Share on:

Share on LinkedIn Share on X Share on Facebook Share with email

Testimonial

"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."

Klaus Koziol - atg

Suggested Items

Insoluble Anodes: Process Control for an Ever-shrinking World

11/19/2026 | Movses Gasamanyan, all4-PCB
Every generation of printed circuits asks more of the plating line. Traces are narrower, microvias are smaller, and copper thickness tolerances are tighter. What was once a rounding error now shows up as impedance drift, uneven via fill, and lost yield. At microscopic scale, whatever you don't control ends up controlling you. In a conventional acid copper bath, soluble anodes do two jobs at once: They carry current, and they supply copper ions by dissolving. That second job is the problem.

Voyager Successfully Tests Plume Surface Interaction Simulator

11/16/2026 | BUSINESS WIRE
Voyager Technologies announced the successful Phase II testing of their Floatinator system, a reduced-gravity simulator for terrestrial testing of Plume Surface Interaction (PSI) events.

BAE Systems Successfully Tests Adaptable Deck Launcher for U.S. Navy

10/27/2026 | PRNewswire
BAE Systems successfully completed the first live-fire test of the Adaptable Deck Launcher (ADL), a missile launching solution that significantly increases combat capabilities and operational adaptability across the U.S. Navy and allied fleets.

Faster BGA Warpage Processing Without Shearing or Painting

10/21/2026 | Chris Gastaldo and Neil Hubble, Akrometrix
The process of measuring BGA samples for thermal warpage is subject to industry standards from both JEDEC, in JESD22-B112C and JEITA ED7306. Additionally, these standards establish allowable warpage values based on ball size and ball pitch, for the JEDEC standard, pass/fail further established in JEDEC SPP-024.3 Standard practice in these standards for measuring BGA warpage is to remove the solder balls in order to measure only the substrate surface. However, as both ball size and package thickness decrease, the practicality of removing solder balls without altering the sample shape has become increasingly challenging.

United Electronics Corporation Installs New Automated Pumice Surface Preparation Line

10/08/2026 | United Electronics Corporation
New Circuit Tech International Pumice Line and 50-Panel Unloader Deliver Consistently Prepared Copper for Stronger Solder Mask Adhesion
Copyright © I-Connect007 | IPC Publishing Group Inc. All rights reserved. Log in