Knocking Down the Bone Pile: Gold Mitigation for Class 2 Electronics
Punching Out: Your Financial Preparation for a Sale
Nolan's Notes: The Next Killer App in Component Manufacturing
XNC Format: Gerber Takes Data Into the Future
May 20, 2019 | Denis Morin, Karel Tavernier, Jean-Pierre Charras, and Marius MatiocEstimated reading time: 2 minutes
Gerber is the world’s favourite data exchange format for PCB image data: it’s easy to use, crystal clear, and gives designers and engineers an unequivocal language with which to communicate with each other. And this grand old man of the PCB industry has remained at the forefront, powered by ongoing developments that add capability and functionality without ever compromising its characteristic simplicity and ease of use.
It’s the ideal solution for transferring drill data too, as can be seen from scanning the specification. And many in the PCB industry use it for just this, but the majority are still transferring their routing and drilling coordinates using NC formats. These were never designed for data transfer, and more often than not create confusion and waste time.
Some argue that Gerber files, unlike NC files, can’t be sent to a drilling machine. True enough, but PCB manufacturers never send their clients’ incoming files to their machines anyway. Instead, the data goes through the CAM process and is then altered and output as is appropriate to the manufacturer’s specific production line. For CAD, the question should not be which format is best for the machines, but rather which format is best for input into CAM. As we’ve said, this is undoubtedly Gerber.
So, why are CAD developers and their users still stuck on NC formats? It’s most likely a question of inertia or tradition. Drill information has been transferred for decades using NC formats, principally Excellon (hence the generic use of the name “Excellon” for “NC files”), that are similar to the 1985 IPC-NC349 specification. Also, there’s still a lot of legacy software out there, so NC files will likely be with us for a while.
The Problem With Existing NC Specifications
The problem is that so many NC files are of deplorable quality because the NC format was never designed as a data transfer format. It has always been a machine driver and contains all sorts of information that a drilling machine needs, but that is irrelevant and confusing for data exchange. For example, CAD software will typically ask users to specify whether routing should be achieved using nibbling or slot creation and which drill feeds and speeds are to be used. These are decisions that only the fabricator can make, and yet many CAD professionals will feel duty bound to give some sort of answer, which will inevitably be wrong.
To read this entire article, which appeared in the April 2019 issue of Design007 Magazine, click here.
Share on:
Suggested Items
Hunting for Clues: Feng Xue Solving Circuit Board 'Crimes' With AOI Standard
05/08/2025 | Linda Stepanich, IPCWhen residents in sleepy English villages needed a top-tier detective to solve a murder, they called on Belgian super-sleuth Hercule Poirot, author Agatha Christie’s fictional detective famous for using his “little grey cells” to solve crimes. In the same way, IPC standards development committees, when creating a standard to detect defects in circuit boards using Automated Optical Inspection (AOI), call on IPC A-Team, Hercule.
IPC Strengthens Global Focus with Promotion of Sanjay Huprikar to Chief Global Officer
05/08/2025 | IPCIPC, the global electronics association, announces the promotion of Sanjay Huprikar to chief global officer. This newly created position reflects the association’s forward-looking strategy and industry needs to strengthen the electronics supply chain.
Navigating Global Manufacturing in an Era of Uncertainty
05/07/2025 | Philip Stoten, ScoopThe EMS industry faces unprecedented challenges as global trade tensions rise and tariff announcements create market uncertainty. In an overview of IPC Europe’s podcast, MADE IN EUROPE, industry experts from GPV and Zollner examine how these developments impact our businesses and customers, and what strategies will prevail in this new landscape.
Nick Koop Launches IPC Flex Design Class
05/06/2025 | Andy Shaughnessy, Design007 MagazineNick Koop is director of flex technology for TTM Technologies, and he’s been a staple of IPC’s flex committees for decades. He’s also a longtime flex design instructor, and he’s about to debut a new IPC class, Flex and Rigid-Flex Design for Manufacturability, which will run May 12–21. In this interview, Nick tells us about this new class and what attendees can expect to learn.
The Government Circuit: Trump’s Trade War Disrupts the Electronics Ecosystem
05/06/2025 | Chris Mitchell -- Column: The Government CircuitThere is certainly no shortage of work to be done in the IPC Government Relations department, as the U.S. waged a tariff campaign on practically every industrial country in the world and several countries embarked on high-tech initiatives with a mix of approaches to the crucial foundations of electronics manufacturing. Indeed, the breadth and speed of U.S. President Donald Trump’s tariff campaign continues to be a serious challenge for our industry.