Rogers Introduces New Waterproof Flexible Heater Substrate
March 21, 2019 | Rogers CorporationEstimated reading time: 2 minutes
Rogers Corporation is pleased to introduce ARLON® water-resistant substrate for flexible (“flex”) heater applications. Available for use in a vast range of industries, the new substrate is designed to improve performance and reliability of both etched-foil and wire-wound flex heaters, particularly those operating in high moisture or underwater environments.
Instead of the fiberglass fabric typically used in flex-heater substrates, Rogers’ new ARLON® 34C36 water-resistant substrate combines high performance silicone with layers of Rogers’ own DeWAL® Polytetrafluoroethylene (PTFE) film. As PTFE is hydrophobic and will not wick water, the new substrate remains robust and durable in wet environments. Fiberglass fabric, on the other hand, is hydrophilic and wicks water, allowing moisture to seep into the heater through exposed fibers. Flexible heaters made of the new ARLON substrate will function better in wet environments that could, otherwise, be at risk of inefficient heating or mechanical failure.
ARLON 34C36 waterproof flex-heater substrate combines the PTFE film with uncured silicone on one side, and cured silicone on the other. The substrate is available in both 20 mil (.508 mm) and 30 mil (.762 mm) thicknesses. As with all ARLON flex-heater substrates, the new substrate is Underwriters Laboratory (UL) recognized for relative thermal index (RTI) ratings up to 220ºC (428°F), flammability ratings for horizontal burn (UL94 HB), and the highest resistance to vertical burn (UL94 V-0) for electrical insulation of flexible heaters.
Rogers offers a full line of ARLON silicone rubber / fiberglass fabric flex-heater substrates. These composites operate reliably and offer long service life under most environmental conditions. ARLON offerings are also available with pre-bonded resistive foils, such as Alloy 600 and stainless steel, to eliminate the initial bonding step from the flexible heater manufacturers’ process. Utilizing pre-bonded resistive foils also enables the flexible heater manufacturer to process the material in continuous roll-to-roll rather than piece-by-piece to realize reduced costs.
“We’re proud to introduce a waterproof option to our portfolio of high-performance flex-heater substrates,” states Tim Wilson, Rogers’ Market Segment Manager for ARLON products. “By combining the hydrophobic properties of PTFE with the robust properties of ARLON® silicone rubber, the new substrates deliver a new standard in reliability and moisture resistance.”
Click here for more information on ARLON substrates. For more information on the Rogers family of elastomeric material solutions, rogerscorp.com/ems.
About Rogers Corporation
Rogers Corporation is a global leader in engineered materials to power, protect, and connect our world. With more than 180 years of materials science experience, Rogers delivers high-performance solutions that enable clean energy, internet connectivity, and safety and protection applications, as well as other technologies where reliability is critical. Rogers delivers Power Electronics Solutions for energy-efficient motor drives, vehicle electrification and alternative energy; Elastomeric Material Solutions for sealing, vibration management and impact protection in mobile devices, transportation interiors, industrial equipment and performance apparel; and Advanced Connectivity Solutions for wireless infrastructure, automotive safety and radar systems. Headquartered in Arizona (USA), Rogers operates manufacturing facilities in the United States, China, Germany, Belgium, Hungary, and South Korea, with joint ventures and sales offices worldwide.
Suggested Items
All Flex Solutions Hires Mike Madetzke as Manager of R&D
05/08/2024 | All Flex SolutionsAll Flex Solutions is very pleased to announce that Mike Madetzke has joined their team as their new Manager of Research and Development.
Merlin Flex invests in New Schmoll Direct Imaging System
04/30/2024 | Merlin Flex LtdMerlin Flex has fully installed and commissioned its 2nd Schmoll MDI Direct Imaging system. This new machine includes a twin bed, 4 head system which enhances Merlin Flex’s direct imaging capability for its 1.4M long flexible circuits.
Warm Windows and Streamlined Skin Patches – IDTechEx Explores Flexible and Printed Electronics
04/26/2024 | IDTechExFlexible and printed electronics can be integrated into cars and homes to create modern aesthetics that are beneficial and easy to use. From luminous car controls to food labels that communicate the quality of food, the uses of this technology are endless and can upgrade many areas of everyday life.
Trackwise Awarded Prestigious King’s Award for Enterprise for Innovation
04/24/2024 | TrackwiseTrackwise Designs plc, the innovative manufacturer of specialist products using printed circuit technology, is delighted to be recognised with a prestigious King’s Award for Enterprise. Announced, Friday 21 April, Trackwise has been recognised for its excellence in Innovation for its length-unlimited, multilayer flexible printed circuits.
IDTechEx Discusses the Role of Printed Sensors in Mass-Digitization
04/11/2024 | PRNewswireIntegrated sensors digitizing physical interactions are vital in everyday life. From personalized user experiences to warehouse inventory management, data-driven insights are driving demand for smarter sensors — and lots of them.