The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
GOEPEL to Hold Webinar on Flexibility in the Manufacturing Process
April 15, 2019 | GOEPEL ElectronicEstimated reading time: 1 minute
GOEPEL electronic will be conducting a free webinar, “Flexibility in the Manufacturing Process—Reliable Automatic Optical Inspection of Selective Solder Joints” on Monday, April 29th at 10am CDT, 3pm UTC, 5pm MESZ.
This webinar will be an overview of the integration of camera modules for 2D and 3D selective solder joint inspection into different production environments. During the presentation attendees will learn more about the requirements for such integration solutions and how the technical details of the hardware and software of the camera modules are derived from them. In addition, the concepts for connecting the inspection solution to company-internal MES or traceability systems will be discussed.
Key Facts:
- How can selective solder joints be inspected optically automatically and reliably?
- Which technologies are used in the flexible 2D/3D camera modules for selective solder joint inspection?
- Which possibilities of system integration do the camera modules offer for selective solder joint inspection?
- Which additional tools are available for verification or MES connection?
Who should attend:
- Quality managers and production managers for electronic assemblies
- Technologists, production planners
- Managing director of small and medium-sized manufacturing companies
To register, visit GOEPEL electronic’s Flexibility in the Manufacturing Process event page.
About GOEPEL electronic
GOEPEL electronic is a leading provider of innovative test and inspection solutions for printed circuit board assemblies (PCBAs) and electronic devices and systems. The company is divided into four divisions: Automotive Test Solutions, Embedded JTAG Solutions, Industrial Function Test and Inspection Solutions (AOI·AXI·SPI·IVS). Besides more than 240 employees, who work in the company’s headquarters in Jena/Germany, GOEPEL electronic runs several support and service offices in the UK, USA, India and China. A worldwide distribution ensures the local and on-site support of GOEPEL electronic’s products and solutions.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.