reach 121 in 2019
March 18, 2019 | IC InsightsEstimated reading time: 1 minute
IC Insights recently released its Global Wafer Capacity 2019-2023 report that provides in-depth analyses and forecasts of IC industry capacity by wafer size, by process geometry, by region, and by product type through 2023. The newest edition of the Global Wafer Capacity report shows that 300mm wafers took over as the industry’s primary wafer size in terms of total surface area used in 2008. Furthermore, the number of 300mm wafer fabrication facilities in operation continues to increase. With nine new 300mm wafer fabs scheduled to open in 2019, the worldwide number of operational 300mm wafer fabs is expected to climb to 121 this year and grow to a total of 138 fabs at the end of the forecast period.
Some highlights regarding 300mm wafer fabs are shown below:
- At the end of 2018, there were 112 production-class IC fabs utilizing 300mm wafers (there are R&D fabs and several high-volume fabs around the globe that make “non-IC” products using 300mm wafers, but these are not included in the count).
- There are nine 300mm wafer fabs scheduled to open in 2019 (five of them located in China) following seven that opened in 2018. Nine new fabs in 2019 would be the most opened in a single year since 12 were opened in 2007. Another six are scheduled to open in 2020. All of the new fabs coming in 2019 and 2020 will be for DRAM and flash memory or for foundry capacity.
- The number of active volume-production 300mm fabs declined for the first time in 2013 when ProMOS closed two large fabs and two other fabs that were scheduled to open in 2013 where delayed until 2014. The quantity of 300mm fabs has risen every year since.
- By the end of 2023 there are expected to be 26 more fabs in operation than in 2018, bringing the total number of 300mm fabs used for IC production to 138. For comparison, at the end of 2018 there were 150 volume-production 200mm wafer fabs in operation (the peak number of 200mm fabs was 210).
Share on:
Testimonial
"Our marketing partnership with I-Connect007 is already delivering. Just a day after our press release went live, we received a direct inquiry about our updated products!"
Rachael Temple - AlltematedSuggested Items
Unlocking the Promise of AI in Electronics Manufacturing
10/29/2025 | Shobhit Agrawal, Keysight TechnologiesThe electronics manufacturing industry is rapidly evolving as more complicated products are introduced in the production lines, which require technological advancements even in the production processes. The requirements for production that is efficient, product quality that is greater, and product life cycles that are shorter are more crucial than ever before. In the electronic device life cycle, from design to maintenance, test phases have a significant impact on the economy of the company. Test processes are closely linked to the production volume and impacted by the complexity of the product. For businesses to maintain their competitive edge, they need to adopt innovative solutions and redefine processes.
Driving Innovation: Mechanical and Optical Processes During Rigid-flex Production
10/28/2025 | Kurt Palmer -- Column: Driving InnovationRigid-flex printed circuit boards are a highly effective solution for placing complex circuitry in tight, three-dimensional spaces. They are now indispensable across a range of industries, from medical devices and aerospace to advanced consumer electronics, helping designers make the most efficient use of available space. However, their unique construction—combining rigid and flexible materials—presents a fundamental challenge for PCB manufacturers.
TSMC Fast-Tracks Advanced Chip Technology at Arizona Plant Amid Rising AI Demand
10/27/2025 | I-Connect007 Editorial TeamTSMC said earlier this month that it’s speeding up the rollout of its most advanced chip technology in the US because of rising AI product demand and Intel’s growing competition, The Register reported.
SMTAI 2025 Review: Reflecting on a Pragmatic and Forward-looking Industry
10/27/2025 | Marcy LaRont, I-Connect007Leaving the show floor on the final afternoon of SMTA International last week in Rosemont, Illinois, it was clear that the show remains a grounded, technically driven event that delivers a solid program, good networking, and an easy space to commune with industry colleagues and meet with customers.
Simplifying Software Integration for Every Factory
10/22/2025 | Nolan Johnson, SMT007 MagazineAs a leading provider of factory digitalization solutions for electronics manufacturers, Cogiscan is at the heart of the software integration process. Davina McDonnell, director of marketing and product management, discusses how Cogiscan ensures that customers are ready to integrate and what it looks for to ensure a quick and appropriate installation.