Tiny, Fast, Accurate Technology on the Radar
April 18, 2019 | KAUSTEstimated reading time: 2 minutes

Radar technology has been used for decades in aviation, defense and speed-camera technology. Now, a team at KAUST, in collaboration with scientists at the VTT Technical Research Center of Finland, have created a compact, low-cost radar with potential applications in healthcare and personal security.
Radar provides detailed information about the size, distance and speed of moving objects. However, for close-range applications, the transmitted radio waves must have short wavelengths to pick up as much detail as possible about its immediate environment. Such sensors could help visually impaired people, and unmanned moving devices, to see by translating radar reflections into useful information.
“Current radar modules are large and bulky. They also lose out on key details because they operate using long radio wavelengths,” says Seifallah Jardak , who worked on the project under the supervision of Sajid Ahmed and Mohamed-Slim Alouini from KAUST and along with Tero Kiuru and Mikko Metso from VTT. “We wanted to develop a low-power, portable radar. Colleagues at VTT brought the necessary experience in millimeter-wave and hardware design, while I focused on the signal processing side and developed modular radar software,” explains Jardak.
The earliest prototype performed a single scan every two seconds, making it difficult to acquire enough input data. Jardak optimized the signal processing modules and improved the performance to eight scans per second, providing better real-time monitoring.
The device design incorporates a frequency-modulated continuous wave (FMCW) radar. This means the radar produces continuous pulses of millimeter-wavelength radio waves which have a frequency that varies during each pulse. The small wavelength means that the time taken for pulses to reach an object and reflect back, and therefore the distance to the object, are calculated accurately.“To limit the size of our system, we chose an operating frequency of 24 Gigahertz. This enabled us to reduce the size of the microstrip antenna,” says Jardak. “Our design also has one transmitting and two receiving antennae, meaning it can better estimate the angular location of a target.”
The device fits into a 10-centimeter box, weighs less than 150 grams and is powered by a 5V battery. Initial trials suggest the device is capable of target detection, speed estimation and tracking at ranges of up to 12 meters. The team even used it to detect whether a person was breathing when sitting in a chair.
“Our prototype may also be useful for unmanned robotic and quadcopter applications where a collision avoidance system is required,” adds Jardak.
Suggested Items
DownStream Acquisition Fits Siemens’ ‘Left-Shift’ Model
06/26/2025 | Andy Shaughnessy, I-Connect007I recently spoke to DownStream Technologies founder Joe Clark about the company’s acquisition by Siemens. We were later joined by A.J. Incorvaia, Siemens’ senior VP of electronic board systems. Joe discussed how he, Rick Almeida, and Ken Tepper launched the company in the months after 9/11 and how the acquisition came about. A.J. provides some background on the acquisition and explains why the companies’ tools are complementary.
Elementary Mr. Watson: Retro Routers vs. Modern Boards—The Silent Struggle on Your Screen
06/26/2025 | John Watson -- Column: Elementary, Mr. WatsonThere's a story about a young woman preparing a holiday ham. Before putting it in the pan, she cuts off the ends. When asked why, she shrugs and says, "That's how my mom always did it." She asks her mother, who gives the same answer. Eventually, the question reaches Grandma, who laughs and says, "Oh, I only cut the ends off because my pan was too small." This story is a powerful analogy for how many PCB designers approach routing today.
Connect the Dots: The Future of PCB Design and Manufacturing
07/02/2025 | Matt Stevenson -- Column: Connect the DotsFor some time, I have been discussing the increasing complexity of PCBs and how designers can address the constantly evolving design requirements associated with them. My book, "The Printed Circuit Designer’s Guide to… Designing for Reality," details best practices for creating manufacturable boards in a modern production environment.
Siemens Turbocharges Semiconductor and PCB Design Portfolio with Generative and Agentic AI
06/24/2025 | SiemensAt the 2025 Design Automation Conference, Siemens Digital Industries Software today unveiled its AI-enhanced toolset for the EDA design flow.
Cadence AI Autorouter May Transform the Landscape
06/19/2025 | Andy Shaughnessy, Design007 MagazinePatrick Davis, product management director with Cadence Design Systems, discusses advancements in autorouting technology, including AI. He emphasizes a holistic approach that enhances placement and power distribution before routing. He points out that younger engineers seem more likely to embrace autorouting, while the veteran designers are still wary of giving up too much control. Will AI help autorouters finally gain industry-wide acceptance?