Beyond the Board: What Companies Need to Know Before Entering the MilAero PCB Market
Defense Speak Interpreted: If CHIPS Cuts Back, What Happens to Electronics Packaging Funds?
American Made Advocacy: Where’s the Budget for a Modern Military Run on Microelectronics?
Aismalibar to Exhibit at 2019 Thermal Materials Summit
April 29, 2019 | AismalibarEstimated reading time: 2 minutes
Aismalibar has announced their first exhibition at this year’s Thermal Materials Summit in Los Angeles, California on May 2, 2019. The Thermal Materials Summit educates attendees on the latest advancements in thermal interface materials for professionals working in markets such as: aerospace, electronics packaging, automotive, semiconductor/ICs, LED cooling, motor controls, power supplies, discrete electronic devices, telecom and batteries.
Aismalibar will be showcasing the following products:
Cobritherm
Cobrithem insulate metal substrates are produced with different thicknesses of aluminum and copper and can be clad with different mixtures of dielectric layers to meet the ever-changing demands of the industry. The material can be produced in a variety of styles ranging from very thin layers as small as 50 microns to grant an excellent thermal impedance and up to 130 microns, which allows it to withstand high insulation in between the conductive metal layer.
Cobritherm Ultrathin
Cobritherm Ultrathin integrates an innovative ultra-thin dielectric layer that provides higher thermal performance, excellent working temperature and reduces thermal resistance. The new Cobritherm Ultra Thin 4W features a Tg of 180ºC and an 150ºC MOT. Corbritherm Ultrathin offers industry leading thermal conductivity, strong MOT values, high Tg and low CTE which are the key elements for performance of MPCBs operating at high temperatures.
Fastherm
Fastherm is a unique product developed to achieve a faster thermal transition from the LED thermal pad to the heat sink through a pedestal technology. This superior thermal transition can be achieved by using the entire Cobritherm HTC product range with using a copper base. By using Aismalibar Cobritherm HTC range together with Fastherm technology, LEDs operate at a temperature 30ºC to 50ºC lower due to the direct thermal transition (pedestal) from the thermal pad to the heat sink.
Flextherm
Flextherm is a high technology thermal IMS for use in the production of conformable metal printed circuit boards that can be bent without compromising the initial dielectric strength between conductive layers. Its low thermal impedance allows the dissipation of temperature from the heating elements of a PCB into Flextherm’s metal core at an extremely efficient rate.
Multi-Layer PCBS
As thermal management becomes more challenging on multilayer PCBs constructions, Aismalibar has developed different substrates that can be combined to offer tailored solutions. These substrates are required in the case of complex boards with denser circuitry.
About Aismalibar
Founded in 1934 and based in Barcelona, Spain, Aismalibar manufactures high end copper and metal clad laminates for the printed circuit board industry. Aismalibar’s expertise lies in offering the best solutions to reduce the operational temperature of the printed circuit boards. Aismalibar materials ensure quality and reliability of all the products that incorporate them. Aismalibar has implemented a 100% proof test with 1-3KV (High Pot Test) to every Corbritherm IMS laminate that is produced. These materials minimize the use of supplementary fans or heat sinks, thus reducing production costs. Aismalibar now operates globally through several subsidiaries. Our priorities are, and have always been technological innovation and customer satisfaction.
Share on:
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
Trouble in Your Tank: Implementing Direct Metallization in Advanced Substrate Packaging
09/15/2025 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite are gaining popularity throughout the world. The environmental and productivity gains achievable with this process are outstanding. Direct metallization reduces the costs of compliance, waste treatment, and legal issues related to chemical exposure. A graphite-based direct plate system has been devised to address these needs.
Closing the Loop on PCB Etching Waste
09/09/2025 | Shawn Stone, IECAs the PCB industry continues its push toward greener, more cost-efficient operations, Sigma Engineering’s Mecer System offers a comprehensive solution to two of the industry’s most persistent pain points: etchant consumption and rinse water waste. Designed as a modular, fully automated platform, the Mecer System regenerates spent copper etchants—both alkaline and acidic—and simultaneously recycles rinse water, transforming a traditionally linear chemical process into a closed-loop system.
Driving Innovation: Depth Routing Processes—Achieving Unparalleled Precision in Complex PCBs
09/08/2025 | Kurt Palmer -- Column: Driving InnovationIn PCB manufacturing, the demand for increasingly complex and miniaturized designs continually pushes the boundaries of traditional fabrication methods, including depth routing. Success in these applications demands not only on robust machinery but also sophisticated control functions. PCB manufacturers rely on advanced machine features and process methodologies to meet their precise depth routing goals. Here, I’ll explore some crucial functions that empower manufacturers to master complex depth routing challenges.
Trouble in Your Tank: Minimizing Small-via Defects for High-reliability PCBs
08/27/2025 | Michael Carano -- Column: Trouble in Your TankTo quote the comedian Stephen Wright, “If at first you don’t succeed, then skydiving is not for you.” That can be the battle cry when you find that only small-diameter vias are exhibiting voids. Why are small holes more prone to voids than larger vias when processed through electroless copper? There are several reasons.
The Government Circuit: Navigating New Trade Headwinds and New Partnerships
08/25/2025 | Chris Mitchell -- Column: The Government CircuitAs global trade winds continue to howl, the electronics manufacturing industry finds itself at a critical juncture. After months of warnings, the U.S. Government has implemented a broad array of tariff increases, with fresh duties hitting copper-based products, semiconductors, and imports from many nations. On the positive side, tentative trade agreements with Europe, China, Japan, and other nations are providing at least some clarity and counterbalance.