Dan’s Biz Bookshelf: ‘Dream First, Details Later
Happy’s Tech Talk #40: Factors in PTH Reliability—Hole Voids
Facing the Future: Time for Real Talk, Early and Often, Between Design and Fabrication
XNC Format: Gerber Takes Data Into the Future
May 20, 2019 | Denis Morin, Karel Tavernier, Jean-Pierre Charras, and Marius MatiocEstimated reading time: 2 minutes
Gerber is the world’s favourite data exchange format for PCB image data: it’s easy to use, crystal clear, and gives designers and engineers an unequivocal language with which to communicate with each other. And this grand old man of the PCB industry has remained at the forefront, powered by ongoing developments that add capability and functionality without ever compromising its characteristic simplicity and ease of use.
It’s the ideal solution for transferring drill data too, as can be seen from scanning the specification. And many in the PCB industry use it for just this, but the majority are still transferring their routing and drilling coordinates using NC formats. These were never designed for data transfer, and more often than not create confusion and waste time.
Some argue that Gerber files, unlike NC files, can’t be sent to a drilling machine. True enough, but PCB manufacturers never send their clients’ incoming files to their machines anyway. Instead, the data goes through the CAM process and is then altered and output as is appropriate to the manufacturer’s specific production line. For CAD, the question should not be which format is best for the machines, but rather which format is best for input into CAM. As we’ve said, this is undoubtedly Gerber.
So, why are CAD developers and their users still stuck on NC formats? It’s most likely a question of inertia or tradition. Drill information has been transferred for decades using NC formats, principally Excellon (hence the generic use of the name “Excellon” for “NC files”), that are similar to the 1985 IPC-NC349 specification. Also, there’s still a lot of legacy software out there, so NC files will likely be with us for a while.
The Problem With Existing NC Specifications
The problem is that so many NC files are of deplorable quality because the NC format was never designed as a data transfer format. It has always been a machine driver and contains all sorts of information that a drilling machine needs, but that is irrelevant and confusing for data exchange. For example, CAD software will typically ask users to specify whether routing should be achieved using nibbling or slot creation and which drill feeds and speeds are to be used. These are decisions that only the fabricator can make, and yet many CAD professionals will feel duty bound to give some sort of answer, which will inevitably be wrong.
To read this entire article, which appeared in the April 2019 issue of Design007 Magazine, click here.
Share on:
Suggested Items
Seeing a Future in Mexico
07/09/2025 | Michelle Te, I-Connect007The Global Electronics Association (formerly known as IPC) has been instrumental in fostering a partnership with Guanajuato, a state north of Mexico City with 12 industrial clusters and close to 150 companies involved in electronics. This past spring, Alejandro Hernández, the undersecretary for investment promotion in Guanajuato, attended IPC APEX EXPO 2025 at the invitation of IPC Mexico Director Lorena Villanueva, where he met with several companies to discuss the opportunities available in Mexico. He is inviting electronics-related companies seeking long-term investment in a centrally located area with access to highways, railways, and ports.
The Global Electronics Association Releases IPC-8911: First-Ever Conductive Yarn Standard for E-Textile Application
07/02/2025 | Global Electronics AssociationThe Global Electronics Association announces the release of IPC-8911, Requirements for Conductive Yarns for E-Textiles Applications. This first-of-its-kind global standard establishes a clear framework for classifying, designating, and qualifying conductive yarns—helping to address longstanding challenges in supply chain communication, product testing, and material selection within the growing e-textiles industry.
IPC-CFX, 2.0: How to Use the QPL Effectively
07/02/2025 | Chris Jorgensen, Global Electronics AssociationIn part one of this series, we discussed the new features in CFX Version 2.0 and their implications for improved inter-machine communication. But what about bringing this new functionality to the shop floor? The IPC-CFX-2591 QPL is a powerful technical resource for manufacturers seeking CFX-enabled equipment. The Qualified Product List (QPL) helps streamline equipment selection by listing models verified for CFX compliance through a robust third-party virtual qualification process.
The Knowledge Base: A Conference for Cleaning and Coating of Mission-critical Electronics
07/08/2025 | Mike Konrad -- Column: The Knowledge BaseIn electronics manufacturing, there’s a dangerous misconception that cleaning and coating are standalone options, that they operate in different lanes, and that one can compensate for the other. Let’s clear that up now. Cleaning and conformal coating are not separate decisions. They are two chapters in the same story—the story of reliability.
Advancing Aerospace Excellence: Emerald’s Medford Team Earns Space Addendum Certification
06/30/2025 | Emerald TechnologiesWe’re thrilled to announce a major achievement from our Medford, Oregon facility. Andy Abrigo has officially earned her credentials as a Certified IPC Trainer (CIT) under the IPC J-STD-001 Space Addendum, the leading industry standard for space and military-grade electronics manufacturing.