The Right Approach: Get Ready for ISO 9001 Version 6
Dan’s Biz Bookshelf: ‘Still Broke: Walmart’s Remarkable Transformation'
Driving Innovation: Depth Routing Processes—Achieving Unparalleled Precision in Complex PCBs
MOEA Minister Visits Unimicron to Witness PCB Industry 4.0
June 27, 2019 | Unimicron Corp.Estimated reading time: Less than a minute
Ministry of Economic Affairs (MOEA) chief Jong-Chin Shen led a dozen senior Chinese officials on a visit to PCB manufacturer Unimicron Corp. on June 12 to witness the results of the implementation of intelligent manufacturing in PCB production. The tour was coordinated with the Taiwan Printed Circuit Association (TPCA). Among the officials on the tour were: Chih-Ching Yang, deputy director general of Industrial Development Bureau (IDB); Cheng-Chin Lu, director of the Information Technology Industries Division of IDB; and Ren-Dar Yang, executive vice president of the Institute of Information Industry (III).
In the meeting, Unimicron shared its experiences in intelligent manufacturing as well as their application of automation technologies in PCB production. It also made detailed explanations and on-the-spot display of automation in its production line to demonstrate that production status and production parameters can be accurately controlled, and further enhance the tracking and management of products, through intelligent manufacturing.
During the meeting, MOEA Minister Jong-Chin Shen affirmed Unimicron as the pioneer for PCB Industry 4.0. He also expects that the 5G network in the near future will help further enhance the competitiveness of the country’s PCB industry.
Share on:
Testimonial
"The I-Connect007 team is outstanding—kind, responsive, and a true marketing partner. Their design team created fresh, eye-catching ads, and their editorial support polished our content to let our brand shine. Thank you all! "
Sweeney Ng - CEE PCBSuggested Items
IPS, SEL Raise the Bar for ENIG Automation in North America
09/11/2025 | Mike Brask, IPSIPS has installed a state-of-the-art automated ENIG plating line at Schweitzer Engineering Laboratories’ PCB facility in Moscow, Idaho. The 81-foot, fully enclosed line sets a new standard for automation, safety, and efficiency in North American PCB manufacturing and represents one of the largest fully enclosed final finish lines in operation.
Dan Feinberg on Walt Custer: Remembering an Extraordinary Business Associate and Friend
09/09/2025 | Dan Feinberg, Technology Editor, I-Connect007The passing of Walt Custer marks the end of an era for all those who knew him and were helped and impressed by his presence, both personally and professionally. Walt's life was characterized by his unwavering commitment to the industry, his profound wisdom and willingness to share it, and his infectious enthusiasm for everything he did.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
09/05/2025 | Andy Shaughnessy, I-Connect007It’s almost fall here in Atlanta, and that means that the temperature is finally dropping. And it quit raining! It’s been raining since March, and I’m so over it, as the social influencers say. Last night we grilled out on the deck, and it wasn’t hot, and we didn’t get rained on. Life is good. It was a busy week in the industry. In this installment of my must-reads, we say goodbye to Walt Custer, the man who made PCB data points interesting for the rest of us.
UHDI Fundamentals: UHDI Technology and Industry 4.0
09/03/2025 | Anaya Vardya, American Standard CircuitsUltra high density interconnect (UHDI) technology is rapidly transforming how smart systems are designed and deployed in the context of Industry 4.0. With its capacity to support highly miniaturized, high-performance, and densely packed electronics, UHDI is a critical enabler of the smart, connected, and automated industrial future. Here, I’ll explore the synergy between UHDI and Industry 4.0 technologies, highlighting applications, benefits, and future directions.
Nolan’s Notes: Everyone Has Their Eye on India
09/03/2025 | Nolan Johnson -- Column: Nolan's NotesIn this issue of SMT007 Magazine, we turn our attention to the Indian EMS market. We start with an interview with David Bergman, whose foresight in the early 2000s opened doors for the Global Electronics Association to begin helping Indian EMS companies with standards and certifications that would give EMS companies a footing to enter a global EMS market.