Dan’s Biz Bookshelf: ‘Abundance: How We Build a Better Future’
Trouble in Your Tank: In Complex Systems, Design Rules Aren’t Optional
It’s Only Common Sense: The Phone Is Still Your Competitive Advantage
Window Film Could Even out the Indoor Temperature Using Solar Energy
July 8, 2019 | CHALMERS UNIVERSITY OF TECHNOLOGYEstimated reading time: 2 minutes
A window film with a specially designed molecule could be capable of taking the edge off the worst midday heat and instead distributing it evenly from morning to evening. The molecule has the unique ability to capture energy from the sun’s rays and release it later as heat.
On sunny summer days, it can be little short of unbearable to stay indoors or in cars. The heat radiates in and creates an unpleasantly high temperature for people, animals, and plants. Using energy-intensive systems such as air conditioning and fans means combating the thermal energy with other forms of energy. Researchers at Chalmers University of Technology are proposing a method that utilises the heat and distributes it evenly over a longer period instead.
When their specially designed molecule is struck by the sun’s rays it captures photons and simultaneously changes form—it is isomerised. When the sun stops shining on the window film the molecules release heat for up to eight hours after the sun has set.
“The aim is to create a pleasant indoor environment even when the sun is at its hottest, without consuming any energy or having to shut ourselves behind blinds. Why not make the most of the energy that we get free of charge instead of trying to fight it,” says chemist Kasper Moth-Poulsen, who is leading the research.
At dawn when the film has not absorbed any solar energy it is yellow or orange since these colours are the opposite of blue and green, which is the light spectrum that the researchers have chosen to capture from the sun. When the molecule captures solar energy and is isomerised, it loses its colour and then becomes entirely transparent. As long as the sun is shining on the film it captures energy, which means that not as much heat penetrates through the film and into the room. At dusk, when there is less sunlight, heat starts to be released from the film and it gradually returns to its yellow shade and is ready to capture sunlight again the following day.
“For example, airports and office complexes should be able to reduce their energy consumption while also creating a more pleasant climate with our film, since the current heating and cooling systems often do not keep up with rapid temperature fluctuations,” says Moth-Poulsen.
The molecule is part of a concept the research team calls MOST, which stands for ‘Molecular Solar Thermal Storage’. Previously the team presented an energy system for houses based on the same molecule (see the related press release below). In that case—after the solar energy had been captured by the molecule—it could be stored for an extended period, such as from summer to winter, and then used to heat an entire house. The researchers realised that they could shorten the step to application by optimising the molecule for a window film as well, which would also create better conditions for the slightly more complex energy system for houses.
What the researchers still have to do is to increase the concentration of the molecule in the film whilst also retaining the film’s properties, and bring down the price of the molecule. But according to Moth-Poulsen they are very close to this innovation.
“The step to applying our film is so short that it could happen very soon. We are at a very exciting stage with MOST,” he says.
Share on:
Subscribe
Stay ahead of the technologies shaping the future of electronics with our latest newsletter, Advanced Electronics Packaging Digest. Get expert insights on advanced packaging, materials, and system-level innovation, delivered straight to your inbox.
Subscribe now to stay informed, competitive, and connected.
Suggested Items
Insulectro: Advanced PCB Fabrication Materials
04/23/2026 | Real Time with... APEX EXPOExplore advanced PCB fabrication materials with Insulectro's Dain Hertsgaard and Gabriel Zepeda. This interview covers Arlon's innovative polyimide and epoxy solutions, including low-flow options for flex materials and high-performance materials for HDI applications; Qnity's polyimide films for demanding environments, and DuPont Interra's capacitance films for enhanced reliability. Insulectro offers comprehensive service and a commitment to advancing circuit technology
Siborg LCR-Reader Professional Multimeter
04/16/2026 | Real Time with... APEX EXPOMichael Obrecht showcases the LCR-Reader professional benchtop multimeter from Siborg Systems Inc. Obrecht discusses the compact, Canadian-made device that offers the functionality of expensive benchtop meters at an accessible price. He details versatile measurement capabilities, including LCR, ESR, resistance, capacitance, and advanced features like signal generation and oscilloscope mode.
The Future of Reflow Soldering Is Here
04/16/2026 | Real Time with... APEX EXPOMichael Hanke discusses how Rehm Thermal Systems is revolutionizing thermal solutions in electronics assembly with their innovative flux-free, no-clean soldering process. This is truly a game changing process that eliminates chamber cleaning and streamlines production. Developed with paste suppliers, this advanced technology promises significant time and cost savings while ensuring high-quality results.
Take the Mic: Smart and Flexible SMT Solutions from Essemtec
04/03/2026 | Real Time with... APEX EXPOEssemtec is known for naturally adaptive machines inspired by nature and designed for advanced HDI as well as package substrate manufacturing. Pierre-Jean Cancalon discusses new 2K dispensing and high-speed solder paste jetting technologies, perfect for NPI prototyping and flexible production environments.
Viscom AI Inspection Technology Explained
03/26/2026 | Real Time with... APEX EXPOJesper Lykke discusses how AI revolutionizes automated inspection and programming, significantly enhancing speed and accuracy. Viscom's V-Vision and ProVision software, featuring advanced AI integration.solutions for industry challenges like miniaturization and large circuit board inspection, serve the booming demand for data center and backplane boards.
Copyright © I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in