Mobility Lab Helps Fight Motion Sickness in Self-Driving Cars
July 2, 2019 | Eindhoven University of TechnologyEstimated reading time: 3 minutes

Autonomous cars are safer to drive and offer passengers the opportunity to relax, sit back and enjoy while being transported to their destination. There is a drawback, though. Many people experience motion sickness when reading or watching a movie in a moving car.
Image Caption: The Vibrotactile Display with Active Movement Mechanism (VDAM) combines vibrations in the forearm and through moveable plates in the chair
Two Malaysian researchers at the faculty of Industrial Design of the Eindhoven University of Technology, Nidzamuddin Md. Yusof and Juffrizal Karjanto, have found ways to alleviate this problem by increasing the so-called passengers’ situational awareness. To test their solution they built a Mobility Lab, a special car outfitted with instruments that simulates an autonomous car. Md. Yusof and Karjanto will defend their dissertations on July 3th and 4th at the TU/e.
In a fully automated vehicle, human drivers become passengers. While the car handles all driving tasks and decisions, they have the freedom to engage in work, socializing or leisure activities. However, once involved in non-driving tasks, people tend to become unaware of the intentions of the vehicle. As a result, they are unprepared for the forces generated from acceleration, braking or turning. For many people this leads to motion sickness, a serious problem that may hamper the further development of self-driving cars.
This may be solved by letting autonomous cars drive in a more defensive manner, avoiding abrupt changes in direction or speed. However, in an urban environment with many junctions and corners, this is not a solution.
Mobility Lab
To provide a better alternative, the two researchers developed four non-intrusive devices that inform the passenger about his whereabouts without the need to look outside. Two devices provided peripheral information through a visual display, the other two through haptic feedback. They tested their devices in a specially outfitted car, the Mobility Lab, that simulates an automated car in real life. This provided them with much more relevant results than traditional simulators.
Peripheral visual feedforward system (PVFS): (left) Positioning inside the Mobility Lab; (right) Light moving from bottom to top on the right side to indicate that the fully automated vehicle is about to turn to the right.
The devices were tested on around 20 passengers each, with every participant undergoing three separate one-hour sessions where they had to either watch a movie or read a book on a tablet. The results show that all four systems increased the situation awareness of the participants. Two devices also managed to reduce symptoms of motion sickness: the Peripheral Visual Feedforward System (PVFS) (for participants who watched a movie), and the Vibrotactile Display with Active Movement Mechanism (VDAM) (for participants who read a book on a tablet).
The PVFS consists of two rows of 32 LED lights left and right of the movie screen, that inform the passenger in an unobtrusive way of the intended turn of the car. The VDAM conveys information about the car’s intentions by vibrations in the forearm and through moveable plates in the chair.
Future Design
The researchers hope their work contributes to the design of future interfaces inside the interiors of automated vehicles. “We mainly focused on the vehicle’s technology and its impact on motion sickness, but the development of a sustainable product should also take into account the passengers’ comfort and experience. This requires the input from different educational and experience backgrounds.”
The Mobility Lab will remain at the Department of Industrial Design in the TU/e, and will be used for further research into the design of self-driving cars. In addition, an identical version of the Mobility Lab will be developed at the Universiti Teknikal Malaysia Melaka, with collaboration from TU/e, focusing on Asian users.
Suggested Items
American Standard Circuits to Exhibit and Speak at SMTA Oregon Expo
05/14/2025 | American Standard CircuitsAnaya Vardya, President, and CEO of American Standard Sunstone Circuits has announced that his company will be exhibiting SMTA Oregon Expo & Tech Forum to be held on May 20 at the Wingspan Events and Conference Center in Hillsboro, Oregon.
indie Semiconductor Reports Q1 2025 Results
05/13/2025 | BUSINESS WIREindie Semiconductor, Inc., an automotive solutions innovator, today announced first quarter results for the period ended March 31, 2025. Q1 revenue was up 3.3 percent year-over-year to $54.1 million with Non-GAAP gross margin of 49.5 percent. On a GAAP basis, first quarter 2025 operating loss was $38.9 million compared to $49.6 million a year ago.
Elementary, Mr. Watson: Design Data Packages—Circle of Concern or Circle of Influence?
05/14/2025 | John Watson -- Column: Elementary, Mr. WatsonI've often been asked, "Can you have a perfect PCB design?" At first blush, it seems like the answer should be yes. After all, if you follow all the rules, double-check your work, and use the right tools, it should be perfect. Right?
Siemens Leverages AI to Close Industry’s IC Verification Productivity Gap in New Questa One Smart Verification Solution
05/13/2025 | SiemensSiemens Digital Industries Software announced the Questa™ One smart verification software portfolio, combining connectivity, a data driven approach and scalability with AI to push the boundaries of the Integrated Circuit (IC) verification process and make engineering teams more productive.
Beyond the Board: Empowering the Next Generation of Tech Innovators in Electronics
05/13/2025 | Jesse Vaughan -- Column: Beyond the BoardThe electronics industry is at the heart of technological progress, driving innovative advancements that shape our world. Yet, despite the sector's rapid evolution, it faces a looming challenge: attracting and retaining young talent. With an aging workforce and an increasing demand for skilled professionals, the industry must find ways to inspire the next generation of innovators.